Distributed Acoustic Sensing (DAS) has become a popular method of observing seismic wavefields: backscattered pulses of light reveal strains or strain rates at any location along a fiber‐optic cable. In contrast, a few newer systems transmit light through a cable and collect integrated phase delays over the entire cable, such as the Microwave Frequency Fiber Interferometer (MFFI). These integrated systems can be deployed over significantly longer distances, may be used in conjunction with live telecommunications, and can be significantly cheaper. However, they provide only a single time series representing strain over the entire length of the fiber. This work discusses theoretically how a distributed and integrated system can be quantitatively compared, and we note that the sensitivity depends strongly on points of curvature. Importantly, this work presents the first results of a quantitative, head‐to‐head comparison of a DAS and the integrated MFFI system using pre‐existing telecommunications fibers in Athens, Greece.
4 October 2023 in Physics of the Earth and Planetary Interiors
We report what is believed to be the first experimental demonstration of soliton content as a function of the intensity of input light for multicolor quadratic solitons. Experiments were conducted with spatial solitons excited with Gaussian beams in a bulk crystal cut for second-harmonic generation. The effects introduced by the finite crystal length and by the scheme employed to elucidate the soliton energy are highlighted.
23 April 2012 in Journal of the Optical Society of America B
In this paper we present experimental results related to the dynamic switching of the emission wavelength of a passively mode-locked InAs/InGaAs quantum dot laser. The wavelength switching is achieved through application of varying optical feedback, as opposed to varying electrical biasing conditions, whereas the different regimes of operations include pulse operation either from the ground or the excited state and dual mode locking. Furthermore, through the same technique, -switching elimination was achieved, allowing stable pulse amplitude, which is a highly desired feature in many applications.
An easy-to-implement and cost-effective Fiber Bragg Grating (FBG) sensor interrogation technique based on a ring Erbium-Doped Fiber Laser (EDFL) topology is proposed and experimentally assessed. The FBG sensor is part of the EDFL cavity and must have a central wavelength located within the linear region of the EDF’s amplified spontaneous emission (ASE) spectrum, which occurs at between 1530 and 1540 nm. In this manner, the wavelength-encoded response of the FBG under strain is converted to a linear variation in the laser output power, removing the need for spectrum analysis as well as any limitations from the use of external edge-filtering components. In addition, the laser linewidth is significantly reduced with respect to the FBG bandwidth, thus improving the resolution of the system, whereas its sensitivity can be controlled through pumping power. The performance of the system has been characterized by modeling and experiments for EDFs with different lengths, doping concentrations, and pumping power levels. The influence of mode-hopping in the laser cavity on the resolution and accuracy of the system has also been investigated.
5 October 2018 in IEEE Journal of Quantum Electronics
The operation of two 40 GHz semiconductor passively mode locked lasers that are coupled under mutual injection is investigated using a finite-time domain travelling wave numerical model. A detailed mapping of the pulse properties versus the operating parameters and the coupling conditions shows that the lasers can operate with a high degree of synchronization when the optical distance between the lasers is around integer multiples of their cavity length. The synchronized operation is maintained within a significant range around integer values of the normalized laser distance, and depends on the laser pulsewidth and linewidth enhancement factor as well as on the repetition rate mismatch.