Heavy metal poisoning has a life-threatening impact on the human body to aquatic ecosystems. This necessitates designing a convenient green methodology for the fabrication of an electrochemical sensor that can detect heavy metal ions efficiently. In this study, boron (B) and nitrogen (N) co-doped laser-induced porous graphene (LIG_BN) nanostructured electrodes were fabricated using a direct laser writing technique. The fabricated electrodes were utilised for the individual and simultaneous electrochemical detection of lead (Pb²⁺) and cadmium (Cd²⁺) ions using a square wave voltammetry technique (SWV). The synergistic effect of B and N co-doping results in an improved sensing performance of the electrode with better sensitivity of 0.725 µA/µM for Pb²⁺ and 0.661 µA/µM for Cd²⁺ ions, respectively. Moreover, the sensing electrode shows a low limit of detection of 0.21 µM and 0.25 µM for Pb²⁺ and Cd²⁺ ions, with wide linear ranges from 8.0 to 80 µM for Pb²⁺ and Cd²⁺ ions and high linearity of R² = 0.99 in case of simultaneous detection. This rapid and facile method of fabricating heteroatom-doped porous graphene opens a new avenue in electrochemical sensing studies to detect various hazardous metal ions.

The rapid expansion of industrial activities has resulted in severe environmental pollution manifested by organic dyes discharged from the food, textile, and leather industries, as well as hazardous gas emissions from various industrial processes. Titanium dioxide (TiO₂)-nanostructured materials have emerged as promising candidates for effective photocatalytic dye degradation and gas sensing applications owing to their unique physicochemical properties. This study investigates the development of a photocatalyst and a liquefied petroleum gas (LPG) sensor using hydrothermally synthesized globosa-like TiO₂ nanostructures (GTNs). The synthesized GTNs are then evaluated to photocatalytically degrade methylene blue dye, resulting in an outstanding photocatalytic activity of 91% degradation within 160 min under UV light irradiation. Furthermore, these nanostructures are utilized to sense liquefied petroleum gas, which attains a superior sensitivity of 7.3% with high response and recovery times and good reproducibility. This facile and cost-effective hydrothermal method of fabricating TiO₂ nanostructures opens a new avenue in photocatalytic dye degradation and gas sensing applications.

Resin-based separation techniques are utilised for the extraction of metals. However, separation of rare earth elements in ultrapure form by using resins is difficult due to similarity in chemical properties of rare earth elements. An attempt has been made to improve the selectivity of resin for the extraction of rare earth elements by using di-2-ethylhexyl phosphoric acid (D2EHPA). D2EHPA treated macroporous chloromethylated styrene divinyl benzene resin has been prepared and its potential to extract rare earth elements such as praseodymium and neodymium has been investigated. The extraction of neodymium was marginally higher than praseodymium. However, stripping of neodymium was significantly higher as compared to stripping of praseodymium in both hydrochloric acid and sulphuric acid media. The properties of the resins have also been studied by using various instrumental techniques such as thermogravimetry-differential thermal analysis, scanning electron microscopy and Fourier transform infra-red spectroscopy. GRAPHICAL ABSTRACT

The corrosion inhibition behavior of cetyl pyridinium chloride (CPC) on mild steel (MS) in 0.5 M H₂SO₄ solution was examined using the weight loss method and potentiodynamic polarization method. The experimented MS surface was characterized by Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and Atomic Force Microscopy (AFM). Corrosion rate and corrosion efficiency was calsulated via weight loss and potentiodynamic polarization methods where the corrosion rate in 0.5 M H₂SO₄ , 0.000192 M, and 0.0077 M of CPC solution was 12.09×10^-3, 8.23×10^-3, 6.63×10^-5 (mm/Year), respectively and the inhibition efficiency of 94.42% and 98.54%. FESEM studies demonstrated the corrosion attack on MS surface. Also, the EDX showed the presence of nitrogen of CPC. Thus, CPC acts as an important corrosion inhibitor.

1. Surfactants, also known as surface-active agents, have efficient wetting and emulsifying properties. The surface-tension-reducing property of surfactants enables them to mix with other substance...