Previous studies on accuracy of three-dimensional (3D) printed model focused on full arch measurements at few points. The aim of this study was to examine the dimensional accuracy of 3D-printed models which were teeth-prepped for three-unit fixed prostheses, especially at margin and proximal contact areas. The prepped dental model was scanned with a desktop scanner. Using this reference file, test models were fabricated by digital light processing (DLP), Multi-Jet printing (MJP), and stereo-lithography apparatus (SLA) techniques. We calculated the accuracy (trueness and precision) of 3D-printed models on 3D planes, and deviations of each measured points at buccolingual and mesiodistal planes. We also analyzed the surface roughness of resin printed models. For overall 3D analysis, MJP showed significantly higher accuracy (trueness) than DLP and SLA techniques; however, there was not any statistically significant difference on precision. For deviations on margins of molar tooth and distance to proximal contact, MJP showed significantly accurate results; however, for a premolar tooth, there was no significant difference between the groups. 3D color maps of printed models showed contraction buccolingually, and surface roughness of the models fabricated by MJP technique was observed as the lowest. The accuracy of the 3D-printed resin models by DLP, MJP, and SLA techniques showed a clinically acceptable range to use as a working model for manufacturing dental prostheses

The studies on implant-crown-retained removable partial dentures (IC-RPDs) for edentulism are scarce. The purpose of this study was to evaluate survival rates and marginal bone loss (MBL) of IC-RPDs compared to implant overdentures (IODs) in mandibular edentulism. Variables that influenced survival and marginal bone loss (MBL) of implants in both treatment modalities were analyzed and the functional/esthetic satisfaction of patients as well as prosthetic complications were also observed. Eighteen IC-RPDs with a total of 60 implant-supported survey crowns and 24 IODs with a total 94 implants retained with magnet attachments were observed. After a median observation period of 46.6 months (up to 149 months), we observed 98.3% implant survival rates for IC-RPDs and 92.5% for IODs. Kaplan–Meier survival curves based on the treatment modality showed that, at 96 months, cumulative survival rates were 98.3% in IC-RPD and 83.1% in IOD. For implant survival rates, no statistical differences were observed according to age, sex, opposing dentition, or implant positions (p = 0.515, 0.666, 0.201, 0.749, respectively). The implant MBL measurements for IC-RPD and IOD groups at the final recall check were 0.93 ± 1.22 mm and 2.12 ± 2.09 mm, respectively. Additionally, there were no significant differences between groups (p = 0.554). The implants with peri-implantitis at year 1 showed significantly higher MBL at final check-up (p < 0.001). The MBL of implants showed significant differences based on age (p = 0.008) and opposing dentition (p = 0.003). No significant differences of implant MBL were observed for the position of placed implants (p = 0.621) or sex (p = 0.666). Patient-reported outcome measures (PROMs) on functional and esthetic satisfaction were significantly improved after IC-RPD or IOD treatment (p < 0.001). The most frequent prosthetic complication of IC-RPD was clasp loosening, while for IOD group, it was attachment dislodgement. Within the limitations of this retrospective study, we concluded that IC-RPDs could be considered as a viable treatment option for edentulous patients who need few fixed abutments for satisfaction.

Bonding agents have been developed to improve bond strength between ceramic and Co-Cr metal. The aim of this study was to investigate the influence of two bonding agents on bond strength of Co-Cr metal fabricated by selective laser melting (SLM). Bond strength was determined by a three-point bending test, and the interfaces of the metal and ceramic, before and after the bending test, were observed by optical microscopy and scanning electron microscopy (SEM) to determine the thickness of the oxide layer and amount of ceramic remaining. To analyze the elemental composition of the bonding agents and fractured surfaces, energy dispersive X-ray spectroscopy (EDS) was used. Co-Cr specimens with bonding agent showed significantly higher bond strength than Co-Cr specimens without bonding agents. The fractured surfaces of most specimens showed mixed failure, but failure mode varied according to bonding agent and fabrication type. Specimens from groups treated with bonding agents had significantly higher remaining ceramic fractions on fractured Co-Cr alloys than specimens from groups that did not receive bonding agent. Mass amounts of silicone (Si) and titanium (Ti) on the fractured alloy surfaces were also different among specimens according to method of fabrication and presence of bonding agent. Together, the results suggest that application of bonding agent to 3D printed Co-Cr metal increases bond strength with ceramics.

There have been no studies of implant-crown-retained removable partial dentures (IC-RPD) for the treatment of maxillary edentulism. The purpose of this study was to perform clinical and radiographic evaluations of implants in IC-RPD compared to implant overdentures (IOD) in maxillary edentulous patients. Twenty IC-RPDs with 74 splinted implant crowns and 18 IODs with 71 implants retained with magnet attachments were observed in 38 patients. We statistically analyzed survival rates and marginal bone loss (MBL) of implants based on multiple variables including first year pathologic condition, location of placed implant, age, and sex in both treatments. Patient reported oral measurements (PROMs) regarding functional/esthetic improvement after IC-RPD or IOD treatments and prosthetic complications were also statistically analyzed. After a median observation period of 47.1 months (up to 147 months), we observed 97.3% implant survival rates for IC-RPD and 70.4% for IOD (p < 0.001). Among variables, first year pathologic condition (p < 0.001) and sex (p = 0.027) influenced implant survival rates. The MBL of implants for IC-RPD and IOD groups at the final check-up were 1.12 ± 1.19 mm and 3.31 ± 1.71 mm, respectively (p < 0.001). In both groups, patients with peri-implantitis (p < 0.001) and patients older than 65 years (p = 0.029) showed significantly higher implant MBL regardless of treatment modality. Functional and esthetic satisfaction were significantly improved (p < 0.001) after both treatments. The IOD group showed more frequent prosthetic complications compared to the IC-RPD group. Within the limitations of a retrospective study, we concluded that RPD with few splinted implant crowns is a feasible alternative treatment modality for maxillary edentulous patients with anatomical limitations.

Kim SY, et al. J Adv Prosthodont. 2024 Aug;16(4):255-266. https://doi.org/10.4047/jap.2024.16.4.255

Yoo SY, et al. J Adv Prosthodont. 2022 Apr;14(2):108-121. https://doi.org/10.4047/jap.2022.14.2.108