Emad Al-Hassani

Prof. Emad Al-Hassani


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2017 in Energy Procedia
Verified
Journal Article
Open access
AJAkram Jabur
Akram Jabur
EAEmad Al-Hassani
Emad Al-Hassani
Ahmed Majeed Al-ShammariAhmed Majeed Al-Shammari
Ahmed Majeed Al-Shammari
MNManar A. Najim
Manar A. Najim
AHAymen A. Hassan
Aymen A. Hassan
AAAesar A. Ahmed
Aesar A. Ahmed

3 March 2023 in International Journal of Biomaterials
Verified
Journal Article
Open access
PDF file
AAAmjed Al-Khateeb
Amjed Al-Khateeb
EAEmad Al-Hassani
Emad Al-Hassani
AJAkram Jabur
Akram Jabur
There is a critical need in orthopedic and orthodontic clinics for enhanced implant-bone interface contact to facilitate the quick establishment of a strong and durable connection. Surface modification by bioactive multifunctional materials is a possible way to overcome the poor osteoconductivity and the potential infection of Ti-based implants. Ti-25Zr biometallic alloy was prepared by powder metallurgy technique and then coated by Nano-composite fiber using electrospinning. Ceramic Nanocompound (CaTiO3, BaTiO3) was used as filler material and individually added to polymeric matrices constructed from the blend of polycaprolactone/chitosan. Using optical microscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), and wettability, respectively, the morphology, chemical analysis, surface roughness, and contact angle measurements of the samples were evaluated. The result shows a significant improvement in cell viability, proliferation, and ALP activity for coated samples compared to noncoated samples. PCL/Chitosan/Nano-CaTiO3 (CA1) recorded remarkable enhancement from the surface-coated samples, demonstrating a significantly higher cell viability value after seven days of MC3T3-E1 cell culture, reaching 271.56±13.15, and better cell differentiation with ALP activity reaching 5.61±0.35 fold change for the same culture time. PCL/Chitosan/Nano-BaTiO3 (BA1) also shows significant improvement in cell viability by 181.63±17.87 and has ALP activity of 3.97±0.67 fold change. For coated samples, cell proliferation likewise exhibits a considerable temporal increase; the improvement reaches 237.53 for (CA1) and 125.16 for (BA1) in comparison with uncoated samples (bare Ti-25Zr). The coated samples resist bacteria in the antibacterial test compared to the noncoated samples with no inhibition zone. This behavior suggests that a Nanocomposite fiber coat containing an active ceramic Nanocompound (CaTiO3, BaTiO3) promotes cell growth and holds promise for orthodontic and orthopedic bioapplication.

1 June 2017 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
EAEmad Al-Hassani
Emad Al-Hassani
AAA.H. Ali
A.H. Ali
SHS.T. Hatem
S.T. Hatem
Copper based shape memory materials was interesting group of metal alloys that have a widespread potential in medical and industrial application due to their characteristics ,the possibility of exhibiting shape memory behavior and lower cost. In this research the alloy (Cu-(15-40) wt%Zn-6wt.%Al) has been prepared by powder metallurgy technique Zn element (15, 20, 25, 30, 35, 40 wt%Zn) and fixed percentage of Al content which is 6.wt%Al then aluminum replaced by (Si, Sn, Ni )element at fixed percentage of 6wt.%, in order to study the effect of these elements on SMA. After samples preparation examination were done by using XRD, SEM technique, DSC, Vickers hardness, Archimedes method to measure the porosity percentage and corrosion rate in different solutions (HCl, NaOH and SEAWATER).The XRD and microstructure results show that all samples with and without additives consist of two phases (β-phase) and (α-phase) at room temperature and the addition of alloying elements in these percentages does not have effect on present phases. the hardness increased with zinc content because the formation of intermetallic compound of CuZn that responsible to hardness while The addition of Si ,Sn and Ni leads to lower the hardness than aluminum. The bulk density increased with the alloys without addition alloying elements(Si, Ni and Sn ) while apparent porosity decreased with it the reason for this phenomenon due to the characterization of alloying elements that addition to the alloy. From the results of corrosion test can be show the alloy with 35wt% Zn have the higher corrosion resistance in all media (HCl, NaOH and sea water) and the addition of alloying element lead to improve the corrosion resistance. Finally, it is observed that the Copper base shape memory alloys with these types of additives are suitable for use in different application.

