Regardless of the increasingly intensive application of vehicles with electric drives, internal combustion engines are still dominant as power units of mobile systems in various sectors of the economy. In order to reduce the emission of exhaust gases and satisfy legal regulations, as a temporary solution, hybrid drives with optimized internal combustion engines and their associated systems are increasingly being used. Application of the variable compression ratio and diesel fuel injection timing, as well as the tribological optimization of parts, contribute to the reduction in fuel consumption, partly due to the reduction in mechanical losses, which, according to test results, also results in the reduction in emissions. This manuscript presents the results of diesel engine testing on a test bench in laboratory conditions at different operating modes (compression ratio, fuel injection timing, engine speed, and load), which were processed using a zero-dimensional model of the combustion process. The test results should contribute to the optimization of the combustion process from the aspect of minimal particulate matter emission. As a special contribution, the results of tribological tests of materials for strengthening the sliding surface of the aluminum alloy piston and cylinder of the internal combustion engine and air compressors, which were obtained using a tribometer, are presented. In this way, tribological optimization should also contribute to the reduction in particulate matter emissions due to the reduction in fuel consumption, and thus emissions due to the reduction in friction, as well as the recorded reduction in the wear of materials that are in sliding contact. In this way, it contributes to the reduction in harmful gases in the air.

Wear of a friction pair of brake (brake disc and pads), in addition to reducing the active safety of vehicles, leads to the formation of particles that can affect the environment and human health. In addition to the technologies that are being developed for the collection of particles created by the wear of brakes during braking process, today new materials are being introduced, as well as various technologies for processing friction pairs with the aim of reducing brake wear and thus the formation of particles. Furthermore, today, technologies for coating (cladding) the friction surfaces of disc brakes with some materials are increasingly applied and researched, in order to reduce the wear intensity (wear rate) of disc brakes, i.e. the emission of particles created by wear of friction pairs. The aim of this paper is to analyse and review different deposition techniques and materials used for brake discs coatings, as well as the effect it has on the wear rate of friction pair. There are many coating deposition techniques, and special attention is paid to the technology of laser hardfacing of brake rotors.

The research of influencing factors on the electricity consumption of electric buses Higer KLQ6125GEV3 in real working conditions is the result of experimental measurements conducted on the EKO 1 line in Belgrade over a long period which included typical seasonal periods (winter, summer, transitional) of electric bus operation as well as characteristic periods of work during the day (peak load, intermediate period, first/last departures). The results of this research are the basis for reviewing and ranking the influential factors on the electricity consumption of electric buses that are of great importance in planning operations of the line, analysis of energy efficiency and operating conditions.

The braking system is one of the important systems from the aspect of vehicle safety, but it is also one of the systems that has a significant impact on the environment. Brakes are considered to be a source of non-exhaust particles, that is sources that create particles by the wear of the elements that are in contact with each other, and in this case, the brake friction elements (brake pads and rotating disc). Such particles often contain heavy metals that are part of the friction elements. There are a number of influencing factors that can affect the wear of the friction elements and increase the concentration of the formed particles. Laboratory methods of testing wear and particle formation, road tests and various simulations of brake wear are most often used for testing. In this paper, a review of methodologies for testing the formation of particles from the braking system, the materials used in the composition of the friction elements of the brake, as well as factors affecting the wear rate and concentration of particles of different sizes, based on the conclusions of other authors is presented. Based on this review, it can be concluded which quantities and factors need special attention during further research in the mechanism of formation of non-exhaust particles whose source is the vehicle braking system.