Novel methods have been developed to measure the fractional deposition efficiency for nanoparticles of full-scale HVAC and HEPA filter cassettes down to a particle size of 3.5 nm. The methods use a flame spray nanoparticle generator to produce NaCl test aerosols with narrow size distributions and very high concentrations. While the efficiency curves of lower efficiency filters of classes F7 and E10 were still able to be determined by measuring the size distributions of the polydisperse test aerosols upstream and downstream of the filter, two new testing procedures were developed for high efficiency filters of class H13. One considers the narrow size distributions of the test aerosols as quasi-monodisperse and follows a similar approach like EN 1822 for flat sheet media. The second one evaluates mobility classified fractions of the quasi-monodisperse test aerosols. A dedicated multiple charge correction scheme was developed to account for the effect of multiply charged particles. While the latter procedure allows to extend the particle size range, the prior significantly reduces the measurement time. All tests delivered meaningful results, which were very comparable with the results from flat sheet media tests.

The World Health Organization has pointed out that airborne transmission via aerosol particles can be a strong vector for the spread of SARS-CoV-2. Protecting occupants from infectious diseases or harmful particulate matter (PM) in general can be challenging. While experimentally outlining the detailed flow of PM in rooms may require complex setups, computational fluid dynamics (CFD) simulations can provide insights into improving the safety of the built environment and the most effective positioning of air-purifying devices. While previous studies have typically leveraged Reynolds-averaged Navier–Stokes (RANS) approaches for predicting particle propagation, the turbulence length scales accurately captured in these simulations may not be sufficient to provide a realistic spread and the mixing of particles under the effects of forced convection. In this paper, we experimentally validate a Lattice Boltzmann very large eddy simulation (VLES) approach including particle modeling. We also demonstrate how this simulation approach can be used to improve the effectiveness of air filtration devices in realistic office environments.