Mohd Bijarimi Mat Piah

Dr. Mohd Bijarimi Mat Piah

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2012 in Journal of Elastomers & Plastics
Verified
Journal Article
Closed access
MPMohd Bijarimi Mat Piah
Mohd Bijarimi Mat Piah
SASahrim Ahmad
Sahrim Ahmad
RRRozaidi Rasid
Rozaidi Rasid
In this work, we report a melt blend of poly(lactic acid)(PLA)/epoxidized natural rubber (ENR) with liquid natural rubber (LNR). The LNR was synthesized by a photochemical degradation technique and used as a compatibilizer in the PLA/rubber binary blending systems. The PLA/ENR/LNR blends were melt-blended in a Haake internal mixer at 180°C and mixing speed of 50 r. min−1 for 15 min. It was found that the addition of LNR compatibilizer has improved the tensile strength and elongation at break for the compositions of the 40PLA/55ENR/5LNR blend system when compared with a noncompatibilized system (40PLA/55ENR/5NR). The elongation at break for the blend with 5% LNR compatibilizer showed a twofold increment compared with the blend without LNR. The increase in tensile strength and elongation at break were associated with the ability of LNR to promote the uniform dispersion between the natural rubber (NR) and PLA phases as observed in the scanning electron microscopic analysis. Moreover, the differential scanning calorimetric results indicated that the 40PLA/55ENR/5LNR showed the highest degree of crystallinity and thus contributed to improve their mechanical properties. Thermogravimetric analysis showed that two degradation transitions for both compatibilized and noncompatibilized blend systems due to higher degradation temperatures of ENR50 and NR parts. Fourier transform infrared spectroscopic analysis revealed that the PLA/ENR/NR and PLA/ENR/LNR blends were not miscible.

1 January 2016 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
MPMohd Bijarimi Mat Piah
Mohd Bijarimi Mat Piah
SAS. Ahmad
S. Ahmad
RRR. Rasid
R. Rasid
MKM. A. Khushairi
M. A. Khushairi
MZM. Zakir
M. Zakir
The poly(lactic acid) (PLA) was melt blended with linear polyethylene glycol (PEG) in an effort to increase the toughness of PLA. Melt blending was carried out in an internal mixer at 180 °C mixing temperature with 50 rpm for 15 minutes. The blends were characterized in terms of mechanical, thermal and morphological properties. It was found that tensile and flexural strength, stiffness and notched Izod impact strength decreased significantly when the PEG was added to the PLA matrix at 2.5-10% of PEG concentrations. Both glass transition and melting temperatures (Tg and Tm) lowered as the concentration of PEG was increased. Moreover, it was noted that the PLA/PEG blends showed a lower onset and peak degradation temperatures but with lower final degradation temperature as compared to the neat PLA. The morphological analysis revealed that the PEG was dispersed as droplets in the PLA matrix with a clear boundary between PLA matrix and PEG phases.

1 April 2015 in Advances in Polymer Technology
Verified
Journal Article
Closed access
MBMohammad Dalour Hossen Beg
Mohammad Dalour Hossen Beg
SKS. Kormin
S. Kormin
MPMohd Bijarimi Mat Piah
Mohd Bijarimi Mat Piah
HZHaydar U. Zaman
Haydar U. Zaman

16 July 2013 in Journal of Reinforced Plastics and Composites
Verified
Journal Article
Closed access
PDF file
MPMohd Bijarimi Mat Piah
Mohd Bijarimi Mat Piah
SASahrim Ahmad
Sahrim Ahmad
RRRozaidi Rasid
Rozaidi Rasid
This paper reports a melt blend of poly(lactic acid)/liquid natural rubber with Cloisite C30B (C30B). The mechanical, thermal and morphological properties of poly(lactic acid)/liquid natural rubber and nanocomposites were investigated. Results indicate that Young’s modulus and flexural modulus increased with the addition of C30B to the poly(lactic acid)/liquid natural rubber blend. The elongation at break of poly(lactic acid)/liquid natural rubber increased significantly as compared to nanocomposite with 1% of C30B, i.e. from 37.3% to 62.4%. Nevertheless, the elongation at break and impact strength decreased gradually when nanoclay content increased above 3%, suggesting the addition of clay changed the strain response in the blend systems. The incorporation of nanoclay in the poly(lactic acid)/liquid natural rubber blends lowered the glass transition temperature values relative to poly(lactic acid). This behavior may be associated with more free volume available in the nanocomposite blend systems compared with pure poly(lactic acid). Morphological analyses by scanning electron microscope and transmission electron microscope revealed that different types of morphologies exist for poly(lactic acid)/liquid natural rubber and nanocomposites. This study indicates that poly(lactic acid)/liquid natural rubber-toughened nanocomposites with a higher modulus and that thermal stability could be produced.

28 December 2016 in Polymer Bulletin
Verified
Journal Article
Closed access
PDF file
MPMohd Bijarimi Mat Piah
Mohd Bijarimi Mat Piah
SASahrim Ahmad
Sahrim Ahmad
AAA. K. M. Moshiul Alam
A. K. M. Moshiul Alam

28 August 2018 in Journal of Polymers and the Environment
Verified
Journal Article
Closed access
PDF file
JJJamiluddin Jaafar
Jamiluddin Jaafar
Januar Parlaungan SiregarJanuar Parlaungan Siregar
Januar Parlaungan Siregar
MPMohd Bijarimi Mat Piah
Mohd Bijarimi Mat Piah
TCTezara Cionita
Tezara Cionita
SASharmiza Adnan
Sharmiza Adnan
TRTeuku Rihayat
Teuku Rihayat