Wood biomass ash (WBA) represents an environmental and economic problem for energy producers, and there have been extensive studies of using WBA as a raw material in construction products. This study investigates the leaching characteristics of WBA cement composites based on testing results. Currently, 70% of WBA is landfilled, and the rest is primarily used in agriculture; therefore, this study also addresses the leaching as a component of environmental safety of these two primary WBA management approaches. An analysis of the leaching characteristics of WBA, monolithic, and crushed cement composites is performed by replacing 15% of the cement with WBA. The study was conducted using three WBA samples collected from different power plants. Increased values of leaching from the WBA itself are indicative of potential issues that could occur in the case of its disposal. The study concluded that the WBA could be potentially environmentally acceptable as a raw material in the concrete industry because the heavy metals are stabilized within the cement matrix.
Agricultural biomass has great bioenergy potential due to its availability, and it is a carbon-free energy source. During biomass incineration, biomass ash is formed, which is still considered as a waste without proper disposal and management solutions. Various biomass ash utilization options were investigated, mainly concerning engineering issues (the mechanical characterization of newly produced building materials or products), and there is a lack of knowledge of environmental issues arising from this “waste” material utilization in civil engineering practice. The main aim of this research is discussion of a different agricultural biomass characteristics as a fuel, the impact of agricultural biomass ashes (ABA) on the mechanical properties of stabilized soil with a particular emphasis on the environmental impacts within this kind of waste management. The results of this study indicate improved geotechnical characteristics of low-plasticity clay stabilized by lime/ABA binder. In addition to mechanical characterization for materials embedded in road embankments and subgrades, appropriate environmental risk assessment needs to be performed, and the results of this study indicate that the amount of ABAs added to the soil for roadworks should not have adverse effects on the soil fauna in the surrounding environment.
Fossil fuels are still widely used today, and exploring more sustainable ways of using coal is crucial. One promising approach is to develop a patented fuel with reduced harmful gas emissions during combustion. This study aims to investigate the properties of the ash produced by burning steam coal mixed with various ratios of patent fuel. The combustion process was carried out using a standard solid fuel boiler with a power output of 70 kW. The ash samples were analyzed using various analytical methods, and ash leaching tests were conducted. The study found that adding patent fuel to coal affects combustion and ash composition. Determining the thermal stability of ash samples showed that adding patent fuel to coal results in decomposition starting earlier and in stronger combustion. The ash produced by patent fuel–coal mixtures contains lower concentrations of Ba, Cr, Ga, Li, Mn, V, and Zn than pure coal combustion. Leaching tests showed that coal ash leachates had higher concentrations of environmental pollutants, such as As, Cd, Co, Mn, Mo, Sb, and U, than patent fuel leachates. Adding patent fuel to coal affects combustion, ash properties, emissions, and disposal. Understanding these implications can help to develop sustainable coal usage and reduce environmental impact.
This three-year study evaluated the effects of various soil amendments on growth parameters and heavy metal (HM) accumulation in above- and belowground biomass of Miscanthus x giganteus (MxG), assessing its phytoremediation potential. A randomised complete block design included four treatments: I—control, II—sludge, III—mycorrhiza, and IV—MxG ash. All experimental pots were filled with soil spiked with Cd (100 mg kg−1) and Hg (20 mg kg−1). Aboveground biomass yield ranged from 3.44 to 5.59 tDM ha−1, with Cd and Hg concentrations in biomass varying from 5.98 to 14.62 mg Cd kg−1 and 41.8 to 383.9 μg Hg kg−1, respectively. Belowground biomass mass ranged from 6.90 to 8.30 tDM ha−1, with Cd and Hg concentrations between 44.3 and 57.2 mg Cd kg−1 and 4.24 to 6.05 mg Hg kg−1, respectively. Enrichment coefficients (EC) in aboveground biomass ranged from 0.060 to 0.146 for Cd and 0.002 to 0.019 for Hg. Belowground biomass EC values ranged from 0.44 to 0.57 for Cd and 0.21 to 0.30 for Hg. The translocation factor (TF) varied from 0.104 to 0.145 for Cd and 0.008 to 0.024 for Hg. Our findings suggest that miscanthus is more effective for heavy metal phytostabilisation and biomass production in moderately contaminated soils than for phytoextraction.
22 June 2012 in Materialwissenschaft und Werkstofftechnik