Katarzyna Witt-Kalicińska

Prof. Katarzyna Witt-Kalicińska

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 January 2023 in Membranes
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
Pollution of the environment, including water resources, is currently one of the greatest challenges due to emerging new contaminants of anthropogenic origin. Of particular concern are emerging organic pollutants such as pharmaceuticals, endocrine disruptors, and pesticides, but also other industrial pollutants, for example, synthetic dyes. The growing demand for environmentally friendly and economical methods of removing emerging contaminants and synthetic dyes from wastewater resulted in increased interest in the possibility of using techniques based on the application of polymer inclusion membranes (PIMs) for this purpose. PIM-based techniques are promising methods for eliminating emerging contaminants and synthetic dyes from aqueous solutions, including wastewater, due to high efficiency, membranes versatility, ease/low cost of preparation, and high selectivity. This review describes the latest developments related to the removal of various emerging contaminants and synthetic dyes from aqueous solutions using PIMs over the past few years, with particular emphasis on research aimed at increasing the effectiveness and selectivity of PIMs, which may contribute to wider use of these methods in the future.

30 January 2018 in Polymers
Verified
Journal Article
Open access
PDF file
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
ERElzbieta Radzyminska-Lenarcik
Elzbieta Radzyminska-Lenarcik
AKArtur Kosciuszko
Artur Kosciuszko
MGMagdalena Gierszewska
Magdalena Gierszewska
KZKamil Ziuziakowski
Kamil Ziuziakowski
The transport of Zn(II) ions across polymer inclusion membranes (PIMs) with acetylacetone (ACAC) or di(2-ethylhexyl)phosphoric acid (D2EHPA) as carriers was studied. Polymeric membranes consisting of polyvinylchloride (PVC) as the support, bis(2-ethylhexyl)adipate (DAO) as plasticizer, and ACAC or D2EHPA as ion carriers were investigated. The highest recovery factors for Zn(II) ions were observed in the case of a membrane containing 20% acac (99.6%) and 60% D2EHPA (56.3%). The prepared PIMs were examined using atomic force microscopy (AFM) techniques. Their mechanical properties were also determined. The influence of membrane morphology and mechanical properties on the zinc transport process was discussed.

18 May 2016 in Separation Science and Technology
Verified
Journal Article
Closed access
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
ERElzbieta Radzyminska-Lenarcik
Elzbieta Radzyminska-Lenarcik
WUWlodzimierz Urbaniak
Wlodzimierz Urbaniak
The selective transport of various metal ions through a novel polymer inclusion membrane (PIM) doped with β-diketone derivatives (acetylacetone (1), 3-propyl-acetylacetone (2), and 3-benzyl-acetylacetone (3)) was investigated. Initial fluxes of metal ions transport across PIMs decrease in the following sequence: Zn(II) > Cu(II) > Co(II) > Ni(II). Results show that zinc(II) can be effectively separated by studied PIMs from equimolar aqueous solutions of copper, zinc, cobalt, and nickel nitrates. At pH 7.5 and after 24 hours 87–93% of Zn(II) was recovered. It was found that membranes containing 2 and 3 separate zinc better than PIM with 1. Prepared PIMs were characterized using AFM and thermal analysis techniques.

4 November 2019 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
ERElzbieta Radzyminska-Lenarcik
Elzbieta Radzyminska-Lenarcik
Membrane techniques can be used to separate different compounds, i.e., toxic metal ions from waste waters. As any other method of separation, also this one, based on polymer inclusion membranes (PIMs), has certain limitations. One of them is the stability of membranes. In the present paper, the dependence of the physical and chemical properties on composition of PVC-based polymer inclusion membranes doped with phosphonium ionic liquids (CYPHOS IL 101, CYPHOS IL 104, CYPHOS IL 105 and CYPHOS IL 109) was studied. The thermal stability of investigated membranes was examined by thermogravimetry together with differential thermogravimetry analysis. Obtained results showed that studied PIMs are stable to the temperature of about 170 °C. The membrane morphology was examined by attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy, as well as scanning electron microscopy (SEM). The visibility of all characteristic bands in the ATR-FTIR spectra confirmed the presence of individual components in the membranes: a polymer, a plasticizer and the carriers. It also suggested that there were no signs of the covalent bond formation between the polymer, the plasticizer and the carrier. Only van der Waals or hydrogen bonds could be present. Moreover, in the SEM images of the investigated PIMs a rough surface without pores was observed.

30 April 2021 in Polymers
Verified
Journal Article
Open access
PDF file
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
WUWłodzimierz Urbaniak
Włodzimierz Urbaniak
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
In this article, the application of a polymer film containing the ionic liquid Cyphos IL 101 for the simultaneous recovery of precious and heavy metal ions ((Ni(II), Zn(II), Co(II), Cu(II), Sn(II), Pb(II), Ag(I), Pd(II), and Au(III)) from waste electrical and electronic equipment (WEEE) is described. The experiments were performed for solutions containing metal ions released from computer e-waste due to leaching carried out with concentrated nitric(V) acid and aqua regia. It was found that the applied polymer film allows for the efficient recovery of precious metals (98.9% of gold, 79.3% of silver, and 63.6% of palladium). The recovery of non-ferrous metals (Co, Ni, Cu, Zn, Sn, and Pb) was less efficient (25–40%). Moreover, the results of the performed sorption/desorption processes show that the polymer film with Cyphos IL 101 can be successfully used after regeneration to recover metals ions several times.

18 March 2019 in Polymers
Verified
Journal Article
Open access
PDF file
ERElzbieta Radzyminska-Lenarcik
Elzbieta Radzyminska-Lenarcik
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
The possibility of removing Cu(II), Zn(II) and Pb(II) ions by sorption on new PVC-based composite materials with different contents of acetylacetone (acac) and porophor was investigated. Composites were characterized using a scanning electron microscope and by infrared spectral analysis (FTIR). Sorption tests were conducted at 20 °C. It has been shown that the equilibrium is established in about 4 h. The reduction in ion concentration in the solution depended on the content of both acac and porophor in the composite. The maximal reduction in ion concentration ranged from 8% to 91%, 10–85% and 6–50% for Cu(II), Zn(II) and Pb(II) ions, respectively, depending on the composite composition. The best results were obtained for the composite containing 30% w/w of acac and 10% of porophor. For this composite, the sorption capacity after 4 h sorption for Zn(II), Cu(II) and Pb(II) ions was 26.65, 25.40, and 49.68 mg/g, respectively. Kinetic data were best fitted with a pseudo–second-order equation.