Tetiana Tepla

Dr. Tetiana Tepla


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2020
Verified
Conference Paper
Closed access
Ivan IzoninIvan Izonin
Ivan Izonin
TTTetiana Tepla
Tetiana Tepla
DDDmytro Danylyuk
Dmytro Danylyuk
RTRoman Tkachenko
Roman Tkachenko
Zoia DuriaginaZoia Duriagina
Zoia Duriagina
ILIhor Lemishka
Ihor Lemishka
Decision making process is an important task in many industries. The design of the intelligent decision support systems is of particular importance in areas where the final decision is difficult to make by the operator, which significantly affects both material costs and human health. The paper investigates the possibility of using the artificial intelligence tools in Materials Science. The authors solved the problem of choosing the optimal class of Ti-based powders with a given fractional composition and properties for the manufacture of medical implants by 3D printing. For this purpose, based on the formed data sample, the efficiency of application of a number of existing and improved machine learning algorithms is investigated. Experimental evaluations of their efficiency for different indicators of accuracy and also speed of its work are presented. The application of the optimal machine learning method to solve the problem is determined and substantiated.

1 January 2022 in Ukrainian journal of mechanical engineering and materials science
Verified
Journal Article
Closed access
TTTetiana Tepla
Tetiana Tepla
EPEduard Pleshakov
Eduard Pleshakov
JSJan Sieniawski
Jan Sieniawski
LBLidiya Bohun
Lidiya Bohun
Corrosion is one of the main processes that cause problems when using metal implants in the environment of the human body. Due to its properties, titanium and its alloys are currently the most widely used biocompatible materials. But the use of implants made of titaniumbased alloys is not always successful. The purpose of our research was to establish the reasons for the rejection of a Swiss firm’s dental implant made of Grade 5 titanium alloy. Implanted in the patient’s jawbone, it worked as a support for an artificial tooth. But after 1 year of operation, inflammatory processes began at the implantation site, which ultimately led to rejection of the implant. To establish the material science reasons for this, we conducted microstructural studies using an electron microscope Zeiss EVO 40XVP. The sample was metallograpically prepared by grinding, polishing, and etching by using Kroll’s Reagent. A statistical image processing program was used to estimate the quantitative ratio of the phase components of the implant alloy Image J. Elemental analysis and mapping elements were also performed to know the compositional and distribution of each element Ti, Al and V by using energy dispersive X-Ray spectroscopy coupled in SEM. The hardness value was determined using Vickers microhardness tester. The conducted studies established that the working surface of the implant suffered corrosion damage during operation. The edges of the implant are uneven with open and closed pitting. In some places, the merging of several pittings is observed, which leads to the occurrence of ulcerative corrosion. Elemental analysis established the redistribution of chemical elements in the surface layers as a result of contact with the biological environment of the human body. Unstable compounds are created on the surface, which dissolves in the human body during use. As it follows from the conducted studies, the degraded surface of the dental implant needs additional protection.

1 January 2025 in Journal of Achievements in Materials and Manufacturing Engineering
Verified
Journal Article
Closed access
LBL. Bohun
L. Bohun
Dariusz MierzwińskiDariusz Mierzwiński
Dariusz Mierzwiński
TTTetiana Tepla
Tetiana Tepla
SGS. Gądek
S. Gądek
MAREK NYKIELMAREK NYKIEL
MAREK NYKIEL
AVA.-M. Vasylieva
A.-M. Vasylieva
The current trends in the development of additive technologies, which are actively used in various industries, have been analysed. Special attention was found to be paid to polylactic acid (PLA), an environmentally friendly and biodegradable polymer widely used in 3D printing due to its low melting point and cost-effectiveness. The tribological properties of PLA were improved by adding clay in different concentrations and changing the filling type during printing. The highest indicators of wear resistance and the minimum coefficient of friction were found in the PLA/0.1Clay composite with Grid 90/85 filling. Such a type of filling provided optimal tribological properties for all composites due to the implementation of an abrasive wear mechanism accompanied by plastic deformation. It was revealed that the introduction of clay plasticized the material, which resulted in the widening of the sliding tracks.Pure PLA and PLA/Clay composites with different clay concentrations (0.1, 0.2, 0.3 g per 50 g PLA) were used for the study. The samples were printed with Sphere/100, Grid 90/100 and Grid 90/85 infill to study the effect of structure and density on tribological properties. Density, clay distribution (SEM), tribological tests, as well as wear track structure and friction mechanisms were investigated. The nature of clay distribution in the obtained filaments was evaluated by scanning electron microscopy (SEM) on a JSM-IT200 scanning electron microscope (Tokyo, Japan). To establish the elemental composition of the clay used to create the filaments, X-ray fluorescence analysis was performed on a CEP-01 Elvax Light X-ray spectrometer. The hardness of the samples was measured by indentation according to the Shore method on the Shore hardness tester HT-6510D. Tribological studies of the obtained samples were carried out according to the ball-on-disk scheme on the Tester T-01M computerized friction machine. The microstructure of the surfaces of the studied samples was analysed using an MBS-9 microscope.The influence of the chemical composition of PLA/Clay and the type of filler on the tribological characteristics, including wear resistance, wear intensity and friction mechanisms, was evaluated. The optimal composite composition (PLA/0.1Clay) and the type of filler (Grid 90/85) were determined to ensure the best performance properties.The work focuses on PLA/Clay composites and dry friction conditions, which require further research for other fillers and operating environments. The results provide a basis for developing environmentally friendly wear-resistant materials with improved tribotechnical properties.The study demonstrates the potential of PLA composites for parts operating in friction pairs without lubrication, particularly in the automotive, medical and textile industries. The results contribute to the development of additive manufacturing for manufacturing wear-resistant parts with complex geometries.The article comprehensively analyses the influence of the composition of PLA composites with the addition of clay and the type of filling during 3D printing on tribological properties. The proposed combination of materials science and tribological methods for optimizing polymer properties significantly contributes to the development of environmentally friendly materials and 3D printing technologies.

