Recently, the number of electric vehicles (EVs) is increasing due to the decline of oil resources and the rising of greenhouse gas emissions. However, EVs have not received full acceptance by consumers due to the limitations of the stored energy and charging problems. The dynamic or in-motion charging solution has become a suitable choice to solve the battery-related issues. Many researchers and vehicle manufacturers are working to develop an efficient charging system for EVs. In order to improve the efficiency of the dynamic wireless power transfer (DWPT), the electromagnetic coupling coefficient between the two parts of the coupler must be maximized. This paper was dedicated to find the optimal topology of a magnetic coupler with the best coupling factor while taking in consideration the displacement and the misalignment of the EV. The article is introduced by developing a methodology for characterizing the electrical parameters of couplers, followed by a comparative study of different forms of coils suitable for dynamic charging of electric vehicles. The particularity of the proposed study concerned the overall dimensions, or the areas occupied by the windings of the coils remaining the same for all the chosen shapes and corresponding to the surface that is actually available under the EV. Simulation and experimental tests were carried out to validate the proposed study.
The current charging technology for electric vehicles consists of plugging the cable from the AC utility to charge the batteries. This requires heavy gauge cables to connect to electric vehicles, which can be difficult to handle, presents tripping hazards, and is prone to vandalism. In addition to these inconveniences, electric vehicles must be immobilized for hours before being fully charged. Dynamic wireless power transfer has been studied worldwide as a promising technology. It is safe and convenient and allows electric vehicles to charge while moving. To improve the efficiency of a dynamic wireless power transfer system, the magnetic coupling coefficient must be maximized between the primary pad, which is integrated into the road, and the secondary pad installed in the electric vehicle. This article presents a parametric optimization of the ferrite structure used for a 3 kW dynamic wireless power transfer prototype. Different ferrite configurations are compared while studying the effect of the parameter values on their magnetic coupling coefficient. Finally, the proposed structure was validated during the experimental test, and its coupling coefficient was improved by 26% compared to the original structure.
1 January 2021 in Progress In Electromagnetics Research
The dynamic or in motion charging is a solution that became a suitable choice to solve the electric vehicles (EV's) battery related issues. Many researchers and vehicle manufacturers are working to develop efficient charging system for EVs which are based on electromagnetic emissions to transfer power. Thus, these electromagnetic emissions must be reduced in order to avoid harmful effects on their environment (humans, pets, electronic devices …). The reduction is generally obtained by a shielding plate, however this shielding can impact the coupling between the primary and secondary coils. This paper treats a method for reducing the shielding effect on the coupling factor in wireless power transfer system application.
The present work aims at quantifying how the position of the receiver in a realistic dynamic wireless power transfer (DWPT) system affects the transmission process for electric vehicles. With the aim of considering the transmitted power, the position of the receiver is influenced by the factors that are the moving distance along the X axis, the misalignment along the Y axis, the vertical variation along the Z axis and the rotation angle along the Z axis. The analysis is based on the polynomial chaos expansions for a low computational cost and a fast sensitivity analysis.
About Me
Karim Kadem has been a researcher engineer at Vedecom since January 2020, and he received a Ph.D. in January 2020.
Karim Kadem has been a researcher engineer at Vedecom since January 2020, and he received a Ph.D. in January 2020.