The possible formation of a nanocrystalline structure in controlled crystallization of a bulk Zr50Ti16Cu15Ni19 amorphous alloy has been studied using differential scanning calorimetry, transmission and high-resolution electron microscopy, and x-ray diffraction. It was established that crystallization of the alloy at temperatures above the glass formation point occurs in two stages and brings about the formation of a nanocrystalline structure consisting of three phases. Local spectral x-ray analysis identified the composition and structure of the phases formed.
The nanocrystal formation in Zr55Cu30Al15Ni5 bulk metallic glass was studied under heat treatment and deformation. The activation energy of crystallization under heating is 278 kJ/mol. Different crystalline phases were found to be formed during crystallization under heating and deformation. At the first crystallization stage, the metastable phase with a hexagonal structure (lattice of space group P63/mmc with the parameters a = 8.66 Å, c = 14.99 Å) is formed under heat treatment. When the temperature rises, the metastable phase decays with the formation of stable crystalline phases. The crystalline Zr2Cu phase with the lattice of space group Fd3m is formed during crystallization under the action of deformation. It was determined that during deformation nanocrystals are formed primarily in the subsurface regions of the samples.
A change in the structure of an amorphous Zr55Cu30Al10Ni5 alloy under deformation by high-pressure torsion (HPT) was studied by X-ray diffraction, high-resolution electron microscopy, scanning electron microscopy, and atomic force microscopy. It was found that the uneven distribution of deformation along the radius of the sample, characteristic of deformation by high-pressure torsion, led to the formation of an inhomogeneous structure. The formation of nanocrystals begins at the periphery of the sample. The threshold value of deformation required for crystallization onset was established; the formation of nanocrystals begins in areas with true deformation e = 4.83 or more. An increase in the deformation degree led to an increase in the height of steps on the deformed sample surface and an increase in the roughness of the surface. The thickness of an elementary step that was formed when one shear band came out to the surface was 10 nm, and its height was about 1 nm. It was found that large steps on the deformed surface of the sample had a complex structure and consisted of a large number of elementary steps. The results obtained are important for analyzing the stress distribution and the concentration of free volume in a deformed material, which affect the parameters of the amorphous-nanocrystalline structure formed.
4 December 2024 in International Journal of Hydrogen Energy
The structure and chemical composition of the phases that form in the controlled crystallization of a bulk amorphous Fe72Al5P10Ga2C6B4Si1 alloy are studied by differential scanning calorimetry, transmission electron microscopy, and x-ray diffraction. It was established that, when the alloy is annealed at a temperature above the glass transition point, a nanocrystalline structure consisting of three phases arises. The magnetic properties of amorphous and nanocrystalline samples were studied with a vibrating-sample magnetometer. The coercive force and saturation magnetization of amorphous samples were found to be 1 Oe and 130 emu/g, respectively. The structure and chemical composition of the forming phases and their correlation with the magnetic properties of the samples were determined.