Wastewater from tanneries may ruin agricultural fields by polluting them with trace metals. The synthesis of nanoparticles (NPs) from algal sources and their application could help in decreasing hazardous materials, for environmental safety. The potential of zinc oxide nanoparticles made from Oedogonium sp. was evaluated for removal of heavy metals from leather industrial wastewater. Synthesized algal nanoparticles (0 (control), 0.1, 0.5, and 1 mg) were applied to treat wastewater by using different concentrations of leather industrial effluents (0%, 5%, 10%, 15%, and 100%) for 15, 30, and 45 d. The wastewater collected was dark brown to black in color with very high pH (8.21), EC (23.08 μs/cm), and TDS, (11.54 mg/L), while the chloride content was 6750 mg/L. The values of biological oxygen demand (BOD) and chemical oxygen demand (COD) ranged between 420 mg/L and 1123 mg/L in the current study. Prior to the application of nanoparticles, Cr (310.1), Cd (210.5), and Pb (75.5 mg/L) contents were higher in the leather effluents. The removal efficiency of TDS, chlorides, Cr, Cd, and Pb was improved by 46.5%, 43.5%, 54%, 57.6%, and 59.3%, respectively, following treatment with 1 mg of nanoparticles after 45 d. Our results suggested that the green synthesis of ZnO nanoparticles is a useful and ecofriendly biotechnological tool for treating tannery effluents, before they are discharged into water bodies, thus making the soil environment clean.

Nanofiltration membranes were successfully created using multi-walled carbon nanotubes (MWCNTs) and MWCNTs modified with amine (MWCNT-NH₂) and carboxylic groups (MWCNT-COOH). Chitosan (CHIT) and chitosan–glutaraldehyde (CHIT-G) were utilized as dispersants. Sonication, SEM, and contact angle were used to characterize the as-prepared membranes. The results revealed that the type of multi-walled carbon nanotubes (MWCNT, MWCNT-COOH and MWCNT-NH₂) used as the top layer had a significant impact on membrane characteristics. The lowest contact angle was 38.6 ± 8.5 for the chitosan-G/MWCNT-COOH membrane. The surface morphology of membranes changed when carbon with carboxylic or amine groups was introduced. In addition, water permeability was greater for CHIT-G/MWCNT-COOH and CHIT-G/MWCNT-NH₂ membranes. The CHIT-G/MWCNT-COOH membrane had the highest water permeability (5.64 ± 0.27 L m⁻² h⁻¹ bar⁻¹). The findings also revealed that for all membranes, the rejection of inorganic salts was in the order R_(NaCl) > R_(MgSO4).

This article focuses on the toxic element chromium (Cr) in wastewater, its incorporation into soil plant systems, and its relevant toxicity in the food chain as assessed by a health risk assessment from dietary intake. The Nili Ravi buffalo is an important cattle inhabiting Sargodha, Punjab, Pakistan, and forage crops grown on soils contaminated with Cr might cause toxicity in the food chain by local inhabitants eating meat. The soil, forage and animal blood samples were collected from five different locations in Tehsil Sahiwal (Chak Dhool, Bagabalocha, Chandia, Dhool Bala and Kakrani) twice at six-month intervals. A total of 30 samples from each ecological zone were collected from the soil and forage crops (Zea mays, Sorghum bicolor, Trifolium alexandrinum). The samples from zone-V and zone-IV showed the maximum concentration of Cr because these areas receive highly contaminated water for irrigation. The Cr was greater than the permissible limits. Environmental indices for all samples ranged below 1. The bioaccumulation and pollution load of Cr in soil and forage crops due to wastewater irrigation can contaminate the whole food chain via the soil, forages and animals. The health risk index (HRI) and a high value of enrichment factor were found for Cr in some sites. The Cr concentration was higher during the summer season than winter. Fodder crops with different concentrations and an elevated level of Cr were observed in maize. Attention should be paid when wastewater is used for fodder crop irrigation and its potential risks to human health following dairy product (milk, meat) entry into the food chain.

Amidst the ongoing advancements in membrane technology, a leading method has come to the forefront. Recent research has emphasized the substantial influence of surface attributes in augmenting the effectiveness of thin-film membranes in water treatments. These studies reveal how surface properties play a crucial role in optimizing the performance of these membranes, further establishing their prominence in the field of membrane technology. This recognition stems from the precise engineering of surfaces, ensuring they meet the demanding requirements of advanced separation processes. This study utilizes polyamide as a discerning layer, applied atop a polysulfone support sheet through interfacial polymerization (IP) for membrane fabrication. The amounts in the various membranes were created to vary. The membrane’s permeability to water with significant salt rejection was enhanced, which improved its effectiveness. The polyamide (PA) membrane comprising graphene oxide (rGO, 0.015%) had a water permeability of 48.90 L/m² h at 22 bar, which was much higher than the mean permeability of polyamide membranes (25.0 L/m² h at 22 bar). On the other hand, the PA–rGO/CHIT membranes exhibited the lowest water permeability due to their decreased surface roughness. However, the membranes’ effectiveness in rejecting salts ranged from 80% to 95% for PA–rGO and PA–rGO/CHIT membranes.

This manuscript elucidates the thermal stability analysis of four distinct penicillinate complexes, comprising yttrium(III), germanium(IV), tungsten(VI), and silicon, over a temperature ranging from 25 to 800°C. Thermal data revealed the high thermal stability nature of the decomposition steps. According to the spectroscopic measurements, the chemical formula of penicillinate complexes were [Y(Pin)2].Cl.6H2O complex (1), [Ge(Pin)2].2Cl.2H2O complex (2), [W(Pin)2].4Cl complex (3), and [Si(Pin)2].2Cl.2H2O complex (4). The powder XRD pattern revealed crystalline to polycrystalline natures. The synthesized penicillinate complexes were subjected to theoretical calculations utilizing density functional theory (DFT) calculations, employing the lanL2DZ/6-311G++ level of theory. The optimized geometry of each penicillinate complex was discerned, and a comprehensive evaluation of various properties, including the HOMO→LUMO electronic energy gap, molecular electrostatic potential map, and additional physical parameters, was conducted and validated against experimental findings. Molecular docking tool was used to explore the anticancer activity of the synthesized penicillinate complexes in comparison with penicillin potassium drug (Pin). For the computational investigation, two kinases — CSF1R (PDB ID: 7MFC) and MEK2 (PDB ID: 1S9I) associated with breast cancer progression and estrogen-dependent breast cancer were utilized. This comprehensive analysis provides a deeper understanding of the synthesized penicillinate complexes and their potential applications. KEY WORDS: Penicillinate complexes, TGA-DrTGA, TEM, XRD, DFT/TD-DFT, Molecular docking Bull. Chem. Soc. Ethiop. 2024, 38(4), 973-988. DOI: https://dx.doi.org/10.4314/bcse.v38i4.13