Herein, we prepared a novel photocatalytic ZnO-TiO₂ loaded carbon nanofibers composites (ZnO-TiO₂-CNFs) via electrospinning technique followed by a hydrothermal process. At first, the electrospun TiO₂ NP-embedded carbon nanofibers (TiO₂-CNFs) were achieved using electrospinning and a carbonization process. Next, the ZnO particles were grown into the TiO₂-CNFs via hydrothermal treatment. The morphology, structure, and chemical compositions were studied using state-of-the-art techniques. The photocatalytic performance of the ZnO-TiO₂-CNFs composite was studied using degrading methylene blue (MB) under UV-light irradiation for three successive cycles. It was noticed that the ZnO-TiO₂-CNFs nanocomposite showed better MB removal properties than that of other formulations, which might be due to the synergistic effects of carbon nanofibers and utilized metal oxides (ZnO and TiO₂). The adsorption characteristic of carbon fibers and matched band potentials of ZnO and TiO₂ combinedly help to boost the overall photocatalytic performance of the ZnO-TiO₂-CNFs composite. The obtained results from this study indicated that it can be an economical and environmentally friendly photocatalyst.

Solar energy is regarded as the finest clean and green energy generation method to replace fossil fuel-based energy and repair environmental harm. The more expensive manufacturing processes and procedures required to extract the silicon utilized in silicon solar cells may limit their production and general use. To overcome the barriers of silicon, a new energy-harvesting solar cell called perovskite has been gaining widespread attention around the world. The perovskites are scalable, flexible, cost-efficient, environmentally benign, and easy to fabricate. Through this review, readers may obtain an idea about the different generations of solar cells and their comparative advantages and disadvantages, working mechanisms, energy alignment of the various materials, and stability achieved by applying variable temperature, passivation, and deposition methods. Furthermore, it also provides information on novel materials such as carbonaceous, polymeric, and nanomaterials that have been employed in perovskite solar in terms of the different ratios of doping and composite and their optical, electrical, plasmonic, morphological, and crystallinity properties in terms of comparative solar parameters. In addition, information on current trends and future commercialization possibilities of perovskite solar have been briefly discussed based on reported data by other researchers.

Air is the most crucial and life-supporting input from nature to the living beings of the planet. The composition and quality of air significantly affects human health, either directly or indirectly. The presence of some industrially released gases, small particles of anthropogenic origin, and the deviation from the normal composition of air from the natural condition causes air pollution. Volatile organic compounds (VOCs) are common contaminants found as indoor as well as outdoor pollutants. Such pollutants represent acute or chronic health hazards to the human physiological system. In the environment, such polluted gases may cause chemical or photochemical smog, leading to detrimental effects such as acid rain, global warming, and environmental pollution through different routes. Ultimately, this will propagate into the food web and affect the ecosystem. In this context, the efficient removal of volatile organic compounds (VOCs) from the environment remains a major threat globally, yet satisfactory strategies and auxiliary materials are far from being in place. Metal–organic frameworks (MOFs) are known as an advanced class of porous coordination polymers, a smart material constructed from the covalently bonded and highly ordered arrangements of metal nodes and polyfunctional organic linkers with an organic–inorganic hybrid nature, high porosities and surface areas, abundant metal/organic species, large pore volumes, and elegant tunability of structures and compositions, making them ideal candidates for the removal of unwanted VOCs from air. This review summarizes the fundamentals of MOFs and VOCs with recent research progress on MOF-derived nanostructures/porous materials and their composites for the efficient removal of VOCs in the air, the remaining challenges, and some prospective for future efforts.

Silicon carbide (SiC) is a very promising carbide material with various applications such as electrochemical supercapacitors, photocatalysis, microwave absorption, field-effect transistors, and sensors. Due to its enticing advantages of high thermal stability, outstanding chemical stability, high thermal conductivity, and excellent mechanical behavior, it is used as a potential candidate in various fields such as supercapacitors, water-splitting, photocatalysis, biomedical, sensors, and so on. This review mainly describes the various synthesis techniques of nanostructured SiC (0D, 1D, 2D, and 3D) and its properties. Thereafter, the ongoing research trends in electrochemical supercapacitor electrodes are fully excavated. Finally, the outlook of future research directions, key obstacles, and possible solutions are emphasized.

Heavy metal poisoning has a life-threatening impact on the human body to aquatic ecosystems. This necessitates designing a convenient green methodology for the fabrication of an electrochemical sensor that can detect heavy metal ions efficiently. In this study, boron (B) and nitrogen (N) co-doped laser-induced porous graphene (LIG_BN) nanostructured electrodes were fabricated using a direct laser writing technique. The fabricated electrodes were utilised for the individual and simultaneous electrochemical detection of lead (Pb²⁺) and cadmium (Cd²⁺) ions using a square wave voltammetry technique (SWV). The synergistic effect of B and N co-doping results in an improved sensing performance of the electrode with better sensitivity of 0.725 µA/µM for Pb²⁺ and 0.661 µA/µM for Cd²⁺ ions, respectively. Moreover, the sensing electrode shows a low limit of detection of 0.21 µM and 0.25 µM for Pb²⁺ and Cd²⁺ ions, with wide linear ranges from 8.0 to 80 µM for Pb²⁺ and Cd²⁺ ions and high linearity of R² = 0.99 in case of simultaneous detection. This rapid and facile method of fabricating heteroatom-doped porous graphene opens a new avenue in electrochemical sensing studies to detect various hazardous metal ions.

Reusing or recycling waste into new useful materials is essential for environmental protection. Herein, we used discarded polystyrene (PS) and fly-ash (FA) particles and a fabricated fly-ash incorporated polystyrene fiber (FA/PS fiber) composite. The electrospinning process produced continuous PS fibers with a good distribution of FA particles. The prepared nanofibers were characterized by state-of-the-art techniques. The performances of the composite nanofibers were tested for fire-retardant applications. We observed that the incorporation of FA particles into the PS fibers led to an improvement in the performance of the composite as compared to the pristine PS fibers. This study showed an important strategy in using waste materials to produce functional nanofibers through an economical procedure. We believe that the strategy presented in this paper can be extended to other waste materials for obtaining nanofiber membranes for various environmental applications.