Napisah Sapiai

Dr. Napisah Sapiai

Universiti Teknologi MARA (UiTM), Shah Alam

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 November 2020 in Polymers
Verified
Journal Article
Open access
PDF file
Napisah SapiaiNapisah Sapiai
Napisah Sapiai
AJAidah Jumahat
Aidah Jumahat
Mohammad JawaidMohammad Jawaid
Mohammad Jawaid
MMMohamad Midani
Mohamad Midani
Anish KhanAnish Khan
Anish Khan
This paper investigates the influence of silica nanoparticles on the mechanical properties of a unidirectional (UD) kenaf fiber reinforced polymer (KFRP) and hybrid woven glass/UD kenaf fiber reinforced polymer (GKFRP) composites. In this study, three different nanosilica loadings, i.e., 5, 13 and 25 wt %, and untreated kenaf fiber yarns were used. The untreated long kenaf fiber yarn was wound onto metal frames to produce UD kenaf dry mat layers. The silane-surface-treated nanosilica was initially dispersed into epoxy resin using a high-vacuum mechanical stirrer before being incorporated into the UD untreated kenaf and hybrid woven glass/UD kenaf fiber layers. Eight different composite systems were made, namely KFRP, 5 wt % nanosilica in UD kenaf fiber reinforced polymer composites (5NS-KFRP), 13% nanosilica in UD kenaf fiber reinforced polymer composites (13NS-KFRP), 25 wt % nanosilica in UD kenaf fiber reinforced polymer composites (25NS-KFRP), GKFRP, 5 wt % nanosilica in hybrid woven glass/UD kenaf fiber reinforced polymer composites (5NS-GKFRP), 13 wt % nanosilica in hybrid woven glass/UD kenaf fiber reinforced polymer composites (13NS-GKFRP) and 25 wt % nanosilica in hybrid woven glass/UD kenaf fiber reinforced polymer composites (25NS-GKFRP). All composite systems were tested in tension and bending in accordance with ASTM standards D3039 and D7264, respectively. Based on the results, it was found that the incorporation of homogeneously dispersed nanosilica significantly improved the tensile and flexural properties of KFRP and hybrid GKFRP composites even at the highest loading of 25 wt % nanosilica. Based on the scanning electron microscopy (SEM) examination of the fractured surfaces, it is suggested that the silane-treated nanosilica exhibits good interactions with epoxy and the kenaf and glass fibers. Therefore, the presence of nanosilica in an epoxy polymer contributes to a stiffer matrix that, effectively, enhances the capability of transferring a load to the fibers. Thus, this supports greater loads and improves the mechanical properties of the kenaf and hybrid composites.

2 February 2021 in Materials
Verified
Journal Article
Open access
PDF file
AJAidah Jumahat
Aidah Jumahat
AJAidah Jumahat
Aidah Jumahat
Mohammad JawaidMohammad Jawaid
Mohammad Jawaid
Napisah SapiaiNapisah Sapiai
Napisah Sapiai
Alcides LeaoAlcides Leao
Alcides Leao
Basalt fibre is a promising mineral fibre that has high potential to replace synthetic based glass fibre in today’s stringent environmental concern. In this study, friction and wear characteristics of glass and basalt fibres reinforced epoxy composites were studied and comparatively evaluated at two test stages. The first stage was conducted at fixed load, speed and distance under three different conditions; adhesive, abrasive and erosive wear, wherein each composite specimens slide against steel, silicon carbide, and sand mixtures, respectively. The second stage was conducted involving different types of adhesive sliding motions against steel counterpart; unidirectional and reciprocating motion, with the former varied at pressure—velocity (PV) factor; 0.23 MPa·m/s and 0.93 MPa·m/s, while the latter varied at counterpart’s configuration; ball-on-flat (B-O-F) and cylinder-on-flat (C-O-F). It was found that friction and wear properties of composites are highly dependent on test conditions. Under 10 km test run, Basalt fibre reinforced polymer (BFRP) composite has better wear resistance against erosive sand compared to Glass fibre reinforced polymer (GFRP) composite. In second stage, BFRP composite showed better wear performance than GFRP composite under high PV of unidirectional sliding test and under B-O-F configuration of reciprocating sliding test. BFRP composite also exhibited better friction properties than GFRP composite under C-O-F configuration, although its specific wear rate was lower. In scanning electron microscopy examination, different types of wear mechanisms were revealed in each of the test conducted.

