Distributed Acoustic Sensing (DAS) has become a popular method of observing seismic wavefields: backscattered pulses of light reveal strains or strain rates at any location along a fiber‐optic cable. In contrast, a few newer systems transmit light through a cable and collect integrated phase delays over the entire cable, such as the Microwave Frequency Fiber Interferometer (MFFI). These integrated systems can be deployed over significantly longer distances, may be used in conjunction with live telecommunications, and can be significantly cheaper. However, they provide only a single time series representing strain over the entire length of the fiber. This work discusses theoretically how a distributed and integrated system can be quantitatively compared, and we note that the sensitivity depends strongly on points of curvature. Importantly, this work presents the first results of a quantitative, head‐to‐head comparison of a DAS and the integrated MFFI system using pre‐existing telecommunications fibers in Athens, Greece.
An easy-to-implement and cost-effective Fiber Bragg Grating (FBG) sensor interrogation technique based on a ring Erbium-Doped Fiber Laser (EDFL) topology is proposed and experimentally assessed. The FBG sensor is part of the EDFL cavity and must have a central wavelength located within the linear region of the EDF’s amplified spontaneous emission (ASE) spectrum, which occurs at between 1530 and 1540 nm. In this manner, the wavelength-encoded response of the FBG under strain is converted to a linear variation in the laser output power, removing the need for spectrum analysis as well as any limitations from the use of external edge-filtering components. In addition, the laser linewidth is significantly reduced with respect to the FBG bandwidth, thus improving the resolution of the system, whereas its sensitivity can be controlled through pumping power. The performance of the system has been characterized by modeling and experiments for EDFs with different lengths, doping concentrations, and pumping power levels. The influence of mode-hopping in the laser cavity on the resolution and accuracy of the system has also been investigated.
5 October 2018 in IEEE Journal of Quantum Electronics
The operation of two 40 GHz semiconductor passively mode locked lasers that are coupled under mutual injection is investigated using a finite-time domain travelling wave numerical model. A detailed mapping of the pulse properties versus the operating parameters and the coupling conditions shows that the lasers can operate with a high degree of synchronization when the optical distance between the lasers is around integer multiples of their cavity length. The synchronized operation is maintained within a significant range around integer values of the normalized laser distance, and depends on the laser pulsewidth and linewidth enhancement factor as well as on the repetition rate mismatch.
We study theoretically the operation of two semiconductor passively mode-locked lasers laterally coupled through evanescent fields. The investigation is carried out using a time domain traveling wave numerical model for two-section lasers (gain and absorption) enhanced to include weak mutual coupling. The study of the coupled system shows that although the operation is dominated mostly by instabilities and amplitude modulated pulse trains, under specific conditions, stable mode locking with low intensity noise and time-synchronized pulses emerges. The influence of operational and geometrical parameters on the coupled dynamics is identified and discussed.
An easy to implement and cost-effective Fiber Bragg Grating (FBG) sensor interrogation technique based on a ring Erbium-Doped Fiber Laser (EDFL) topology is proposed and experimentally assessed. The FBG sensor is part of the EDFL cavity and must have a central wavelength located within the linear region of the EDF’s amplified spontaneous emission (ASE) spectrum which occurs between 1530 and 1540nm. In this manner, the wavelength-encoded response of the FBG under strain is converted to a linear variation of the laser output power, removing the need for spectrum analysis as well as any limitations from the use of external edge-filtering components. In addition, the laser linewidth is significantly reduced with respect to the FBG bandwidth thus improving the resolution of the system, whereas its sensitivity can be controlled through the pumping power. The performance of the system has been characterized by modeling and experiments for EDF's with different lengths, doping concentrations and pumping power levels. The influence of mode-hopping in the laser cavity on the resolution and accuracy of the system has also been investigated.