1 January 2025 in Archives of Materials Science and Engineering
Verified
Journal Article
Closed access
DKD. Kuts
D. Kuts
VYV. Yefanov
V. Yefanov
OHO. Halienkova
O. Halienkova
OOO. Ovchynnykov
O. Ovchynnykov
TTTetiana Tepla
Tetiana Tepla
Dariusz MierzwińskiDariusz Mierzwiński
Dariusz Mierzwiński
The key task of designing and operating modern aviation gas turbine engines (AGTEs), which operate at high temperatures and pressures, is to increase their reliability and durability. In particular, it applies to the swirler of the combustion chamber, which ensures the uniformity of the heat load. Traditional casting methods of manufacturing such parts are time-consuming and accompanied by the formation of technological defects and a decrease in the efficiency of blowing along the contours. The application of additive manufacturing using powders of heat-resistant high-nickel alloys allows you to eliminate these shortcomings, integrate the swirler parts into one single part, increase the efficiency of the production process and reduce the risk of defects. The aim of our work was to optimise the design of the swirler and develop the technological process of its manufacturing.Spherical nickel superalloy powders IN718 were researched in two size ranges, 50...200 μm and ≤ 63 μm. Metallographic research was performed on an EVO-40XVP scanning electron microscope; elemental analysis was performed on an OXFORD INCA Energy 350 energy dispersive spectrometer. The granulometric characteristics of the powders were determined using ImageJ software. The swirler was manufactured on the EOS M400 unit using the L-PBF method, the essence of which is the successive layer-by-layer fusion of the powder alloy. To increase the density and mechanical properties of the parts, hot isostatic pressing was performed.Combining several components of the swirler of aviation gas turbine engines into one part simplifies the design, reduces weight, and increases its technical and aerodynamic characteristics. The possibility of CAD modelling in designing complex geometric shapes and using L-PBF technology in manufacturing achieves it.Due to the accuracy of the reproduction of the given geometry of the outer and inner surfaces of the swirler and the maximum packing density of the pre-set granulometric parameters of the powder mixtures of the IN 718 alloy, it was possible to obtain the maximum reproducibility of the parts in 3D printing. It, in turn, will reduce the load on the structural components of the combustion chamber and turbine of the engine, increase the efficiency of its operation, and optimize the fuel combustion conditions. The swirler printed as a single part is characterised by greater stability of geometric characteristics that do not exceed permissible deviations and, as a result, stabilize the overall airflow along the contours.Based on the obtained research results, it was possible to increase the reliability and efficiency of the manufactured parts of aviation gas turbine engines.A new approach to the modeling and manufacturing a swirler for an aircraft gas turbine engine is proposed.


1 July 2025 in Materials Science
Verified
Journal Article
Closed access
PDF file
TTTetiana Tepla
Tetiana Tepla
Zoia DuriaginaZoia Duriagina
Zoia Duriagina
DMD. Mierzhwiński
D. Mierzhwiński
MAREK NYKIELMAREK NYKIEL
MAREK NYKIEL
Kinga KorniejenkoKinga Korniejenko
Kinga Korniejenko
AAA. V. Andreikiv
A. V. Andreikiv