Cu2MnSnS4 (CMTS) is acknowledged as an alternative to traditional semiconductors. The structure and microstructure of synthetic CMTS depend on, among other things, the types of sulfur sources used. Traditionally obtained CMTS mostly has a tetragonal structure. In this study, the effect of using thiourea (Tu) or Na2S as a sulfur source on the product structure was compared using hydrothermal synthesis at 190 °C for 7 days (ethylene glycol with water in the presence of poly(vinylpyrollidone) was used as a solvent). When Tu was used, CMTS precipitated in the form of concentric microspheres, 1–1.5 µm in size, consisting of hexagonal (in the cores) and tetragonal (the rims) forms. Most probably, the rapidly formed hexagonal nucleus was later surrounded by a slower-forming rim with a tetragonal structure. In contrast, when Na2S was used as a precursor, microspheres were not formed and a fine crystalline material with a homogeneous tetragonal structure was obtained. This allowed for the choice of micromorphology and product structure during synthesis.
In this study, we used a hydrothermal method to synthesize microspheres of Cu2(Mn1−xFex)SnS4 solid solution (X = 1, 0.8, 0.6, 0.4, 0.2, 0). The process was optimized to improve the crystallinity, morphology, and purity of the obtained materials. All samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Raman spectroscopy, and Fourier transform infrared (FTIR) spectroscopy. The following conditions were optimized: A mixture of water and ethylene glycol at the ratio of 1:7 as the reaction medium, polyvinylpyrrolidone (PVP) as the surface ligand, and reaction temperature of 195 °C for 7 days. The product of synthesis precipitated in the form of aggregates of nanocrystals, which form homogeneous, often concentric microspheres with a diameter of 1–1.5 μm. The chemical composition of the product can be well controlled by the chemical composition of the reactants. The compound Cu2(Mn1−xFex)SnS4 forms a continuous series of solid solutions.
Environmental education, implemented at both formal and informal levels, plays a significant role in the transformation process towards a Circular Economy (CE). In the Baltic Sea Region (BRS), the significant role of the forestry sector is worth noting, as it contributes to strengthening the CE agenda through the sustainable and circular management of wood processing waste. However, currently, environmental education on the potential uses of this waste, for the general public (including youth), students, and professionals, is quite limited. Therefore, this paper presents a conceptual approach to developing an education roadmap. The scope of work includes identifying the education gap in the forestry sector using a questionnaire survey among residents of the Baltic Sea Region, and then developing a concept for an education roadmap consistent with the CE assumptions. The presented concept of roadmap is a comprehensive document that analyses the educational needs, challenges, and opportunities related to the sustainable use of forest biomass in a given region. Strategic assumptions and educational priorities were identified and implemented in this document. Our findings contribute to aligning forestry education with broader environmental and economic goals in the Baltic Sea Region and beyond. This study supports the achievement of Sustainable Development Goals 4 (Quality Education), 12 (Responsible Consumption and Production), and 15 (Life on Land) by providing practical insights for advancing circular economy education in natural resource management.
The wide range of colored wastewater from industries in the aquatic environment poses a great threat to human and animal health and poses a great obstacle to the ecological ecosystem. Therefore, an effective, efficient, and environment-friendly treatment methods are being sought. Hydroxyl- phosphate and arsenate compounds have recently attracted attention for magnetic and photocatalytic applications in photoreactions with visible light. They can be a promising alternative to TiO2, in which the photoabsorption spectrum is in the range of ultraviolet (UV) light owing to its large bandgap, which accounts for only 5% of the sunlight. Here, we present a detailed analysis of the properties of libethenite Cu2PO4OH - olivenite Cu2AsO4OH solid solution series, and their photocatalytic activities under visible light. Seven compounds of the solid solution series were successively synthesized by the wet chemical method at 70°C according to the results of Fourier-transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) tests. The photocatalytic performance of the samples was thoroughly investigated for the degradation of methylene blue MB solutions under visible light and measurements by UV-vis spectroscopy. We demonstrated the useful photocatalytic activity of these complex structures for the degradation of methylene blue (MB) dye under visible-light irradiation. The substitution effect of [PO4]3− anions by [AsO4]3− results in changes in the bonds of the OH group, which are the origin of the photocatalytic properties of this material, altering the bond length and geometry. In addition, these substitutions affected the morphology of the precipitating solids, which changed the surface area of the material. This way the substitution of As with P in the solid solution series affected the photocatalytic properties The MB degradation efficiency after 6h declines from ~ 84 % for the Cu2AsO4OH and Cu2PO4OH down to ~81% for intermediate member. The present work provides insights leading to a better understanding of the photocatalytic performance of Cu2PO4OH and Cu2AsO4OH. Thanks to these results it may be beneficial to prepare more efficient photocatalysts based on this material for sunlight photocatalysis, which will also be helpful in designing and preparing novel technologies. This research was funded by NCN research grant no. 2021/41/N/ST10/03566