Current industrial trends bring new challenges in energy absorbing systems. Polymer materials as the traditional packaging materials seem to be promising due to their low weight, structure, and production price. Based on the review, the linear low-density polyethylene (LLDPE) material was identified as the most promising material for absorbing impact energy. The current paper addresses the identification of the material parameters and the development of a constitutive material model to be used in future designs by virtual prototyping. The paper deals with the experimental measurement of the stress-strain relations of linear low-density polyethylene under static and dynamic loading. The quasi-static measurement was realized in two perpendicular principal directions and was supplemented by a test measurement in the 45° direction, i.e., exactly between the principal directions. The quasi-static stress-strain curves were analyzed as an initial step for dynamic strain rate-dependent material behavior. The dynamic response was tested in a drop tower using a spherical impactor hitting a flat material multi-layered specimen at two different energy levels. The strain rate-dependent material model was identified by optimizing the static material response obtained in the dynamic experiments. The material model was validated by the virtual reconstruction of the experiments and by comparing the numerical results to the experimental ones.
The rail industry has been significantly affected by the passive safety technology in the last few years. The tram front-end design must fulfill the new requirements for pedestrian passive safety performance in the near future. The requirements are connected with a newly prepared technical guide “Tramway front end design” prepared by Technical Agency for ropeways and Guided Transport Systems. This paper describes research connected with new tram front-end design safe for pedestrians. The brief description of collision scenario and used human-body model “Virthuman” is provided. The numerical simulations (from field of passive safety) are supported by experiments. The interesting part is the numerical model of the tram windshield experimentally validated here. The results of simulations are discussed at the end of paper.
14 January 2015 in SAE International Journal of Advances and Current Practices in Mobility
The paper contributes to the field of vehicle safety technology by the virtual approach using biomechanical virtual human body models. The goal of the paper is to exploit the previously developed scaling algorithm to create several virtual human models of a given age and body proportions and to assess the impact analysis using the sensitivity approach.Based on a validated reference model, the previously developed scaling algorithm develops virtual human body models for given height, mass, age and gender. Particular body segments are scaled based on the anthropometrical database concerning the body dimensions taking also percentiles into account. The body stiffness is driven by age dependent flexindex.Several virtual models of human bodies representing particular cadavers were generated via the automatic scaling algorithm. The frontal sled test response of three models was successfully compared to the available experimental data previously. Since all the sled tests concerned different seat and loading conditions, the models were further compared by running the same standard sled test. The particular model anthropometry dependent response was compared for the different body statures.
24 March 2014 in SAE International Journal of Advances and Current Practices in Mobility
Traffic accidents cause one of the highest numbers of severe injuries in the whole population. The numbers of deaths or seriously injured citizens prove that traffic accidents and their consequences are still a serious problem to be solved.A lot of effort is devoted to both passive and active safety systems development. The transportation standards usually define safety requirements by regulations (e.g. ECE-R94, 96/79/EC and ECE-R95, 96/27/EC in Europe) with specific dummies for children to be used. The dummies include hardware sensors for monitoring accelerations, loads and other signals and each dummy is developed for a specific scenario, but there are limitations of these dummies, such as only a specific age or calibration just for a specific test. Taking into account that the consequence of a traffic accident is highly influenced by the stature of the body, virtual human body models, including those for children, start to play a significant role because they can be scaled or even personalized towards a particular population or even a particular person.The paper contributes to the field of vehicle safety technology concerning child restraint systems development, assessment and optimization with a virtual numerical approach. The goal of the paper is to exploit the previously developed scaling algorithm to create a virtual model of a six-year-old (6YO) child and to compare its response to the virtual dummy used for child safety in order to propose an automatic scaling process for a population-based vehicle safety assessment.The automatic scaling algorithm developing virtual human body models for a given age and gender is used to create the virtual 6YO child model. The algorithm scales body dimensions and particular segments' mass and the flexibility of the body is driven by flexindex and stiffness scaling.The performance of the automatically developed virtual 6YO child model was tested in frontal and lateral directions. The frontal response was tested with a standard sled test simulation using the standardized AAMA pulse in the frontal direction. The lateral response was tested with a side barrier impact test. The results of both tests were compared to the validated virtual Q6 Child Dummy FE model.The paper shows good performance of the automatic scaling process for developing 6YO virtual model for safety assessment. The automatically developed 6YO child model corresponds well from both the anthropological point of view and performance point of view to the existing validated dummy model.
Objective: The future mobility challenges lead to considering new safety systems to protect vehicle passengers in non-standard and complex seating configurations. The objective of this study is to assess the performance of a brand new safety system called nanobag and to compare it to traditional airbag performance in the frontal sled test scenario. Methods: The nanobag technology is assessed in the frontal crash test scenario and compared with the standard airbag by numerical simulation. The previously identified material model is used to assemble the nanobag numerical model. The paper exploits an existing validated human body model to assess the performance of the nanobag safety system. Using both the new nanobag and the standard airbag, the sled test numerical simulations with the variation of human bodies were performed in 30 km/h and 50 km/h frontal impacts. Results: The sled test results for both the nanobag and the standard airbag based on injury criteria show a good and acceptable performance of the nanobag safety system compared to the traditional airbag. Conclusions: The results show that the nanobag system’s performance is comparable to the standard airbag’s, which means that, thanks to the design, the nanobag safety system has high potential and an extended application for multi-directional protection against impact.
This paper is focused on the field of traffic passive safety. The main point of this research is to reduce the severity of the consequences of a collision between tramway and pedestrian. The collision scenario is based on statistical data of local research in Czech Republic. For the first assessment of influence of tram geometry, it is necessary to investigate in the numerical simulations with different shapes of tram face. For this purpose the Multibody simulations are carried. Then the detail finite element simulations are prepared. The explicit finite element code Virtual Performance solution (VPS) and human body model Virthuman where used for the simulations. The approval process and standards were prepared for trams in last years (e.g Technical Guide Tramway front-end design) and already today it is visible significant contrast with automotive industry. The main complications in design process are connected with other requirements for tram front-end construction. These requirements are from other passive and active safety field (requirement for collision tram-tram, collision tram-road vehicle, active safety eg. visibility) and from another fields (durability, design, aerodynamics). The new construction safe for pedestrian is different in more ways. Therefore it is difficult to propagate the changes in construction.