Małgorzata A. Kaczorowska

Dr. Małgorzata A. Kaczorowska

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
The development of simple, effective, economical, and environmentally friendly methods for removing hazardous substances of anthropogenic origin from aquatic systems is currently one of the greatest challenges, among others, due to the variety of pollutants and the transformations they may undergo in the environment. In recent years, there has been an increased interest in adsorption methods based on the use of natural polymers, including non-toxic chitosan (CS), which is characterized by good coating properties, biocompatibility, and biodegradability. This review concerns the latest developments (since 2019) in the application of novel chitosan-based materials for the removal of hazardous substances (e.g., metal and metalloid ions, synthetic dyes, pharmaceuticals) from aqueous solutions, with particular emphasis on their most important advantages and limitations, as well as their potential impact on sustainability.

11 November 2022 in Membranes
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
The growing demand for environmentally friendly and economical methods of removing toxic metal ions from polluted waters and for the recovery of valuable noble metal ions from various types of waste, which are often treated as their secondary source, has resulted in increased interest in techniques based on the utilization of polymer inclusion membranes (PIMs). PIMs are characterized by many advantages (e.g., the possibility of simultaneous extraction and back extraction, excellent stability and high reusability), and can be adapted to the properties of the removed target analyte by appropriate selection of carriers, polymers and plasticizers used for their formulation. However, the selectivity and efficiency of the membrane process depends on many factors (e.g., membrane composition, nature of removed metal ions, composition of aqueous feed solution, etc.), and new membranes are systematically designed to improve these parameters. Numerous studies aimed at improving PIM technology may contribute to the wider use of these methods in the future on an industrial scale, e.g., in wastewater treatment. This review describes the latest achievements related to the removal of various metal ions by PIMs over the past 3 years, with particular emphasis on solutions with potential industrial application.

19 January 2023 in Membranes
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
Pollution of the environment, including water resources, is currently one of the greatest challenges due to emerging new contaminants of anthropogenic origin. Of particular concern are emerging organic pollutants such as pharmaceuticals, endocrine disruptors, and pesticides, but also other industrial pollutants, for example, synthetic dyes. The growing demand for environmentally friendly and economical methods of removing emerging contaminants and synthetic dyes from wastewater resulted in increased interest in the possibility of using techniques based on the application of polymer inclusion membranes (PIMs) for this purpose. PIM-based techniques are promising methods for eliminating emerging contaminants and synthetic dyes from aqueous solutions, including wastewater, due to high efficiency, membranes versatility, ease/low cost of preparation, and high selectivity. This review describes the latest developments related to the removal of various emerging contaminants and synthetic dyes from aqueous solutions using PIMs over the past few years, with particular emphasis on research aimed at increasing the effectiveness and selectivity of PIMs, which may contribute to wider use of these methods in the future.

21 October 2023 in Membranes
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
The systematic increase in the use of rare earth elements (REEs) in various technologically advanced products around the world (e.g., in electronic devices), the growing amount of waste generated by the use of high-tech materials, and the limited resources of naturally occurring REE ores resulted in an intensive search for effective and environmentally safe methods for recovering these elements. Among these methods, techniques based on the application of various types of liquid membranes (LMs) play an important role, primarily due to their high efficiency, the simplicity of membrane formation and use, the utilization of only small amounts of environmentally hazardous reagents, and the possibility of simultaneous extraction and back-extraction and reusing the membranes after regeneration. However, because both primary and secondary sources (e.g., waste) of REEs are usually complex and contain a wide variety of components, and the selectivity and efficiency of LMs depend on many factors (e.g., the composition and form of the membrane, nature of the recovered ions, composition of the feed and stripping phases, etc.), new membranes are being developed that are “tailored” to the properties of the recovered rare earth elements and to the character of the solution in which they occur. This review describes the latest achievements (since 2019) related to the recovery of a range of REEs with the use of various liquid membranes (supported liquid membranes (SLMs), emulsion liquid membranes (ELMs), and polymer inclusion membranes (PIMs)), with particular emphasis on methods that fall within the trend of eco-friendly solutions.

17 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
The growing demand for alkali metals (AMs), such as lithium, cesium, and rubidium, related to their wide application across various industries (e.g., electronics, medicine, aerospace, etc.) and the limited resources of their naturally occurring ores, has led to an increased interest in methods of their recovery from secondary sources (e.g., brines, wastewater, waste leachates). One of the dynamically developing research directions in the field of separation of AMs ions from various aqueous solutions is the search for novel, efficient, and “green” materials that could be used in adsorption processes, also on a larger industrial scale. This review concerns the latest achievements (mainly from 2023 to 2024) in the development of innovative adsorption materials (e.g., ion sieves, aluminum-based adsorbents, mineral adsorbents, composites, resins) for the separation of Li+, Cs+, and Rb+ ions from solutions, with particular emphasis on their most important advantages and limitations, as well as their potential impact on the environment.

30 April 2021 in Polymers
Verified
Journal Article
Open access
PDF file
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
WUWłodzimierz Urbaniak
Włodzimierz Urbaniak
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
In this article, the application of a polymer film containing the ionic liquid Cyphos IL 101 for the simultaneous recovery of precious and heavy metal ions ((Ni(II), Zn(II), Co(II), Cu(II), Sn(II), Pb(II), Ag(I), Pd(II), and Au(III)) from waste electrical and electronic equipment (WEEE) is described. The experiments were performed for solutions containing metal ions released from computer e-waste due to leaching carried out with concentrated nitric(V) acid and aqua regia. It was found that the applied polymer film allows for the efficient recovery of precious metals (98.9% of gold, 79.3% of silver, and 63.6% of palladium). The recovery of non-ferrous metals (Co, Ni, Cu, Zn, Sn, and Pb) was less efficient (25–40%). Moreover, the results of the performed sorption/desorption processes show that the polymer film with Cyphos IL 101 can be successfully used after regeneration to recover metals ions several times.