The effect of free volume on the process of crystallization of an Al87Ni8Gd5 amorphous alloy is investigated. The deformation of the amorphous alloys leads to the formation of shear bands, which contain an enhanced free volume concentration. To retain the free volume the amorphous alloy was coated with a layer of a refractory metal. The structure of the Al87Ni8Gd5 alloy with a protective Ta coating was studied by X-ray diffraction and transmission electron microscopy methods. The fraction of the nanocrystalline phase formed in the amorphous samples with a protective Ta coating under annealing was found to be larger than that in the uncoated samples. The size of Al nanocrystals formed in the coated and uncoated samples is the same. A higher rate of crystal nucleation in the deformed amorphous samples with a protective coating is caused by a higher diffusion coefficient due to an enhanced free volume concentration.
1 March 2007 in Materials Science and Engineering: A
This work is devoted to a brief overview of the structure and properties of amorphous-nanocrystalline metallic alloys. It presents the current state of studies of the structure evolution of amorphous alloys and the formation of nanoglasses and nanocrystals in metallic glasses. Structural changes occurring during heating and deformation are considered. The transformation of a homogeneous amorphous phase into a heterogeneous phase, the dependence of the scale of inhomogeneities on the component composition, and the conditions of external influences are considered. The crystallization processes of the amorphous phase, such as the homogeneous and heterogeneous nucleation of crystals, are considered. Particular attention is paid to a volume mismatch compensation on the crystallization processes. The effect of changes in the amorphous structure on the forming crystalline structure is shown. The mechanical properties in the structure in and around shear bands are discussed. The possibility of controlling the structure of fully or partially crystallized samples is analyzed for creating new materials with the required physical properties.
X-ray diffraction and scanning electron microscopy were used to study changes in the structure of amorphous alloys under deformation by high-pressure torsion and multiple rolling. The change in mean nearest neighbor distance (the radius of the first coordination sphere) under deformation was determined. During deformation, shear bands are formed in amorphous alloys, which are regions of lower density compared to the surrounding undeformed amorphous matrix. Shear bands are zones of increased free volume, in which crystallization processes are facilitated. The change in the proportion of free volume under deformation of various types was estimated. The formation of shear bands leads to the appearance of steps on the surface of the samples. The number of shear bands and the surface morphology of deformed amorphous alloys were determined by the type of deformation and the physical properties of the material. The results obtained are discussed within the concept of free volume in the amorphous phase.
The nanocrystal formation in Zr55Cu30Al15Ni5 bulk metallic glass was studied under heat treatment and deformation. The activation energy of crystallization under heating is 278 kJ/mol. Different crystalline phases were found to be formed during crystallization under heating and deformation. At the first crystallization stage, the metastable phase with a hexagonal structure (lattice of space group P63/mmc with the parameters a = 8.66 Å, c = 14.99 Å) is formed under heat treatment. When the temperature rises, the metastable phase decays with the formation of stable crystalline phases. The crystalline Zr2Cu phase with the lattice of space group Fd3m is formed during crystallization under the action of deformation. It was determined that during deformation nanocrystals are formed primarily in the subsurface regions of the samples.