Since ash from wood biomass mostly ends up in landfills, recent research has focused on finding its economic and environmental added value as a potential new raw material in the construction industry. However, for wood ash to be used on an industrial scale in construction, a strategy for its proper storage must be defined. Proper storage of WBA is important to ensure quality control for applications in cementitious composites. This work investigated the aging of wood biomass ash (WBA) collected from five different power plants in Croatia and its influence on the performance of cementitious composites. WBA and cement pastes were investigated at different aging times (up to one year) using thermogravimetric analysis (TGA), powder X-ray diffraction (XRD), isothermal calorimetry and initial and final setting times. The results showed that storage of WBA in closed and open containers resulted in carbonation and hydration of mainly free lime and periclase, respectively, which affected the reactivity and setting times of WBA cement pastes.
Wood biomass ash (WBA) represents an environmental and economic problem for energy producers, and there have been extensive studies of using WBA as a raw material in construction products. This study investigates the leaching characteristics of WBA cement composites based on testing results. Currently, 70% of WBA is landfilled, and the rest is primarily used in agriculture; therefore, this study also addresses the leaching as a component of environmental safety of these two primary WBA management approaches. An analysis of the leaching characteristics of WBA, monolithic, and crushed cement composites is performed by replacing 15% of the cement with WBA. The study was conducted using three WBA samples collected from different power plants. Increased values of leaching from the WBA itself are indicative of potential issues that could occur in the case of its disposal. The study concluded that the WBA could be potentially environmentally acceptable as a raw material in the concrete industry because the heavy metals are stabilized within the cement matrix.
Downsizing fossil fuel dependence and greenhouse gas emissions is at the forefront of a sustainable future. The expansion of renewable energy while striving to minimize dependence on fossil fuels has led to biomass taking the lead among renewable energy sources, with wood having the broadest application. Along with the growing trend of using biomass as a renewable energy source, the combustion of wood biomass results in wood biomass ash (WBA), leading to compelling amounts of waste. In this study, the technical feasibility of fly WBA from different Croatian power plants was analyzed to evaluate its potential use in precast concrete drainage elements and curb units. By implementing a performance-based design, the influence of various factors in thermal processing of wood biomass was investigated, together with a detailed characterization of WBA in order to assess the feasibility of using WBA as a secondary raw material in a large-scale industrial batching plant. The compressive strength and durability properties (water absorption, permeability, and freeze–thaw resistance) of concrete mixtures with WBA as a replacement for 15 wt% cement were evaluated and compared with the precast concrete manufacturer’s technical requirements. The main concerns identified were compositional inconsistency of WBA, workability downturn, delay in initial reactivity rate, and increased water absorption. Concrete with WBA based on a circular design has been found to be a viable solution to cement depletion, stepping up from recycling to reuse of industrial waste.
Reducing greenhouse gas emissions and dependence on fossil fuels is the cornerstone of all European climate and energy strategies. Consequently, renewable energy sources are becoming more competitive with fossil fuels. The largest source of bioenergy in the European Union is biomass-fired power plants. Therefore, the European coal phase-out strategy led to an increased use of wood biomass as a sustainable fuel, generating large amounts of wood biomass ash (WBA). In the research studies reported so far, WBA has been mainly used in cementitious composites. However, given the similarities between the chemical composition of WBA and hydraulic lime (HL), this research focused on its potential classification as a building lime. Overall, three different sources of fly WBA were considered for the preparation of binders as mixtures of WBA and coal fly ash (CFA) in different ratios. The contribution of each binder mixture on the paste and mortar properties was analyzed based on the chemical composition, setting time, volume stability, and contribution to the mortar strength (compressive and flexural). In general, it can be concluded that the studied binders can meet the criteria of EN 459-1. However, special attention should be paid to the volume deformations and the setting time.
1 January 2021 in Journal of the Croatian Association of Civil Engineers
Pozzolanic activity of materials can initially be assumed from the quantity of the pozzolanic oxides SiO2, Al2O3 and Fe2O3. Some of the methods for assessing pozzolanic reactivity of materials include measurement of CaO consumption (Frattini test), decrease in electrical conductivity and pH of a solution containing pozzolanic material, or measurement of an increase in strength of mortar with replacement of cement by pozzolanic material (strength activity index, SAI). The above-mentioned pozzolanicity tests are used in this study to evaluate reactivity of wood biomass fly ashes (WBA-F). The results presented in the paper show that only the SAI method can fully reveal the hydraulic and pozzolanic activity of WBA-F.
1 September 2023 in Journal of the Croatian Association of Civil Engineers