Nylon 6/Chitosan membranes were fabricated by electrospinning onto a Millipore glass fiber filter to produce nanofibrous filter. Scanning electron microscopy (SEM) and water contact angle (WCA) were done to characterize the produced filter. Filter removal capability (adsorption) for metal ions was investigated for lead nitrate (Pb(NO3)2) and sodium chloride (NaCl). The antibacterial effect of the Nylon 6/Chitosan was investigated for Escherichia coli. Removal optimum values for Pb(NO3)2 and NaCl reached 87% and 75%, respectively. This research demonstrated that Nylon 6/Chitosan nanofibrous membrane has an enormous applicable potential removal for metal ions from aqueous solutions, antibacterial activity reaching 96%, and reasonable inhibition zone against Escherichia coli (E. coli).
1 January 2018 in International Journal of Hydrogen Energy
Nylon 6/with (0, 0.1, 0.2, 0.4, 0.6 and 0.8) wt. % MWCNTs films conductive polymers were prepared by electrospinning technique. Prepared films morphology test by SEM and the average fibers diameters measure statically was 140 nm for (nylon/0.4 wt. % MWCNTs film). The nanofibers films show enhancing the electrical conductivity by increase MWCNTs concentration, from (2.9 × 10−9 S/cm) for pure nylon film to (1.042 × 10−6 S/cm) for 0.8 wt. % MWCNT. The activation energy decreased with increasing the MWCNTs concentration, the activation energy was (0.068, 0.057, 0.0536, 0.0523, and 0.045 and 0.077) eV for (pure nylon, nylon/0.1, 0.2, 0.4, 0.6, 0.8% wt. % MWCNTs) films. The calculated result of 0.077 eV is even higher than the activation energy of the pure film which is 0.068 eV, this is may be due to changing the state of MWCNTs dispersion in the host polymer (nylon 6) as concentration of MWCNTs increased