Industrial activities produce a variety of pollutants that may not be easily treated using centralized wastewater treatment systems based on a single treatment unit. The variability of the pollutants brings the importance of industrial-specific integrated wastewater treatment plants such as integrated membrane filtration systems. However, the performance of a membrane filtration process can be highly affected by the presence of high amounts of suspended particles in the raw wastewater. Therefore, proper selection of a pre-treatment unit prior to a membrane filtration wastewater treatment system is a key aspect of its performance. This study investigated the performance of an integrated membrane filtration treatment system connected to an electrochemical process (pre-treatment) on the purification of a poultry slaughterhouse wastewater toward achieving a high-quality effluent. The industrial-scale treatment plant installed at the Izhevsk Production Corporative (PC) poultry farm in Kazakhstan is composed of an electrochemical, ultrafiltration (UF), and reverse osmosis (RO) as the main treatment units. From the analysis results, the electrochemical pre-treatment unit was observed to be highly effective for the removal of some physicochemical parameters such as turbidity, color, total suspended solids, total iron, aluminum, chemical oxygen demand, and biochemical oxygen demand; with removal efficiency ranging from 71 to 85%. The low removal efficiency of the pre-treatment system was also observed from free and total chlorine, nitrites, nitrates, phosphates, and ammonium nitrogen; with removal efficiency ranging from 4 to 45%. While in general, the overall treatment train was observed to be highly efficient for some physicochemical parameters such as turbidity, color, total suspended solids, as well as chemical and biochemical oxygen demand; maintaining almost 100% removal efficiency throughout the study period. Also, the high removal efficiency of the electrochemical pre-treatment processes led to a relatively low rate of cake formation on the membrane filters.
Despite the potential applicability of the combination between aluminium (anode) and graphite or titanium (cathode) for poultry slaughterhouse wastewater treatment, their technical and economic feasibilities have not been comprehensively captured. In this study, aluminium (anode) and graphite and titanium as cathode electrode materials were investigated and compared in terms of their performance on poultry slaughterhouse wastewater treatment. The wastewater samples collected from the Izhevsk Production Corporative (PC) poultry farm in Kazakhstan were treated using a lab-based electrochemical treatment plant and then analyzed after every 20 and 40 min of the treatment processes. Cost analysis for both electrode combinations was also performed. From the analysis results, the aluminium–graphite electrode combination achieved high removal efficiency from turbidity, color, nitrite, phosphates, and chemical oxygen demand, with removal efficiency ranging from 72% to 98% after 20 min, as well as 88% to 100% after 40 min. A similar phenomenon was also observed from the aluminium–titanium electrode combination, with high removal efficiency achieved from turbidity, color, total suspended solids, nitrite, phosphates, and chemical oxygen demand, ranging from 81% to 100% after 20 min as well as from 91% to 100% after 40 min. This means the treatment performances for both aluminium–graphite and aluminium–titanium electrode combinations were highly affected by the contact time. The general performance in terms of removal efficiency indicates that the aluminium–titanium electrode combination outperformed the aluminium–graphite electrode combination. However, the inert character of the graphite electrode led to a positive impact on the total operating cost. Therefore, the aluminium–graphite electrode combination was observed to be cheaper than the aluminium–titanium electrode combination in terms of the operating cost.
The food industry is one of the sectors that produces considerable amounts of solid waste on a daily basis. Handling such waste has been a significant issue of worldwide concern. As a result, research into developing low-cost and effective technology for the recovery of food waste is critical in order to keep pace with the rapidly developing world. This research investigated the potential of maggot production on the recovery of food waste. Four different food waste materials (banana, starch, pineapples, and oranges) were taken into consideration. Additionally, the effect of the fly attractant on the production system’s overall performance was assessed; the fly attractant was a mixture of cattle blood and meat waste. With a correlation index of 0.96 (without fly attractant) and 0.87 (with fly attractant), the number of days before harvesting and the average maggot weight had a very high (positive) correlation. Moreover, it was observed that using a fly attractant increased maggot yield substantially. For instance, the banana materials produced up to 94 g/kg of maggot weight on the eighth day, which is approximately a 32.4% increase from the same material without fly attractant. On the other hand, the trials’ relative dry weight reduction ranged from 52.5% to 82.4%. The results of this study also showed that producing maggots can be a practical method for recovering food waste, particularly when combined with the use of a fly attractant. The residue from the maggot production process can be applied as an organic fertilizer.
This review addresses the concept of genetic load from the point of view of molecular genetics, development and efforts in selective breeding. As typical examples, the assessment of animals in the Holstein breed and its high-blooded crossbreeds is considered for mutations that cause three inherited diseases: bovine leukocyte adhesion deficiency (CD18 locus), complex vertebral malformation (SLC35A3 locus), and brachyspina (FANCI locus). The reasons for their occurrence and accumulation in the breeding herds of the black-pied genealogical root are discussed. These include an intense artificial-selection of bulls and cows in highly productive herds and the intensive sale (within and between countries) of breeding material (animals, semen, embryos) from a small population of sires from countries with a high level of dairy-cattle breeding development. There is a founder effect when the source of mutant-allele spread is a prominent sire. For example, the greatest contribution to the spread of mutant alleles CD18G, SLC35A3T and FANCIBY was made by the descendants of three closely related bulls. A genogeographic generalization of the mutation occurrence in the world and Russia is provided for these hereditary-disease loci and, includes a total of 31 countries where these mutations were detected. The genetic-load classification for these and other mutations is given. The mutations are inherited both recessively (CD18G, SLC35A3T, FANCIBY) and codominantly (CSN3A, CSN3C, CSN3E, CSN2A1, CSN2B). Genetic load is classified into the following types: mutational, segregation, substitutional, and immigration. For each of these, examples are given that explain their occurrence. Overall, it can be concluded that the phenomenon of genetic load in industrial herds of dairy cattle requires special attention when creating healthy livestock and obtaining high-quality dairy products.