Manuel Felipe Cátedra Pérez

Prof. Dr. Manuel Felipe Cátedra Pérez

Department of Computer Science, University of Alcalá, Plaza de San Diego, s/n, 28801 Alcalá de Henares, Madrid, Spain

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 April 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
EGEliseo Garcia Garcia
Eliseo Garcia Garcia
Carlos DelgadoCarlos Delgado
Carlos Delgado
MPManuel Felipe Cátedra Pérez
Manuel Felipe Cátedra Pérez
We present a new approach for the analysis and design of radome structures. It makes use of extended domain macro-basis functions obtained from the characteristic basis function method in order to represent the current distribution over the radome. This involves computational advantages due to the reduction in the number of unknowns compared to conventional approaches. This approach involves dividing the scenario into two domains, antenna and radome, and calculating the influence between them using a technique that iteratively corrects the error of the currents on each domain. This technique can be used to analyze arbitrary-shaped radome antennas including several material layers with different thicknesses and dielectric properties that can embed frequency selective surfaces on any interface. Several test cases are presented for the validation of the proposed technique.

1 September 2017 in Journal of Computational Physics
Verified
Journal Article
Closed access
MAMaría-Jesús Algar
María-Jesús Algar
Lorena Lozano PlataLorena Lozano Plata
Lorena Lozano Plata
JMJavier Moreno
Javier Moreno
Iván GonzálezIván González
Iván González
MPManuel Felipe Cátedra Pérez
Manuel Felipe Cátedra Pérez

22 February 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
EGEliseo Garcia Garcia
Eliseo Garcia Garcia
Carlos DelgadoCarlos Delgado
Carlos Delgado
MPManuel Felipe Cátedra Pérez
Manuel Felipe Cátedra Pérez
A technique for the reduction of the CPU time in the solution of scattering problems using the characteristic basis function method (CBFM) is presented. It is suitable to analyze electrically very large cases in which an iterative solution process cannot be avoided, even considering the reduction in the size of the matrix achieved by the CBFM. This technique is based on the definition of a new set of high-level functions that improves the convergence properties of the problem under analysis. The test cases show that the approach provides accurate results for canonical and complex bodies.

11 November 2020 in Electronics
Verified
Journal Article
Open access
PDF file
PSPablo Sanchez-Olivares
Pablo Sanchez-Olivares
Lorena Lozano PlataLorena Lozano Plata
Lorena Lozano Plata
ASAlvaro Somolinos
Alvaro Somolinos
MPManuel Felipe Cátedra Pérez
Manuel Felipe Cátedra Pérez
An evaluation of monostatic radar cross section (RCS) response in the near-field range was performed for several targets with different and complex topologies. The main objective was to provide and validate an efficient tool based on electromagnetic (EM) simulations to characterize a traffic scenario. Thus, a novel method based on the combination of geometrical theory of diffraction (GTD) and physical optics (PO) was used to estimate RCS, and the results were compared with the method of moments (MoM) methodology. The simulations were experimentally validated using a commercial vehicular frequency-modulated continuous wave (FMCW) radar at 24 GHz. With this simple measurement system, RCS measurements can be made using an easier and cheaper process to obtain RCS response in the near-field range, which is the most usual situation for traffic applications. A reasonable agreement between the measurements and the EM simulations was observed, validating the proposed methodology in order to efficiently characterize the RCS of targets typically found in real traffic scenarios.

28 June 2021 in Electronics
Verified
Journal Article
Open access
PDF file
AAAlejandro Pons Abenza
Alejandro Pons Abenza
ASAlvaro Somolinos
Alvaro Somolinos
Iván GonzálezIván González
Iván González
MPManuel Felipe Cátedra Pérez
Manuel Felipe Cátedra Pérez
A refinement for the computation of the rigorous part of the multi-level fast multipole method (MLFMM) of analyzing volumetric objects is presented. A scheme based on the fast Fourier technique (FFT) is proposed with the objective of reducing the computational resources required to accurately analyze large homogeneous and non-homogeneous dielectric volumes. In order to reduce the memory requirements, the storage of the near-field terms of the method of moments (MoM) matrix is performed only for the positions corresponding to a parallelepiped with the size of the level 1 block of the MLFMM, computed with the vacuum permittivity, taking advantage of the Toeplitz symmetry present in regular hexahedral meshes. The FFT avoids applying the near-field MoM matrix in the iterative solution process. The application of this approach results in huge improvements in terms of memory usage, but also a speeds up the iterative solution process because the use of three-dimensional (3D) FFTs is very efficient for computing convolutions when the number of unknowns of the problems becomes very large as happens in volumetric problems. We also propose a new approach for the numerical treatment of the transition of the dielectric permittivity between different dielectrics or between a dielectric and a free space. To validate the computation technique, the radar cross section (RCS) of several dielectric bodies is computed using the classical MLFMM approach and it is compared with the presented FFT-based-MLFMM solution. The results demonstrate that the efficient memory and computation time usage of the proposed approach.

3 December 2014 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
PDF file
Abdelhamid TayebiAbdelhamid Tayebi
Abdelhamid Tayebi
JGJosé Gómez-Pulido
José Gómez-Pulido
JAJose Ramon Almagro
Jose Ramon Almagro
Iván GonzálezIván González
Iván González
MPManuel Felipe Cátedra Pérez
Manuel Felipe Cátedra Pérez
This work deals with the design, analysis, and measurement of a novel multibeam reflector feed at X band. The whole system is composed of a five-horn array and two layers of electromagnetic bandgap (EBG) material. The goal of this antenna is to obtain high gain over a wide bandwidth, while maintaining a compact size. An efficient optimization process was carried out to find the optimum dimensions of the feed antenna. The final design was built and measured. High illumination performance was achieved. The feed antenna provided 5.5% of 3 dB gain bandwidth and 3.1% of 1.5 dB gain bandwidth, which is higher compared to designs previously reported in the literature.