Debris flows are a major geological hazard in mountainous regions. For improving mitigation, it is important to study the spatial distribution and factors controlling debris flows. In the Bailong River Basin, central China, landslides and debris flows are very well developed due to the large differences in terrain, the complex geological environment, and concentrated rainfall. For analysis, 52 influencing factors, statistical, machine learning, remote sensing and GIS methods were used to analyze the spatial distribution and controlling factors of 652 debris flow catchments with different frequencies. The spatial distribution of these catchments was divided into three zones according to their differences in debris flow frequencies. A comprehensive analysis of the relationship between various factors and debris flows was made. Through parameter optimization and feature selection, the Extra Trees classifier performed the best, with an accuracy of 95.6%. The results show that lithology was the most important factor controlling debris flows in the study area (with a contribution of 26%), followed by landslide density and factors affecting slope stability (road density, fault density and peak ground acceleration, with a total contribution of 30%). The average annual frequency of daily rainfall > 20 mm was the most important triggering factor (with a contribution of 7%). Forest area and vegetation cover were also important controlling factors (with a total contribution of 9%), and they should be regarded as an important component of debris flow mitigation measures. The results are helpful to improve the understanding of factors influencing debris flows and provide a reference for the formulation of mitigation measures.

The Bailong River Basin is one of the most developed regions for debris flow disasters worldwide, often causing severe secondary disasters by blocking rivers. Therefore, the early identification of potential debris flow disasters that may block the river in this region is of great significance for disaster risk prevention and reduction. However, it is quite challenging to identify potential debris flow disasters that may block rivers at a regional scale, as conducting numerical simulations for each debris flow catchment would require significant time and financial resources. The purpose of this article is to use public resource data and machine learning methods to establish a relationship model between debris flow-induced river blockage and key influencing factors, thereby economically predicting potential areas at risk for debris flow-induced river blockage disasters. Based on the field investigation, data collection, and remote sensing interpretation, this study selected 12 parameters, including the basin area, basin height difference, relief ratio, circularity ratio, landslide density, fault density, lithology index, annual average frequency of daily rainfall exceeding 40 mm, river width, river discharge, river gradient, and confluence angle, as critical factors to determine whether debris flows will cause river blockages. A relationship model between debris flow-induced river blockage and influencing factors was constructed based on machine learning algorithms. Several machine learning algorithms were compared, and the XGB model performed the best, with a prediction accuracy of 0.881 and an area under the ROC curve of 0.926. This study found that the river width is the determining factor for debris flow blocking rivers, followed by the annual average frequency of daily rainfall exceeding 40 mm, basin height difference, circularity ratio, basin area, and river discharge. The early identification method proposed in this study for river blockage disasters caused by debris flows can provide a reference for the quantitative assessment and pre-disaster prevention of debris flow-induced river blockage chain risks in similar high-mountain gorge areas.