The nanocrystal formation in Zr55Cu30Al15Ni5 bulk metallic glass was studied under heat treatment and deformation. The activation energy of crystallization under heating is 278 kJ/mol. Different crystalline phases were found to be formed during crystallization under heating and deformation. At the first crystallization stage, the metastable phase with a hexagonal structure (lattice of space group P63/mmc with the parameters a = 8.66 Å, c = 14.99 Å) is formed under heat treatment. When the temperature rises, the metastable phase decays with the formation of stable crystalline phases. The crystalline Zr2Cu phase with the lattice of space group Fd3m is formed during crystallization under the action of deformation. It was determined that during deformation nanocrystals are formed primarily in the subsurface regions of the samples.
1 August 2019 in Journal of Physics: Conference Series
The crystalline phases formed during quenching of Zr–based amorphizing alloy; depending on the sample, sizes and position in it, have been identified. The samples of amorphous, partially crystalline, and crystalline alloys have been obtained by levitation melting and quenching into a copper mould of variable diameter.
1 January 2019 in Vektor nauki Tol'yattinskogo gosudarstvennogo universiteta
Bulk amorphous Zr-based alloys are promising for their high mechanical properties and thermal stability. The predominate component of Zr in the alloy significantly improves its strength, ductility, corrosion resistance and melting point, which is important when creating various structural materials. The obtainment bulk of Zr-based alloys with an amorphous structure is not a trivial goal, but requires an ad hoc approach as the high degree of Zr oxidation and the necessary high rates of melt cooling limit realization of the amorphous state. At an insufficient cooling rate during quenching, the crystalline phases are formed, which causes change in the properties of the material itself, which in turn affects the field of practical application. Therefore, it is very important to have an idea about the change in a structure during manufacture since many properties of materials are structurally dependent. During the work, the amorphous, partially crystalline and crystalline samples of the amorphized alloy of Zr55Cu30Al10Ni5 composition were obtained by levitation melting and quenching into copper moulds of variable diameter. The crystalline phases formed during quenching depending on the sizes of the sample and position in it were identified. Small differences between the values of interplanar spacing of the formed phases and the tabulated ones, which can be associated with partial substitution of atoms that leads to anisotropic lattice distortions were revealed and explained. In addition, during the work, differences in the phase composition after quenching and under decomposition of the amorphous phase during heating of the alloy of this composition were also revealed.