This article presents the results of the study of the influence of the most significant parameters of the side wall roughness of an ultra-thin silicon nitride lightguide layer of multimode integrated optical waveguides with widths of 3 and 8 microns. The choice of the waveguide width was made due to the need to provide multimode operation for telecommunication wavelengths, which is necessary to ensure high integration density. Scattering in waveguide structures was measured by optical frequency domain reflectometry (OFDR) of a backscattering reflectometer. The finite difference time domain method (FDTD) was used to study the effect of roughness parameters on optical losses in fabricated waveguides, the roughness parameters that most strongly affect optical scattering were determined, and methods of its significant reduction were specified. The prospects for implementing such structures on a quartz substrate are justified.
Pseudo-capacitors with electrodes based on polyaniline and vertically aligned multiwalled carbon nanotubes (PANI/VA-MWCNT) composite are studied. Fractional differential models of supercapacitors are briefly discussed. The appropriate fractional circuit model for PANI/MWCNT pseudo-capacitors is found to be a linearized version of the recently proposed phase-field diffusion model based on the fractional Cahn–Hilliard equation. The temperature dependencies of the model parameters are determined by means of impedance spectroscopy. The fractional-order is weakly sensitive to temperature, and the fractional dynamic behavior is related to the pore morphology rather than to thermally activated ion-hopping in PANI/MWCNT composite.
This article presents a silicon disk resonator of the whispering-gallery-mode (WGM) type. The calculated Q-factor of the silicon WGM resonator was 107. Two methods of studying the surface roughness of a silicon WGM resonator with a nonlinear profile by means of Helios 650 scanning electron microscope and Bruker atomic force microscope (AFM) are presented. The results obtained by the two methods agreed well with each other. A comparison of the surface roughness values of WGM resonators manufactured using different technological approaches is presented. Based on the obtained data, a preliminary estimated Q-factor calculation of the resonators was performed, which was refined by numerical calculation using the finite-difference time-domain (FDTD) method. The effect of the surface roughness of the resonator on its Q-factor was found. Reducing the surface roughness of the resonator from 30 nm to 1–2 nm led to an increase in its Q-factor from 104 to 107.
This study focuses on the impact of plasma-enhanced chemical vapor deposition (PECVD) synthesis parameters on the characteristics of a synthesized vertical array of multi-walled carbon nanotubes (VMWCNT). Catalytic synthesis is carried out on a thin nickel film on a silicon substrate after breakup of the Ni film into nanoparticles during pretreatments–oxidation and reduction. The influence of growth temperature, synthesis duration, plasma parameters, working pressure, and precursor concentration on the morphology and geometry of VMWCNT is investigated. A detailed combination of scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) is used to analyze the evolution of geometry, defect density, and nitrogen doping of carbon nanotubes (CNT) with varying synthesis temperatures. The work includes recommendations for adapting PECVD synthesis to achieve predictable and reproducible growth of VMWCNT with optimal properties for specific technological applications.
Phase-change materials of the Ge–Sb–Te (GST) system are promising for non-volatile memory and programmable photonics owing to their reversible amorphous–crystalline transitions. Among these materials, GeSb4Te7 stands out for its optimal balance of thermal stability, switching speed, and energy efficiency. The properties of GST materials are critically dependent on structural defects, particularly germanium vacancies that occur during synthesis and operation. Using density functional theory, we demonstrate that Ge vacancies and Ge–Sb intermixing significantly influence the electronic and optical properties of GeSb4Te7. Positive binding energies reveal vacancy clustering tendencies, which systematically reduce p-type degeneracy and widen the band gap (from 0.47 to 0.67 eV at a 2.7% vacancy concentration). Consequently, the metallic optical response in the visible range diminishes, as reflected in the less negative real dielectric function. Furthermore, we extend our investigation to the fundamental building block of this material system, the GeSb2Te4 monolayer. By studying controlled interlayer displacements of Ge and Te atoms in an otherwise stoichiometric slab, we elucidate the switching mechanism in the two-dimensional limit. The pristine monolayer exhibits semiconducting behavior with an indirect band gap of 0.74 eV, while layer sliding induces a semiconductor-to-metal transition accompanied by pronounced changes in the optical absorption spectrum. The asymmetric energy barrier (1.69 eV forward, 0.60 eV reverse) suggests favorable reversible switching via structural distortions alone, without requiring chemical modifications. The obtained results, spanning from defective bulk crystals to structurally distorted monolayers, are important for the targeted optimization of GST material properties in memory devices, optical elements, and emerging nanoscale phase-change applications.