An A‑ and B‑site substitutional study of SrFeO3−δ perovskites (A’xA1−xB’yB1−yO3−δ, where A = Sr and B = Fe) was performed for a two‑step solar thermochemical air separation cycle. The cycle steps encompass (1) the thermal reduction of A’xSr1−xB’yFe1−yO3−δ driven by concentrated solar irradiation and (2) the oxidation of A’xSr1−xB’yFe1−yO3−δ in air to remove O2, leaving N2. The oxidized A’xSr1−xB’yFe1−yO3−δ is recycled back to the first step to complete the cycle, resulting in the separation of N2 from air and concentrated solar irradiation. A-site substitution fractions between 0 ≤ x ≤ 0.2 were examined for A’ = Ba, Ca, and La. B-site substitution fractions between 0 ≤ y ≤ 0.2 were examined for B’ = Cr, Cu, Co, and Mn. Samples were prepared with a modified Pechini method and characterized with X-ray diffractometry. The mass changes and deviations from stoichiometry were evaluated with thermogravimetry in three screenings with temperature- and O2 pressure-swings between 573 and 1473 K and 20% O2/Ar and 100% Ar at 1 bar, respectively. A’ = Ba or La and B’ = Co resulted in the most improved redox capacities amongst temperature- and O2 pressure-swing experiments.
H2O transport through a packed bed of Johnson Space Center number 1A (JSC-1A) lunar regolith simulant was examined at relevant temperatures and pressures for in-situ resource utilization (ISRU) on the Moon. Experimentation was conducted over a range of pressures from 50 to 2065 Pa at ∼350 K, corresponding to Knudsen numbers of 0.3 < Kn < 11. Pressure and temperature conditions were relevant toward ISRU technologies. A piecewise function was used to evaluate transition and Knudsen regime flows. The piecewise model utilized a Knudsen number that predicted the transition point between advective and Knudsen flows. A transition Knudsen number of 1.66 ± 0.61 and a tortuosity shape parameter of 0.736 ± 0.13 were determined from non-linear regression, and Knudsen diffusivities of 10.62 cm2·s−1, 10.40 cm2·s−1, and 9.04 cm2·s−1 for packed beds of JSC-1A with porosities of 0.388, 0.385, and 0.365, respectively. The experimental measurements, methodology, and modeling provide useful information for ISRU technologies involving the transport of volatiles (e.g., thermal extraction of H2O).