The current charging technology for electric vehicles consists of plugging the cable from the AC utility to charge the batteries. This requires heavy gauge cables to connect to electric vehicles, which can be difficult to handle, presents tripping hazards, and is prone to vandalism. In addition to these inconveniences, electric vehicles must be immobilized for hours before being fully charged. Dynamic wireless power transfer has been studied worldwide as a promising technology. It is safe and convenient and allows electric vehicles to charge while moving. To improve the efficiency of a dynamic wireless power transfer system, the magnetic coupling coefficient must be maximized between the primary pad, which is integrated into the road, and the secondary pad installed in the electric vehicle. This article presents a parametric optimization of the ferrite structure used for a 3 kW dynamic wireless power transfer prototype. Different ferrite configurations are compared while studying the effect of the parameter values on their magnetic coupling coefficient. Finally, the proposed structure was validated during the experimental test, and its coupling coefficient was improved by 26% compared to the original structure.
The present work aims at comparing different coupling coils by taking into account sources of uncertainty for static inductive power-transfer (SIPT) systems. Due to the maximum transmission efficiency for the SIPT system related to the mutual inductance between coils, the key point here is to make use of a sparse polynomial chaos expansion (PCE) method to analyze the mutual inductance between the transmitter and the receiver. A fast postprocess-sensitivity analysis allowed the identification of which source of uncertainty was the most influential factor to the mutual inductance for different coupling coils. Furthermore, in view of the relationship between the maximum transmission efficiency and the ratio of the length of wires of a coil and the mutual inductance, circular coupling coils should be recommended for SIPT systems.
The shielding design is one of the most difficult phases in developing an inductive power transfer system (IPT) for electric vehicles. In this aspect, the combination of metamodeling with a multiobjective optimization algorithm provides an efficient approach. Here, Polynomial Chaos Expansions (PCE) and Multigene Genetic Programming Algorithm (MGPA) methods are used and compared to describe the mutual inductance of the IPT system in the function of the design variables on the shielding. These metamodels are obtained based on a number of 3D Finite Element Method (FEM) computations. Then, a multiobjective optimization algorithm coupled with the PCE metamodeling technique is applied to determine the optimal design variables for a practical shielding design when considering the magnetic coupling as well as the cost of the shielding as objective functions. Such a multiobjective optimization algorithm based on a particle swarm algorithm coupled with a metamodel on PCE method is proposed, leading to improve around 104 % of the mutual inductance M and save 14 % of the cost C for the shielding compared to the initial design.
15 September 2023 in IEEE Transactions on Electromagnetic Compatibility
This article demonstrates the interest of topology optimization in designing the ferrite plate used in an inductive power transfer system for electric vehicles. The solid isotropic material with the penalization (SIMP) method is used to optimize the ferrite plate, and it modifies the topology of the ferrite shape iteratively. This SIMP method can lead to novel structures compared with usual existing shapes. In this article, it is found that a part of the ferrite from the center and the edges of the predefined ferrite plate can be removed to save the ferrite volume while achieving a minimal reduction of transmission efficiency. Moreover, the results from topology optimization are influenced by the aluminum shielding plate near the ferrite plate. Hence, the ferrite on the receiver side has to be larger than the one on the transmitter side. These results give some design guidelines on arranging the ferrite placement for the system, and the approach could be generalized for shielding sheets/walls.
The paper addresses the uncertainty quantification of physical and geometrical material parameters in the design of wireless power transfer systems. For 3D complex systems, a standard Monte Carlo cannot be directly used to extract statistical quantities. So, surrogate models based on Kriging or polynomial chaos expansions are built to study the impact of variable parameters on the radiated magnetic field and efficiency. Such fast prediction of uncertainties in the parameters of the system can improve the design of inductive power transfer systems taking into account human exposure recommendations and variability of the parameters.
The present work aims at quantifying how the position of the receiver in a realistic dynamic wireless power transfer (DWPT) system affects the transmission process for electric vehicles. With the aim of considering the transmitted power, the position of the receiver is influenced by the factors that are the moving distance along the X axis, the misalignment along the Y axis, the vertical variation along the Z axis and the rotation angle along the Z axis. The analysis is based on the polynomial chaos expansions for a low computational cost and a fast sensitivity analysis.
About Me
Yao PEI has been a postdoctoral researcher in CentraleSupelec since March 2023, and she received a Ph.D. in December 2022.
Yao PEI has been a postdoctoral researcher in CentraleSupelec since March 2023, and she received a Ph.D. in December 2022.