Mengxuan Ye

Dr. Mengxuan Ye


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
GPGuangzhao Peng
Guangzhao Peng
WWWeidong Wang
Weidong Wang
XHXiangdong Huang
Xiangdong Huang
SSShiwen Shen
Shiwen Shen
MYMengxuan Ye
Mengxuan Ye
The CRTS I type double-block ballastless track (CRTS I TDBBT) has the advantages of convenient construction and low cost, but it has low crack resistance and the temperature field distribution of the railway on the bridge is uneven and frequently changes, so it is necessary to study the mechanical properties of the CRTS I TDBBT under the load of a temperature field. The temperature field model of the CRTS I TDBBT on the bridge is established by finite element software, the real-time temperature field of the track bed slab is brought into the coupled model as a load, and the variation laws of the temperature stress of the CRTS I TDBBT under different schemes are compared. The temperature gradient in the CRTS I TDBBT track bed slab has the largest fluctuation range, and the positive and negative temperature gradient range can reach 93.34 °C. For the temperature longitudinal stress around the sleeper block of the track bed slab, the edge is the largest; the temperature longitudinal stress is reduced by at most 5.27% after the anti-cracking diagonal bars are added. When the expansion joint is added, the temperature stress can be reduced by up to 80.29%. The fluctuation range of the temperature gradient of the track bed is basically consistent with the fluctuation range of the local air temperature. The huge temperature difference leads to the occurrence of cracks in the track structure, and cracks are more likely to occur at the corners of the sleeper block. The addition of both anti-crack diagonal bars and expansion joints has an anti-crack effect, but the effect of adding expansion joints is better.

7 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
JHJi Hu
Ji Hu
XHXudong Huang
Xudong Huang
MYMengxuan Ye
Mengxuan Ye
ZHZhibin Huang
Zhibin Huang
PMPawinee Markthong
Pawinee Markthong
To meet the transportation requirements of heavy-haul trains, it is necessary to consider the use of prestressed reinforced concrete ballastless tracks. Therefore, the CRTSIII SBT (China Railway Track System III-type slab ballastless track) has been considered for its convenient construction and geometric adjustment. Considering the problems existing in the base plate of CRTSIII SBT in heavy-haul applications, an indoor test and simulation were conducted to explore the cracking phenomenon of the base plate concrete under fatigue load. The reliability of the simulation was verified through the experimental results. A fatigue crack development law of the base plate structure was established. Furthermore, the influence of the load position, the thickness of self-compacting concrete and axle loads on the fatigue damage of the base plate structure were investigated. For the CRTSIII SBT subjected to heavier axle loads, it is appropriate to thicken the self-compacting concrete layer and strengthen the concrete and steel reinforcement at the plate end to reduce fatigue damage and cracks. The research results can serve as a basis for the optimization of the CRTSIII SBT base plate structure in heavy-haul railway applications.

1 November 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
GPGuangzhao Peng
Guangzhao Peng
WGwuji guo
wuji guo
XHXiangdong Huang
Xiangdong Huang
MYMengxuan Ye
Mengxuan Ye
XDXianggang Du
Xianggang Du
With the gradual increase of the cargo weight of heavy-haul trains, the traditional ballasted track with the accumulation of stone and ballast has been unable to meet its structural safety requirements. From the comparison of the three common ballastless tracks in China, it can be seen that the low-vibration track (LVT) has the advantages of reasonable structure, low cost, and easy maintenance. Therefore, the design and research of heavy-haul railways are focused on, and it is urgent to study the applicability of LVT in heavy-haul railways. Method: By improving the slope of the short side of the LVT support block, the support block has a better load bearing capacity, so as to achieve the purpose of bearing a larger axle load. Through 1:1 full-scale model test and finite element simulation, the static mechanical properties of Improved LVT (ILVT) and Traditional LVT (TLVT) are compared and analyzed. Result: Compared with TLVT, ILVT has smaller vertical displacement and track gauge changes when subjected to the same load. The proven and reliable finite element model also shows that ILVT’s load sharing is less affected. In the case of achieving the same deformation, ILVT can withstand greater vertical and lateral loads. Conclusions: Compared with the TLVT, the ILVT design can reduce the vertical displacement of the rail and the supporting block, better control the track subsidence, and improve the driving safety of the LVT. At the same time, ILVT improves the anti-overturning ability of the rail and support block under lateral load, reduces the expansion of the gauge and the lateral spacing of the support block, and improves the stability of the track structure. ILVT can also be considered for the weight of 40t and other large axle load, and has broad application prospects.

31 January 2025 in Sensors
Verified
Journal Article
Open access
PDF file
WGWuji Guo
Wuji Guo
ZZZhiping Zeng
Zhiping Zeng
MYMengxuan Ye
Mengxuan Ye
FLFushan Liu
Fushan Liu
WWWeidong Wang
Weidong Wang
PLPing Li
Ping Li
With the rapid development of urban rail transit, the intensity and impact range of train-induced vibrations are increasing. Investigating the transmission characteristics and attenuation patterns of these vibrations in track structures aids in understanding train-induced environmental vibrations. This study conducted rail impact experiments on a long sleeper integrated slab of a straight section of a subway tunnel. The hammer struck the rail at various positions, and acceleration sensors recorded the responses of the rail, slab, and tunnel. In order to determine the impact force, the vertical wheel–rail force and the vibration response of track structures were measured. Then, the Lance-LC1304B force hammer was selected for the experiment, and the hammer impact force reached 30 kN, the magnitude of which reached the measured wheel–rail force size for the line. Based on the results of the impact tests, the vibration attenuation characteristics of the track structure were analyzed. Accordingly, reference values for the truncation time and truncation distance in the vehicle–track coupled dynamics model’s moving window were provided. By comparing the results of the hammering experiment with the train-induced vibration results, the main excitation frequencies during train operation were determined. These findings provide valuable insights for the development of rail transit systems.

6 June 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
XHXiangdong Huang
Xiangdong Huang
WWWeidong Wang
Weidong Wang
BZBin Zhu
Bin Zhu
ZZZheng Zhang
Zheng Zhang
MYMengxuan Ye
Mengxuan Ye
This paper uses the long-span steel truss slab track as its research subject to analyze the new type of sleeper slab track structure with an experimental method. Firstly, a full-scale model was established in the laboratory to form a “rail–sleeper slab–self-compacting concrete cushion–steel beam” composite structure, and a fatigue test was performed on the track structure. The cyclic load was set up as a sine form with a range between 75 and 375 kN at a 5 Hz interval and 3 × 106 cycles. Based on the test, the performance of the track structure under cyclic train load was studied. Secondly, after every 106 loading cycles, the vertical static loading test and horizontal resistance test of the track structure were carried out to obtain the strain and displacement under different loading cycles. Finally, after 3 × 106 cycles of sine cyclic loading, the horizontal ultimate resistance test of the track structure was carried out to study its horizontal failure mode. The aims of this paper were to verify the applicability of the sleeper slab track, identify the mechanical properties, and determine the unfavorable position. The findings can provide an important reference for the practical use of the sleeper slab track structure.