Despite the potential applicability of the combination between aluminium (anode) and graphite or titanium (cathode) for poultry slaughterhouse wastewater treatment, their technical and economic feasibilities have not been comprehensively captured. In this study, aluminium (anode) and graphite and titanium as cathode electrode materials were investigated and compared in terms of their performance on poultry slaughterhouse wastewater treatment. The wastewater samples collected from the Izhevsk Production Corporative (PC) poultry farm in Kazakhstan were treated using a lab-based electrochemical treatment plant and then analyzed after every 20 and 40 min of the treatment processes. Cost analysis for both electrode combinations was also performed. From the analysis results, the aluminium–graphite electrode combination achieved high removal efficiency from turbidity, color, nitrite, phosphates, and chemical oxygen demand, with removal efficiency ranging from 72% to 98% after 20 min, as well as 88% to 100% after 40 min. A similar phenomenon was also observed from the aluminium–titanium electrode combination, with high removal efficiency achieved from turbidity, color, total suspended solids, nitrite, phosphates, and chemical oxygen demand, ranging from 81% to 100% after 20 min as well as from 91% to 100% after 40 min. This means the treatment performances for both aluminium–graphite and aluminium–titanium electrode combinations were highly affected by the contact time. The general performance in terms of removal efficiency indicates that the aluminium–titanium electrode combination outperformed the aluminium–graphite electrode combination. However, the inert character of the graphite electrode led to a positive impact on the total operating cost. Therefore, the aluminium–graphite electrode combination was observed to be cheaper than the aluminium–titanium electrode combination in terms of the operating cost.
Treatment of poultry slaughterhouse wastewater before disposal or reuse is an essential part of human health and environmental protection in general. This study aimed to investigate the influence of the pre-treatment system based on electrolysis technology within an integrated lab-scale treatment plant in the removal of contaminants from poultry slaughterhouse wastewater. Several treatment units (averaging tank, feather catcher, fat catcher, and coarse mechanical filter) were connected in series before the electrolysis chamber. While in general, the entire integrated system also included some other units such as ultra-filtration, reverse osmosis, and the ultraviolet lamp connected in series. From the analysis results, it was observed that the pre-treatment phase with electrolysis had a significant influence on the general performance of the treatment plant. The pre-treatment contributed to about 33.5% to 100% in the general contaminants’ removal efficiency. The highest contribution was observed from the total chlorine (100%), nitrate (98.2%), as well as BOD (95.3%). The lowest contribution was observed from the nitrite removal, with 33.5%. This study revealed further that the integration of electrolysis technology in a wastewater treatment system has a significant potential for developing an effective wastewater treatment plant.
Relevance. Insufficient feeding has a negative effect on the metabolism and health of the cow, as well as on the condition of the offspring being born. Weak calves that have not accumulated reserve nutrients by birth are susceptible to various diseases.The purpose of the work is to study the effect of the use of mineral feed additives when feeding heifers on the growth and development, safety of newborn young.Methods. To conduct the study in a typical breeding plant for the region, 3 groups of heifers (10 heads each) were formed — a control group and two experimental ones based on the principle of pairs of analogues. The safety of calves and their weight growth were assessed by weighing individually and calculating growth indicators according to generally accepted methods and formulas. The impact of the use of mineral feed additives when feeding heifers during the deadwood period on the health of calves was evaluated.Results. It was found that the use of such mineral feed additives as zeolite from the Karinsky deposit and “Mineral Active” to heifers in the third trimester of pregnancy had a positive effect on the growth and safety of newborn calves. Calves of the experimental groups had a live birth weight significantly higher than calves obtained from heifers of the control group. To some extent, this had an impact on the live weight of calves at 3 months of age (p < 0.01). Despite the significant difference in live weight and average daily live weight gains in favor of calves of the experimental groups, the relative increase (or growth intensity) turned out to be higher in calves of the control group with almost unchanged growth multiplicity.