3 November 2023 in Journal of Biomimetics, Biomaterials and Biomedical Engineering
Verified
Journal Article
Closed access
PDF file
AMAlaa Abed Mohammed
Alaa Abed Mohammed
EAEmad Al-Hassani
Emad Al-Hassani
JOJawad K. Oleiwi
Jawad K. Oleiwi
Polyetheretherketone (PEEK) as alternate biomaterial to traditional metallic implant materials has become greater important. At the same time have greater chemical resistance, mechanical properties, biocompatibility and radiolucency, making it convenient for use as dental and orthopedic implants. In the present study the biological behavior was evaluated of polymer composites based polyetheretherketone combined with various nano hydroxyapatite and nano titanium dioxide blending up to (1.5 wt%). The bioactivity of the specimens was evaluated by investigation apatite formation after immersion for 7 days and 14 days in simulated body fluid (SBF). XRD and SEM were used to approve the bioactivity of the specimens. Cell viability, proliferation, and the cell attachment activity of L929 mouse fibroblast cells was evaluated after (1, 3 & 5) days by MTT assay. Antibacterial property of the specimens versus S. aureus was observed with optical density methods. The results detected that the apatite-like layer formation was clearly observed on specimens after immersion for different period in simulated body fluid (SBF). Moreover, Results of MTT assay recorded the PEEK specimens excited the activity of fibroblasts and therefore a high cytocompatibility was noticed and specimens showed antibacterial properties against S. aureus.

18 May 2021 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
SMSaja A. Moosa
Saja A. Moosa
AJAkram Jabur
Akram Jabur
EAEmad Al-Hassani
Emad Al-Hassani
Electrospinning is considered a promising technology for encapsulating and loading various drugs into nanofibers. Metoprolol tartrate (MPT), hydrophilic therapy, was used as model drug. Metoprolol tartrate was loaded into poly(ɛ-caprolactone) (PCL) via blend and emulsion electospinning. The preparation processes, morphology, chemical structure thermal properties were evaluated. FESEM showed that emulsion electospinning produce larger fiber diameters(301.775nm) when compared to fibers produced by blend electrospinning(112.463, 249.34)nm, the PCL/ span 80 and MPT-PCL by emulsion method which have high fiber diameter than pure PCL and MPT-PCL by blend method and the Tm of pure PCL nanofibers and all drug loaded scaffolds are around 60°C from DSC test, water contact angle to pure PCL electrospun mats hydrophobic character (126.2°), while PCL/span 80, and PCL-drug nanofiber mats showed hydrophilic character. Our study demonstrated the possibility of using electrospinning with a promising good potential toward sustained and controlled drug delivery system.

1 May 2010 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
EAEmad Al-Hassani
Emad Al-Hassani
Epoxy-phenol system were prepared and studied before and after reinforcing withglass fibers (woven roven 0ο-90ο direction) with volume fraction (vf = 48%). Thesamples irradiated with uv radiation with wave length (λ= 320 nm), irradiation energy(1.5 watt/ cm2) for 50 hours. The dielectric constant and thermal conductivitymeasured for all samples before and after irradiation with uv radiation. The resultsshowed that the increasing percentage of phenolic resin in the blends decreasing thedielectric constant and thermal conductivity of all samples before and after irradiationwith uv radiation. While the results before irradiation showed the effect of glass fibersin increasing the dielectric constant and thermal conductivity. Finally the resultsshowed that the dielectric constant decreased, thermal conductivity increased for allsamples after irradiation with uv radiation.