Seongphil Woo

Mr. Seongphil Woo

Korea Aerospace Research Institute, Daejeon, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 November 2020 in Energies
Verified
Journal Article
Open access
PDF file
SWSeongphil Woo
Seongphil Woo
JLJungho Lee
Jungho Lee
Yeoungmin HanYeoungmin Han
Yeoungmin Han
YYYoungbin Yoon
Youngbin Yoon
The effects of the momentum-flux ratio of propellant upon the combustion efficiency of a gas-centered-swirl-coaxial (GCSC) injector used in the combustion chamber of a full-scale 9-tonf staged-combustion-cycle engine were studied experimentally. In the combustion experiment, liquid oxygen was used as an oxidizer, and kerosene was used as fuel. The liquid oxygen and kerosene burned in the preburner drive the turbine of the turbopump under the oxidizer-rich hot-gas condition before flowing into the GCSC injector of the combustion chamber. The oxidizer-rich hot gas is mixed with liquid kerosene passed through combustion chamber’s cooling channel at the injector outlet. This mixture has a dimensionless momentum-flux ratio that depends upon the dispensing speed of the two fluids. Combustion tests were performed under varying mixture ratios and combustion pressures for different injector shapes and numbers of injectors, and the characteristic velocities and performance efficiencies of the combustion were compared. It was found that, for 61 gas-centered swirl-coaxial injectors, as the moment flux ratio increased from 9 to 23, the combustion-characteristic velocity increased linearly and the performance efficiency increased from 0.904 to 0.938. In addition, excellent combustion efficiency was observed when the combustion chamber had a large number of injectors at the same momentum-flux ratio.

10 March 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
SWSeongphil Woo
Seongphil Woo
JLJungho Lee
Jungho Lee
ILIngyu Lee
Ingyu Lee
SKSeunghan Kim
Seunghan Kim
Yeoungmin HanYeoungmin Han
Yeoungmin Han
YYYoungbin Yoon
Youngbin Yoon
The momentum flux ratio (MFR) significantly affects the mixing characteristics and combustion efficiency of propellants in rocket engine injectors. The spray characteristics of three gas-centered swirl-coaxial injectors used in a full-scale combustion test were investigated according to the change in the momentum flux ratio. The difference in combustion efficiency was analyzed through the comparison with combustion test results using spray visualization and quantification. The spray cross-sectional shape and droplet distribution were measured using a structured laser illumination planar imaging technique. As the swirl effect was more apparent at a low MFR, the flow rate of the liquid that was sprayed outside was high. The flow rate of the liquid sprayed around the gas injection increased with the MFR. The Sauter mean diameter (SMD) of each injector liquid spray was obtained using the laser shadow imaging method. The SMD decreased as the MFR of all injector types increased, and the injector with a high liquid flow rate and small SMD injected towards the gas center exhibited higher combustion efficiency than the injector with a dominant liquid spray and the large SMD at a large injection angle. The outcomes of the study could help contribute to the increase in the combustion efficiency of the full-scale staged combustion cycle engine combustor.

8 March 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
JLJungho Lee
Jungho Lee
ILIngyu Lee
Ingyu Lee
SWSeongphil Woo
Seongphil Woo
Yeoungmin HanYeoungmin Han
Yeoungmin Han
YYYoungbin Yoon
Youngbin Yoon
The spray and combustion characteristics of a gas-centered swirl coaxial (GCSC) injector used in oxidizer-rich staged combustion cycle engines were analyzed. The study focused on varying the recess ratio, presence of gas swirl, and swirl direction to improve injector performance. The impact of the recess ratio was assessed by increasing it for gas jet-type injectors with varying momentum ratios. Gas-swirl effects were studied by comparing injectors with and without swirl against a baseline of a low recess ratio gas injection. In atmospheric pressure-spray experiments, injector performance was assessed using backlight photography, cross-sectional imaging with a structured laser illumination planar imaging technique (SLIPI), and droplet analysis using ParticleMaster. Increasing the recess ratio led to reduced spray angle and droplet size, and trends of gas swirl-type injectors were similar to those of high recess ratio gas jet-type injectors. Combustion tests involved fabricating combustion chamber heads equipped with identical injectors, varying only the injector type. Oxidizer-rich combustion gas, produced by a pre-burner, and kerosene served as propellants. Combustion characteristics, including characteristic velocity, combustion efficiency, and heat flux, were evaluated. Elevated recess ratios correlated with increased characteristic velocity and reduced differences in the momentum–flux ratios of injectors. However, increasing the recess ratio yielded diminishing returns on combustion efficiency enhancement beyond a certain threshold. Gas swirling did not augment characteristic velocity but notably influenced heat flux distribution. The trends observed in spray tests were related to combustion characteristics regarding heat flux and combustion efficiency. Additionally, it was possible to estimate changes in the location and shape of the flame according to the characteristics of the injector.

1 August 2019 in Journal of the Korean Society of Propulsion Engineers
Verified
Journal Article
Open access
CKChae-Hyoung Kim
Chae-Hyoung Kim
JLJungho Lee
Jungho Lee
SWSeongphil Woo
Seongphil Woo
YSYounseok So
Younseok So
SYSeungJae Yi
SeungJae Yi
JKJin-Han Kim
Jin-Han Kim

1 June 2018 in Journal of the Korean Society of Propulsion Engineers
Verified
Journal Article
Open access
CKChae-Hyoung Kim
Chae-Hyoung Kim
YHYeoung Min Han
Yeoung Min Han
NCNamkyung Cho
Namkyung Cho
SKSeung-Han Kim
Seung-Han Kim
BYByungil Yu
Byungil Yu
JKJin-Han Kim
Jin-Han Kim

1 August 2018 in Journal of the Korean Society of Propulsion Engineers
Verified
Journal Article
Open access
CHChanghwan Hwang
Changhwan Hwang
KLKwangjin Lee
Kwangjin Lee
SWSeongphil Woo
Seongphil Woo
JIJi-Hyuk Im
Ji-Hyuk Im
JJJunsu Jeon
Junsu Jeon
YHYeoungmin Han
Yeoungmin Han