An evaluation of monostatic radar cross section (RCS) response in the near-field range was performed for several targets with different and complex topologies. The main objective was to provide and validate an efficient tool based on electromagnetic (EM) simulations to characterize a traffic scenario. Thus, a novel method based on the combination of geometrical theory of diffraction (GTD) and physical optics (PO) was used to estimate RCS, and the results were compared with the method of moments (MoM) methodology. The simulations were experimentally validated using a commercial vehicular frequency-modulated continuous wave (FMCW) radar at 24 GHz. With this simple measurement system, RCS measurements can be made using an easier and cheaper process to obtain RCS response in the near-field range, which is the most usual situation for traffic applications. A reasonable agreement between the measurements and the EM simulations was observed, validating the proposed methodology in order to efficiently characterize the RCS of targets typically found in real traffic scenarios.
1 January 2011 in Progress In Electromagnetics Research B
A new tool for the analysis and design of radomes using multicore processors is presented. The radomes can be defined by multilayer structures with embedded Frequency Selective Surfaces (FSS). Radome with metallic layers with arbitrarily shaped can be also analyzed. Four different approaches can be used for the analyses of the radomes: Iterative Physical Optics-Moment Method, (IPO-MoM); approach, iterative MoM (antenna)-MoM (radome), (MoM-MoM); full MoM approach using the thin layer approach, (MoM-TL); and full MoM with a full volumetric approach (MoM-VOL). The two full MoM approaches provide accurate and fast simulations of the radome behavior. Optimization features for the radome design are also included by imposing a mask in a bandwidth for the reflection or transmission coefficients. The tool has been cross validated using results obtained with a well checked 3D MoM code.
21 February 2013 in International Journal of Antennas and Propagation
This paper presents a complete assessment to the interferences caused in the nearby radio systems by wind turbines. Three different parameters have been considered: the scattered field of a wind turbine, its radar cross-section (RCS), and the Doppler shift generated by the rotating movements of the blades. These predictions are very useful for the study of the influence of wind farms in radio systems. To achieve this, both high-frequency techniques, such as Geometrical Theory of Diffraction/Uniform Theory of Diffraction (GTD/UTD) and Physical Optics (PO), and rigorous techniques, like Method of Moments (MoM), have been used. In the analysis of the scattered field, conductor and dielectric models of the wind turbine have been analyzed. In this way, realistic results can be obtained. For all cases under analysis, the wind turbine has been modeled with NURBS (Non-Uniform Rational B-Spline) surfaces since they allow the real shape of the object to be accurately replicated with very little information.