29 October 2020 in Polymers
Verified
Journal Article
Open access
PDF file
Napisah SapiaiNapisah Sapiai
Napisah Sapiai
AJAidah Jumahat
Aidah Jumahat
Mohammad JawaidMohammad Jawaid
Mohammad Jawaid
Anish KhanAnish Khan
Anish Khan
The aim of this study is to evaluate the effect of surface treated multi wall carbon nanotubes (MWCNTs) on compressive properties of the unidirectional (UD) kenaf and hybrid woven glass/UD kenaf fibre reinforced polymer composites. The MWCNTs were first treated using concentrated acid (a mix of H2SO4 and HNO3) and silane (three-aminoprophyltriethoxysilane) in order to improve the dispersion within the epoxy matrix using a high shear roll milling technique. In this study, nanomodified epoxies were prepared using 0.5, 0.75 and 1.0 wt % of pristine MWCNT (PCNT), acid treated MWCNT (ACNT) and silane treated MWCNT (SCNT). These nanomodified epoxies were then used for the fabrication of kenaf and hybrid composites using combination of filament winding and resin impregnation. The uniaxial compression test was conducted using a universal testing machine according to the ASTM D3410 standard. The morphology of fractured samples was observed and analysed using scanning electron microscopy (SEM) in order to evaluate the failure behaviour and mechanisms involved during compression. It was found that the addition of treated MWCNT (ACNT and SCNT) improved the compressive properties of kenaf and hybrid composites as compared to those of untreated-MWCNT (PCNT). The addition of 1.0 wt % of SCNT exhibited good compressive properties in both kenaf and hybrid composite systems. The compressive modulus and strength increased by 73.25% and 20.15%, respectively, for composites made of 1.0 wt % SCNT and Kenaf (1.0SCNT/K). For the hybrid composites, the compressive modulus and strength increased by 21.18% and 7.73% for composites made of 1.0 wt % SCNT filled G/K composites (1.0SCNT/G/K).

8 January 2021 in Processes
Verified
Journal Article
Open access
PDF file
Napisah SapiaiNapisah Sapiai
Napisah Sapiai
AJAidah Jumahat
Aidah Jumahat
Mohammad JawaidMohammad Jawaid
Mohammad Jawaid
Carlo SantulliCarlo Santulli
Carlo Santulli
Kenaf (Hibiscus Cannabinus) fibers have received significant attention for replacing the usage of synthetic fibers, especially glass fiber, in the fabrication of fiber-reinforced polymer (FRP) composites. The aim of this research was to study the change in wear behavior of kenaf-epoxy fiber composites by filling them with multiwall carbon nanotubes (MWCNT). In particular, the effect of untreated MWCNT (PMWCNT), acid-treated MWCNT (AMWCNT), and silane-treated MWCNT (SMWCNT) was studied, using three different MWCNT loadings, i.e., 0.5, 0.75, and 1 wt.%. The abrasive wear test was conducted to measure the wear properties of the composites. A thermal infrared camera was also used to measure the punctual contact temperature during the abrasive wear test, while the abraded surfaces were analyzed using the stereomicroscope. Starting from the considerable reduction of wear rate with the introduction of kenaf fibers, it was observed that PMWCNT provided some further, yet modest, reduction of wear rate only at the higher loadings. In contrast, the inclusion of AMWCNT proved to increase the specific wear rate of the epoxy-kenaf composites, an effect worsened at higher loadings. This may be due to the weakened interfacial bonding between the AMWCNT and epoxy. On the other hand, the presence of SMWCNT improved the interfacial bonding between CNT and epoxy, as shown by an increase in contact temperature. However, the increase in bonding strength was stipulated to have caused the rougher worn debris, thus inducing a three-body abrasive wear effect.


8 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Napisah SapiaiNapisah Sapiai
Napisah Sapiai
AJAidah Jumahat
Aidah Jumahat
Mohammad JawaidMohammad Jawaid
Mohammad Jawaid
ZAZin Abu
Zin Abu
Mochamad ChalidMochamad Chalid
Mochamad Chalid
The granite processing industry generates large amounts of bottom granite dust waste every day. After the drying and heating process of concrete mixture production, the granite dust is blown and collected in the filtering nozzle. This very fine particle granite dry fly dust, with a particle size maximum distribution of 500 μm, can easily be blown away by wind and cause serious environmental impacts. The use of this waste material would be an effective way to reduce such impacts. Therefore, this paper presents an experimental study on the potential of granite dust as a filler in enhancing the mechanical performance of a hybrid basalt/glass (WB/GCSM) composite. The unhole and open hole tensile (UHT and OHT) properties, low velocity impact (LVI) properties, quasi-static indentations (QSI) properties, flexural properties, interlaminar shear stress (ILSS) properties, and morphology of the developed WB/GCSM composites were evaluated. To meet the objective of this study, composite specimens were produced using 1.5–60 μm granite fly dust at three (3) different loadings (1, 3 and 5 wt%). This granite fly dust was incorporated into polyurethane resin using a mechanical stirring technique. The production of FRP laminates then completed using a hand lay-up and vacuum bagging technique. Four types of the WB/GCSM composites systems, i.e., [WB/GCSM], [WB/GCSM/1GD], [WB/GCSM/3GD] and [WB/GCSM/5GD] were fabricated and compared. The analysis results for the mechanical tests revealed that the incorporation of granite dust of up to 3 wt% had increased the UHT, OHT, LVI, QSI, flexural and ILSS properties of all WB/GCSM composites systems. Higher levels of damage tolerance in UHT and OHT tests, and increased ductility index in the LVI test were obtained when granite dust was added up to 5 wt%. However, a remarkable improvement in all mechanical properties was noticed for [WB/GCSM/1GD], which recorded the highest mechanical performance among all WB/GCSM composite systems.