Stanislav Špirk

Dr. Stanislav Špirk

Faculty of Mechanical Engineering

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
Stanislav ŠpirkStanislav Špirk
Stanislav Špirk
JSJan Spicka
Jan Spicka
JVJan Vychytil
Jan Vychytil
MKMichal Křížek
Michal Křížek
ASAdam Stehlík
Adam Stehlík
The rail industry has been significantly affected by the passive safety technology in the last few years. The tram front-end design must fulfill the new requirements for pedestrian passive safety performance in the near future. The requirements are connected with a newly prepared technical guide “Tramway front end design” prepared by Technical Agency for ropeways and Guided Transport Systems. This paper describes research connected with new tram front-end design safe for pedestrians. The brief description of collision scenario and used human-body model “Virthuman” is provided. The numerical simulations (from field of passive safety) are supported by experiments. The interesting part is the numerical model of the tram windshield experimentally validated here. The results of simulations are discussed at the end of paper.

14 March 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
Stanislav ŠpirkStanislav Špirk
Stanislav Špirk
MKMichal Křížek
Michal Křížek
ŠJŠtěpán Jeníček
Štěpán Jeníček
This contribution is focused on the passive safety of the railway vehicles interiors. The passive safety has become a new area of the rail vehicles design. In the field of rail vehicles interior passive safety the computer simulations are most widely used. The computer simulations must be based on relevant material data. For some common materials (eg. steel, aluminium, etc.) the material data are ascertainable. The interiors of rail vehicles contain quite specific materials frequently. One of the material with more complicated mechanical properties is polyurethane foam (PUR). The aim of this paper is to present validation of material parameters for specific polyurethane foam by experiment. The material properties (for seat made from Elastoflex W 5662 covered with Holdsworth BHLH 31634) will be useful for further simulations.

24 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
Tomas KalinaTomas Kalina
Tomas Kalina
ZCZdenek Chval
Zdenek Chval
FSFrantisek Sedlacek
Frantisek Sedlacek
Stanislav ŠpirkStanislav Špirk
Stanislav Špirk
The aim of this study was to investigate the potential of polymeric cell structures for the production of energy absorbers and to focus on the geometric optimization of polymeric cell structures producible by additive technologies to achieve the required deformation characteristics, high material efficiency and the low weight of the resulting absorber. A detailed analysis of different types of cell structures (different lattice structures and honeycombs) and their properties was performed. Honeycombs, which have been further examined in more detail, are best suited for absorbing large amounts of energy and high levels of material efficiency at known load directions. Honeycombs have the potential to absorb large amounts of energy relative to their low weight and their deformation characteristics have a relatively constant course. Honeycombs have the major disadvantage of an initial peak. However, this peak can be removed by appropriately adjusting the geometry of the honeycomb. Thanks to the possibilities that additive technology allows us, honeycombs with progressive wall thickness have been designed and researched. The output of this study is a detailed analysis of the properties and several design recommendations for the design of a honeycomb with a progressive wall thickness to achieve the required properties.

23 January 2026 in Polymers
Verified
Journal Article
Open access
PDF file
Stanislav ŠpirkStanislav Špirk
Stanislav Špirk
Tomas KalinaTomas Kalina
Tomas Kalina
This study presents the development, calibration, and validation of cohesive zone models (CZMs) for epoxy-based adhesive joints connecting stainless steel and CFRP composites. The objective of this study is to develop and rigorously validate cohesive zone models for epoxy-based adhesive joints between stainless steel and CFRP composites, ensuring their reliability for numerical simulations of structural failure under quasi-static and large-deformation conditions. The work focuses on accurately describing the quasi-static behaviour and failure mechanisms of hybrid adhesive interfaces, which are crucial for multimaterial structures in modern transportation systems. Experimental tests in Mode I (DCB) and Mode II (ENF) configurations were performed to determine the cohesive parameters of the structural adhesive SikaPower 1277. The obtained data were further analysed through analytical formulations and validated numerically using PAM-CRASH. Excellent agreement was achieved between experiments, analytical predictions, and simulations, confirming the reliability of the proposed material definitions under large deformations. The validated models were subsequently implemented in a large-scale numerical simulation of a bus rollover according to UN/ECE Regulation No. 66, demonstrating their applicability to real structural components. The results show that the developed cohesive zone models enable accurate prediction of failure initiation and propagation in adhesive joints between dissimilar materials. These findings provide a robust foundation for the design of lightweight, crashworthy structures in transportation and open new perspectives for integrating epoxy-based adhesives into additively manufactured hybrid metal–composite systems.

1 December 2017 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
Stanislav ŠpirkStanislav Špirk
Stanislav Špirk
This paper describes the conception of vehicle interior which can help decrease the injury risk of unbelted passenger. This paper is primarily aimed to the field of rail vehicles, but the results are useful for more transportation industries. ...

1 February 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
Stanislav ŠpirkStanislav Špirk
Stanislav Špirk
JVJ Vychytil
J Vychytil
Passive safety of rail vehicles is described by two documents. These requirements for structural crashworthiness are covered by EN 15227 standard. The GMRT 2100 standard (currently mandatory in UK) summarizes the requirements for interior safety. The actual legislation deals only with an injury of an average adult male (50 percentile). An assessment of interior passive safety for the wider population (5 and 95 percentile) will be other logical steps (in the near future). This approach is well known from automotive industry. This study identifies the most dangerous factors for child passenger collisions in the interior of a rail vehicle. Virtual simulations, finite element method and multibody simulations are used for that. It is possible to overtake the current trends and to carry out a rail interior safety assessment for children due to the excellent scalability of the VIRTHUMAN model. The data of the vehicle design were obtained from the local producers. The vehicles which are used in this research were developed recently and they are generally used. The injury criteria are used for probability of injury evaluation. Some first recommendations for rail interior design safe for children are provided at the end of this paper.