An A‑ and B‑site substitutional study of SrFeO3−δ perovskites (A’xA1−xB’yB1−yO3−δ, where A = Sr and B = Fe) was performed for a two‑step solar thermochemical air separation cycle. The cycle steps encompass (1) the thermal reduction of A’xSr1−xB’yFe1−yO3−δ driven by concentrated solar irradiation and (2) the oxidation of A’xSr1−xB’yFe1−yO3−δ in air to remove O2, leaving N2. The oxidized A’xSr1−xB’yFe1−yO3−δ is recycled back to the first step to complete the cycle, resulting in the separation of N2 from air and concentrated solar irradiation. A-site substitution fractions between 0 ≤ x ≤ 0.2 were examined for A’ = Ba, Ca, and La. B-site substitution fractions between 0 ≤ y ≤ 0.2 were examined for B’ = Cr, Cu, Co, and Mn. Samples were prepared with a modified Pechini method and characterized with X-ray diffractometry. The mass changes and deviations from stoichiometry were evaluated with thermogravimetry in three screenings with temperature- and O2 pressure-swings between 573 and 1473 K and 20% O2/Ar and 100% Ar at 1 bar, respectively. A’ = Ba or La and B’ = Co resulted in the most improved redox capacities amongst temperature- and O2 pressure-swing experiments.
27 August 2021 in Physical Chemistry Chemical Physics
Two-step solar thermochemical cycles based on reversible reactions of SrFeO 3−δ and (Ba,La) 0.15 Sr 0.85 FeO 3−δ perovskites were considered for air separation.
Utilizing thermochemical reactions for thermal energy storage and solar fuel production has been an emerging research topic. Thermal transport properties of the materials are an important parameter that can determine the kinetics and efficiency of thermochemical reactions. With the increasing number of new thermochemical materials (TCMs); however, there is a lack of reliable techniques to monitor the thermal transport property of the materials and their changes as a function of reactions in real time. In this work, we report the in situ monitoring of thermochemical reactions using modulated photothermal radiometry (MPR). The thermal conductivities of two TCMs, namely, calcium hydroxide (Ca(OH)2) and Ba0.15Sr0.85FeO3−δ (BSF1585), were measured as a function of temperature and time using the MPR technique. The measured thermal conductivities were correlated to the reaction. The work has two significant contributions to the research communities. First, it provides a non-invasive diagnostic tool for monitoring the thermal transport properties of TCMs that can potentially be a high-throughput measurement technique conducive to optimizing TCMs, reactors, and related thermal systems. Second, for TCMs that show observable changes in thermal transport properties, a correlation between the measured thermal conductivity and the conversion fraction of the reaction can be established for monitoring the reaction kinetics based on thermal characterization.
Thermodynamic characterization is essential to design reduction-oxidation (redox) cycles for solar chemistry. Equilibrium reduction extent defines the chemical state of the redox material for given temperatures, pressures, and gas environments. Reaction enthalpies and entropies determine redox favorability and heat input/output for the cycle. Only once these are defined may