The uniform dispersion of graphene oxide (GO) and strong interfacial bonding are the key factors in achieving the high mechanical strength of GO/polymer composites. It is still challenging to prepare GO/PA66 composites with uniform GO dispersion by the in situ polymerization method. In this paper, we prepare GO/PA66 salt nanocomposite by in situ precipitating PA66 salt with GO in ethanol. The GO/PA66 nanocomposite fibers are then fabricated using the as-prepared GO/PA66 salt by in situ polymerizing and melt spinning. By tuning the GO content, the tensile strength and Young’s modulus of the GO/PA66 fibers are increased from 265 ± 18 to 710 ± 14 MPa (containing 0.3 wt% GO) and from 1.1 ± 0.08 to 3.8 ± 0.19 GPa (containing 0.5 wt% GO), respectively. The remarkable improvements are attributed to the uniform dispersion of GO in the GO/PA66 salt nanocomposite via ionic bonding and hydrogen bonding in the in situ precipitation process, and the covalent interfacial bonding between the GO and PA66 during the in situ polymerization process. This work sheds light on the easy fabrication of high-performance PA66-based nanocomposites.
19 September 2024 in ACS Applied Materials & Interfaces
Our first-principles calculations show that a change of carrier type from electron to hole can be achieved in monolayer epitaxial graphene on SiC( ) by fluorine (F) intercalation. The p-doping level in graphene, however, is not monotonously enhanced as the F coverage increases, and an interesting interface magnetism is observed at the partially passivated interface. Because intercalated F atoms prefer to bond to the substrate than to the graphene, F-intercalation provides a promising way of “interface modulation doping” to tailor the electronic properties of epitaxial graphene on SiC( ) without appreciably degrading its intrinsic high mobility.
5 January 2024 in Composites Science and Technology