The concept of generating two spaced beams in dual-CP by variable rotation technique (VRT) is validated for the first time by manufacturing and measuring. A reflectarray demonstrator has been designed, manufactured, and tested to deviate ±10° the beam of a dual-CP multiflared horn at 19.7 GHz. The proposed reflectarray cell for VRT is made of a conductive cross printed on a grounded dielectric. The experimental results show that two adjacent beams in dual-CP maintain the correct directions in the prescribed frequency band (19.2-20.2 GHz). The results are satisfactory and validate the concept for generating two spaced beams in orthogonal CP by VRT with a single feed.
An evaluation of monostatic radar cross section (RCS) response in the near-field range was performed for several targets with different and complex topologies. The main objective was to provide and validate an efficient tool based on electromagnetic (EM) simulations to characterize a traffic scenario. Thus, a novel method based on the combination of geometrical theory of diffraction (GTD) and physical optics (PO) was used to estimate RCS, and the results were compared with the method of moments (MoM) methodology. The simulations were experimentally validated using a commercial vehicular frequency-modulated continuous wave (FMCW) radar at 24 GHz. With this simple measurement system, RCS measurements can be made using an easier and cheaper process to obtain RCS response in the near-field range, which is the most usual situation for traffic applications. A reasonable agreement between the measurements and the EM simulations was observed, validating the proposed methodology in order to efficiently characterize the RCS of targets typically found in real traffic scenarios.
A refinement for the computation of the rigorous part of the multi-level fast multipole method (MLFMM) of analyzing volumetric objects is presented. A scheme based on the fast Fourier technique (FFT) is proposed with the objective of reducing the computational resources required to accurately analyze large homogeneous and non-homogeneous dielectric volumes. In order to reduce the memory requirements, the storage of the near-field terms of the method of moments (MoM) matrix is performed only for the positions corresponding to a parallelepiped with the size of the level 1 block of the MLFMM, computed with the vacuum permittivity, taking advantage of the Toeplitz symmetry present in regular hexahedral meshes. The FFT avoids applying the near-field MoM matrix in the iterative solution process. The application of this approach results in huge improvements in terms of memory usage, but also a speeds up the iterative solution process because the use of three-dimensional (3D) FFTs is very efficient for computing convolutions when the number of unknowns of the problems becomes very large as happens in volumetric problems. We also propose a new approach for the numerical treatment of the transition of the dielectric permittivity between different dielectrics or between a dielectric and a free space. To validate the computation technique, the radar cross section (RCS) of several dielectric bodies is computed using the classical MLFMM approach and it is compared with the presented FFT-based-MLFMM solution. The results demonstrate that the efficient memory and computation time usage of the proposed approach.
The analysis of collision avoidance systems in real traffic urban scenarios represent a challenge for computational electromanetics due to its multiscale nature. An approach for solving this problem based on a combination of Multi-Level Fast Multipole Method (MLFMM), Characteristic Basis Functions (CBF), Physical Optics (PO) and Geometrical Theory of Diffraction (GTD) is described. Results for several cases are shown.
BICGSTAB-FFT method of moment (MM) scheme is proposed to analyze several levels of planar generic layouts embedded in large multilayer structures when the layout geometries are modeled by NURBS surfaces. In this scheme, efficient computation of normalized error defined in iterative bi-conjugate gradient stabilized (BICGSTAB) method for large multilayer structure analysis problems is implemented. The efficient computation is based on pulse expansion with dense equi-spaced mesh of generalized rooftop basis functions (BFs) defined on NURBS surfaces and equivalent periodic problem (EPP) in order to apply fast Fourier transforms (FFT). Moreover, efficient computation of Green’s functions for multilayer structure is implemented for near and far field regions. Experimental and numerical validations of whole printed reflect array antennas of electrical size between 8 and 16 times the vacuum wavelengths are shown. In these validations, CPU time consumptions of the proposed method are obtained with results between few minutes and half an hour using a conventional laptop.
10 March 2025 in IEEE Open Journal of Antennas and Propagation
A new ray-tracing acceleration technique is presented for electromagnetic simulation problems using the Uniform Theory of Diffraction and meshes of planar facets. The innovation involves using relational databases to accurately store spatial information, enabling spatial indexing through space partitioning with R-trees. This technique effectively reduces the computational cost of several critical phases, including the shadowing test. Additionally, there are multiple advantages to utilizing this technology, such as automated memory and disk management along with a query planner that organizes the instructions automatically. Direct rays, multiple reflections, multiple transmissions, simple diffraction, and combinations of these effects have been implemented in PostgreSQL and its spatial library PostGIS. Compared to traditional techniques that employ Angular Z-Buffer acceleration and store information solely in RAM using a low-level language, this approach decreases memory usage by more than 90% in complex scenarios. It also shows a decrease in execution time by more than half when the scenario is sufficiently complex.