Relevance. Holstein dairy cattle are bred in the Sverdlovsk region, its improvement is carried out by selecting and selecting the best for further breeding. In order for them to display their genetic potential of productivity, it is necessary to ensure a balanced diet. The purpose of the work is to evaluate the productive qualities of cows against the background of the use of mineral feed additives.Methods. To conduct the study in a typical breeding reproducer for the region, 3 groups of heifers in the last trimester of pregnancy (10 heads each) were formed — a control group and two experimental ones based on the principle of pairs of analogues. The dairy productivity of cows for the first lactation was assessed by control milking once a month. The fat and protein content in milk was assessed in an average milk sample once a month from each cow. Reproduction indicators were established by the duration of the periods of the reproduction cycle and the coefficient of reproductive ability.Results. As a result of the research, it was found that the use of mineral feed additives zeolite of the Karinsky deposit and “Mineral Active” in feeding heifers had a positive effect on milk productivity and reproductive qualities of first-calf cows. The highest milk yield for lactation was shown by the first heifers of the 3rd group, who received the “Mineral Active” mineral supplement for 15 days before calving. The fat content was higher in the milk of cows of the 2nd group, protein — in the milk of cows of the 3rd group. The primary heifer cows of the 3rd group had an advantage in the yield of milk fat and protein, which surpassed their peers in these indicators by 10.1 kg (2.9%, group 2) and 32.6 kg (9.3%, group 1) in milk fat and by 21.0 kg (6.9%) and 29.8 kg (9.8%) of milk protein, respectively. The animals receiving mineral feed additives in the diet were distinguished by a shorter service period, which turned out to be lower by 29.0% and 14.0%, respectively, compared with animals of the 1st group (control). Cows of all groups had an average fruiting period of 286 ± 2.9 — 289 ± 3.2 days.
Relevance. Economic efficiency is the most important fact when introduction the new types of products into production. The article represents an assessment of the economic efficiency in case of introducing of the functional food products into mass production. An assessment of the costs of launching products into production has been conducted; the selling price of a unit of production will be 67.70 rubles per one piece. It has been established that due to the introduction of new types of products into production, the proceeds will increase in 3 years by 623.88 thousand rubles, which is more than 8%. It has been calculated and proven that investments in this project will be quite profitable, as confirmed by the positive value of the net present value. The estimated payback period of the project will be 4 months. Investment in this project will help to increase the return on costs from 21.21% to 21.39% and the return on sales from 17.50% to 17.62%.Results. The results of analysis of the economic efficiency of implementation of project for the production of a functional bakery product, confirm that this project is cost-effective.
27 December 2022 in Theory and practice of meat processing
Studies were carried out to find the new ways to improve the efficiency of iodine use for the young pigs. During the scientific and economic experiment it was found that bringing iodine to the physiological norm, in combination with introduction of 3% bentonite clay into the diets of young fattening pigs, provided a positive effect on the morphological composition of carcasses, slaughter parameters and meat quality of the pigs. So fattening the yelts with the diets with a physiological norm of iodine in combination with 3% bentonite clay allowed young pigs of the 3rdexperimental group to reach a slaughter weight of 78.95 kg at the age of 8 months, which is 10.1% more than in the control group, and 4.2% and 2.5% more in comparison with the 1st and 2nd experimental groups. The slaughter yield in yelts of the 3rdexperimental group increased by 2.43% (P<0.05) compared to the control group. The largest (30.17 cm2) area of the “rib eye” was recorded in the 3rdexperimental group, which is 5.60% more than the control one, while the carcasses of pigs of the 3rdexperimental group contained muscle tissue by 4.74% (P<0.05) more than the same in the control group. Analysis of the Musculus longissimus showed a significant increase in protein content in the 3rdexperimental group by 1.22% compared to the control group (P<0.05). The protein-quality parameter was significantly higher in the muscle tissue of young pigs of the 3rdexperimental group and amounted to 10.90 (P<0.05), which is 1.12% higher than in the muscle tissue of the control group yelts. The maximum content of oleic acid was found in the lard of animals of the 3rdexperimental group — 49.59, which is 1.28% (P<0.05) higher than in the control group.