Ingyu Lee

Mr. Ingyu Lee

Department of Aerospace Engineering, Seoul National University, Seoul, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2024 in International Journal of Aeronautical and Space Sciences
Verified
Journal Article
Open access
PDF file
ILIngyu Lee
Ingyu Lee
DSDaewoong Shim
Daewoong Shim
IKInho Kim
Inho Kim
YYYoungbin Yoon
Youngbin Yoon
Due to the structural characteristics of the pintle injector, a recirculation zone is generated under the pintle, so the pintle tip is directly exposed to a high-temperature environment. Therefore, the cooling technique and protective coating on the pintle tip are essential for improving the reusability and durability of the pintle injector. Although various cooling methods are known, this study applied a forced flow passage cooling method by adding internal structures called inserts to the pintle injector. The characteristics of the insert were analyzed experimentally and numerically based on change of its area ratio. When the internal flow changes, the spray angle, droplet size, and cooling performance also change in accordance with an increase in the insert’s central area. When the insert structure is installed in the pintle post, upward flow may occur, which can worsen the spray angle and droplet distribution characteristics. Nevertheless, owing to the insert structure, the surface temperature of the pintle post is reduced dramatically as intended. Thus, an optimal design technique for cooling by changing the area ratio of the first- and second-row slits of the pintle post can be suggested to overcome the limitations of the insert structure. The results of this study will be helpful in understanding the spray characteristics of the insert structure and optimize the design of cooling channels for reusable pintle injectors in the future.

23 December 2023 in Acta Astronautica
Verified
Journal Article
Closed access
JLJungho Lee
Jungho Lee
SWSeongphil Woo
Seongphil Woo
ILIngyu Lee
Ingyu Lee
YHYeoungmin Han
Yeoungmin Han
YYYoungbin Yoon
Youngbin Yoon

10 March 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
SWSeongphil Woo
Seongphil Woo
JLJungho Lee
Jungho Lee
ILIngyu Lee
Ingyu Lee
SKSeunghan Kim
Seunghan Kim
Yeoungmin HanYeoungmin Han
Yeoungmin Han
YYYoungbin Yoon
Youngbin Yoon
The momentum flux ratio (MFR) significantly affects the mixing characteristics and combustion efficiency of propellants in rocket engine injectors. The spray characteristics of three gas-centered swirl-coaxial injectors used in a full-scale combustion test were investigated according to the change in the momentum flux ratio. The difference in combustion efficiency was analyzed through the comparison with combustion test results using spray visualization and quantification. The spray cross-sectional shape and droplet distribution were measured using a structured laser illumination planar imaging technique. As the swirl effect was more apparent at a low MFR, the flow rate of the liquid that was sprayed outside was high. The flow rate of the liquid sprayed around the gas injection increased with the MFR. The Sauter mean diameter (SMD) of each injector liquid spray was obtained using the laser shadow imaging method. The SMD decreased as the MFR of all injector types increased, and the injector with a high liquid flow rate and small SMD injected towards the gas center exhibited higher combustion efficiency than the injector with a dominant liquid spray and the large SMD at a large injection angle. The outcomes of the study could help contribute to the increase in the combustion efficiency of the full-scale staged combustion cycle engine combustor.

8 March 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
JLJungho Lee
Jungho Lee
ILIngyu Lee
Ingyu Lee
SWSeongphil Woo
Seongphil Woo
Yeoungmin HanYeoungmin Han
Yeoungmin Han
YYYoungbin Yoon
Youngbin Yoon
The spray and combustion characteristics of a gas-centered swirl coaxial (GCSC) injector used in oxidizer-rich staged combustion cycle engines were analyzed. The study focused on varying the recess ratio, presence of gas swirl, and swirl direction to improve injector performance. The impact of the recess ratio was assessed by increasing it for gas jet-type injectors with varying momentum ratios. Gas-swirl effects were studied by comparing injectors with and without swirl against a baseline of a low recess ratio gas injection. In atmospheric pressure-spray experiments, injector performance was assessed using backlight photography, cross-sectional imaging with a structured laser illumination planar imaging technique (SLIPI), and droplet analysis using ParticleMaster. Increasing the recess ratio led to reduced spray angle and droplet size, and trends of gas swirl-type injectors were similar to those of high recess ratio gas jet-type injectors. Combustion tests involved fabricating combustion chamber heads equipped with identical injectors, varying only the injector type. Oxidizer-rich combustion gas, produced by a pre-burner, and kerosene served as propellants. Combustion characteristics, including characteristic velocity, combustion efficiency, and heat flux, were evaluated. Elevated recess ratios correlated with increased characteristic velocity and reduced differences in the momentum–flux ratios of injectors. However, increasing the recess ratio yielded diminishing returns on combustion efficiency enhancement beyond a certain threshold. Gas swirling did not augment characteristic velocity but notably influenced heat flux distribution. The trends observed in spray tests were related to combustion characteristics regarding heat flux and combustion efficiency. Additionally, it was possible to estimate changes in the location and shape of the flame according to the characteristics of the injector.