Daria Bożejewicz

Dr. Daria Bożejewicz


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
The development of simple, effective, economical, and environmentally friendly methods for removing hazardous substances of anthropogenic origin from aquatic systems is currently one of the greatest challenges, among others, due to the variety of pollutants and the transformations they may undergo in the environment. In recent years, there has been an increased interest in adsorption methods based on the use of natural polymers, including non-toxic chitosan (CS), which is characterized by good coating properties, biocompatibility, and biodegradability. This review concerns the latest developments (since 2019) in the application of novel chitosan-based materials for the removal of hazardous substances (e.g., metal and metalloid ions, synthetic dyes, pharmaceuticals) from aqueous solutions, with particular emphasis on their most important advantages and limitations, as well as their potential impact on sustainability.

19 January 2023 in Membranes
Verified
Journal Article
Open access
PDF file
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
Pollution of the environment, including water resources, is currently one of the greatest challenges due to emerging new contaminants of anthropogenic origin. Of particular concern are emerging organic pollutants such as pharmaceuticals, endocrine disruptors, and pesticides, but also other industrial pollutants, for example, synthetic dyes. The growing demand for environmentally friendly and economical methods of removing emerging contaminants and synthetic dyes from wastewater resulted in increased interest in the possibility of using techniques based on the application of polymer inclusion membranes (PIMs) for this purpose. PIM-based techniques are promising methods for eliminating emerging contaminants and synthetic dyes from aqueous solutions, including wastewater, due to high efficiency, membranes versatility, ease/low cost of preparation, and high selectivity. This review describes the latest developments related to the removal of various emerging contaminants and synthetic dyes from aqueous solutions using PIMs over the past few years, with particular emphasis on research aimed at increasing the effectiveness and selectivity of PIMs, which may contribute to wider use of these methods in the future.

9 November 2021 in Membranes
Verified
Journal Article
Open access
PDF file
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
DBDaria Bożejewicz
Daria Bożejewicz
WUWłodzimierz Urbaniak
Włodzimierz Urbaniak
This paper presents the results of the first application of N,N'-bis(salicylidene)ethylenediamine (salen) as an extractant in classical liquid–liquid extraction and as a carrier in membrane processes designed for the recovery of noble metal ions (Pd2+, Ag+, Pt2+, and Au3+) from aqueous solutions. In the case of the utilization of membranes, both sorption and desorption were investigated. Salen has not been used so far in the sorption processes of precious metal ions. Recovery experiments were performed on single-component solutions (containing only one type of metal ions) and polymetallic solutions (containing ions of all four metals). The stability constants of the obtained complexes were determined spectrophotometrically. In contrast, electrospray ionization high-resolution mass spectrometry (ESI-HRMS) was applied to examine the elemental composition and charge of the generated complexes of chosen noble metal ions and salen molecules. The results show the great potential of N,N'-bis(salicylidene)ethylenediamine as both an extractant and a carrier. In the case of single-component solutions, the extraction percentage was over 99% for all noble metal ions (molar ratio M:L of 1:1), and in the case of a polymetallic solution, it was the lowest, but over 94% for platinum ions and the highest value (over 99%) for gold ions. The percentages of sorption (%Rs) of metal ions from single-component solutions using polymer membranes containing N,N'-bis(salicylidene)ethylenediamine as a carrier were highest after 24 h of the process (93.23% for silver(I) ions, 74.99% for gold(III) ions, 69.11% and 66.13% for palladium(II) and platinum(II) ions, respectively), similar to the values obtained for the membrane process conducted in multi-metal solutions (92.96%, 84.26%, 80.94%, and 48.36% for Pd(II), Au(III), Ag(I), and Pt(II) ions, respectively). The percentage of desorption (%Rdes) was very high for single-component solutions (the highest, i.e., 99%, for palladium solution and the lowest, i.e., 88%, for silver solution), while for polymetallic solutions, these values were slightly lower (for Pt(II), it was the lowest at 63.25%).

12 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
DBDaria Bożejewicz
Daria Bożejewicz
MKMałgorzata A. Kaczorowska
Małgorzata A. Kaczorowska
The widespread, worldwide utilisation of alkaline batteries requires development of proper recycling methods for used batteries, which are considered both as a secondary source of valuable metals and as a threat to the environment (may contain toxic substances). As many separation methods of metal ions from battery leachates are based on the use of substances that require complex synthesis or are not eco-safe, new materials suitable for this purpose are systematically sought. Therefore, in this study, the results of the separation of Ni(II), Zn(II) and Mn(II) ions from alkaline battery leachates using polymer materials (PMs) impregnated with easily synthesised, “green” deep eutectic solvents (DESs) or with ionic liquids (ILs) were presented. Additionally, PMs surface wettability were determined and their chemical compositions were analysed using the Fourier transform infrared spectroscopy–attenuated total reflectance (FTIR–ATR) method. Among all PMs synthesised, materials containing DESs (composed of Aliquat 336 or Cyphos IL 101 and diacetamide) performed best in the separation of Ni(II) ions (removal of 93.42% and 80.86%). The application of DES-based PMs for the separation of metal ions from battery leachates is in line with green chemistry principles, and such materials can potentially be used in the processing of e-waste.

22 December 2022 in Molecules
Verified
Journal Article
Open access
PDF file
KWKatarzyna Witt-Kalicińska
Katarzyna Witt-Kalicińska
Waldemar StudzińskiWaldemar Studziński
Waldemar Studziński
DBDaria Bożejewicz
Daria Bożejewicz
This paper aims to propose an alternative to the known permeable reactive barriers (PRBs). PRB is one of the methods, which is a reactive barrier placed below the ground, to clean up contaminated groundwater. New polymer active substrates (ASs) were used to prevent soil contamination by toxic heavy metals. The active substrates consisted of a mixture of poly(vinyl chloride), Aliquat 336, and bis(2-ethylhexyl)adipate, which was applied to the skeleton material (fiberglass or textile). Aliquat 336 was used as a binding agent for metal ions (Cr(VI), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II)). In contrast with the PRBs, the ASs (from AS-1 to AS-5) were obtained in a simple way using the pouring method. The obtained ASs could be recycled and reused. The active substrates were used for the binding of various metal ions from aqueous solutions and the examined soil. It was found that the active substrate AS-1 decreased the concentrations of nickel, cadmium, and lead by more than 50% and that of chromium by more than 90% in the aqueous solution. High sorption efficiency for chromium and zinc metals (81% and 66%) with the use of AS-2 was also found, owing to which the migration of metals from soil to water can be limited. In the soil environment, active substrate AS-5 with the addition of a plasticizer showed the greatest effectiveness. This solution resulted in a reduction in each tested metal ion of at least 50%, and reductions in cadmium, lead, and copper of over 70%.