Teresa Pàmies

Dr. Teresa Pàmies


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2014 in Applied Acoustics
Verified
Journal Article
Closed access
TPTeresa Pàmies
Teresa Pàmies
JRJ. Romeu
J. Romeu
MGM. Genescà
M. Genescà
Robert ArcosRobert Arcos
Robert Arcos

4 September 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SSShahin Sohrabi
Shahin Sohrabi
TPTeresa Pàmies
Teresa Pàmies
JGJordi Romeu Garbí
Jordi Romeu Garbí
Barriers are increasingly used to protect the pedestrian and neighboring buildings from construction noise activities. This study aims to investigate the suitability of applying active noise control on barriers in a construction site to protect the street area and neighboring buildings. Transducers that are simulated in this work are close to the barrier, and their optimal positions are defined in such a way that the control system has the maximum performance at the neighboring areas close to the construction sites. To begin with, the suitable location of the control sources is found when the total squared pressure is minimized at the positions of noise receivers. The suitable location of the error sensors is, then, found when the control sources are fixed at the position of the previous step and the total squared pressure is minimized at the error sensors. The best location for the error sensors is defined when the maximum reduction is achieved in the target area. It is observed that suitable positions for the transducers depend on the location of target areas for noise control, the position of the noise source, and its operating frequency. In this investigation, a unique configuration is proposed for the transducers that achieves a comparable reduction both at the street area and the neighboring buildings, simultaneously. The results show that the active noise barrier with a height of 2.5 m can achieve an extra insertion loss in the street zone, varies from 9.3 to 16.4 dB (in comparison with passive noise barrier) when the distance of the noise source from the barrier changes in the range of 7 to 1 m, respectively. Those values are of the same order for the passive noise attenuation. Furthermore, similar results are achieved when attempting to cancel the shadow zone of a façade 15 m away from the barrier.

25 January 2020 in Journal of Vibration and Acoustics
Verified
Journal Article
Closed access
PDF file
DRDavid Roca
David Roca
TPTeresa Pàmies
Teresa Pàmies
JCJuan Cante
Juan Cante
OLO. Lloberas-Valls
O. Lloberas-Valls
JOJavier Oliver
Javier Oliver
The so-called locally resonant acoustic metamaterials (LRAMs) are a new kind of artificially engineered materials capable of attenuating acoustic waves. As the name suggests, this phenomenon occurs in the vicinity of internal frequencies of the material structure and can give rise to acoustic bandgaps. One possible way to achieve this is by considering periodic arrangements of a certain topology (unit cell), smaller in size than the characteristic wavelength. In this context, a computational model based on a homogenization framework has been developed from which one can obtain the aforementioned resonance frequencies for a given LRAM unit cell design in the sub-wavelength regime, which is suitable for low-frequency applications. Aiming at validating both the proposed numerical model and the local resonance phenomena responsible for the attenuation capabilities of such materials, a 3D-printed prototype consisting of a plate with a well selected LRAM unit cell design has been built and its acoustic response to normal incident waves in the range between 500 and 2000 Hz has been tested in an impedance tube. The results demonstrate the attenuating capabilities of the proposed design in the targeted frequency range for normal incident sound pressure waves and also establish the proposed formulation as the fundamental base for the computational design of 3D-printed LRAM-based structures.

4 February 2023 in Journal of Sound and Vibration
Verified
Journal Article
Open access
JFJavad Fakhraei
Javad Fakhraei
Robert ArcosRobert Arcos
Robert Arcos
TPTeresa Pàmies
Teresa Pàmies
Hassan LiraviHassan Liravi
Hassan Liravi
JRJordi Romeu
Jordi Romeu

1 July 2011 in The Journal of the Acoustical Society of America
Verified
Journal Article
Closed access
PDF file
TPTeresa Pàmies
Teresa Pàmies
JRJ. Romeu
J. Romeu
MGM. Genescà
M. Genescà
MBManso Andreu Balastegui
Manso Andreu Balastegui
This paper investigates both theoretically and experimentally the sound radiation from an aperture placed in an enclosure wall for the particular case of low modal sound field. The incidence field is composed of the enclosed sound field, which is calculated using the theoretical modal model presented. The transmitted sound is calculated by the Rayleigh radiation equation after continuity conditions have been applied in the aperture plane, assuming the condition of a thin wall. The model is experimentally validated by measuring the directivity and sound pressure radiated from an aperture in the side of a rectangular box. Because the walls of the enclosure are not rigid, an experimental procedure to determine its admittance is also presented. The experiments have been carried out for the first four modes of the enclosed sound field, and good agreement is found between the theoretical and experimental results. These results indicate that the admittance of the aperture, its radiation efficiency, and its directivity are all functions of the predominant mode shape, and the frequency, as well as the location and shape, of the aperture relative to the predominant enclosed mode shape.

1 January 2017 in Engineering Applications of Computational Fluid Mechanics
Verified
Journal Article
Open access
VGV.M. Garcia-Alcaide
V.M. Garcia-Alcaide
SPSergi Palleja-Cabre
Sergi Palleja-Cabre
Robert CastillaRobert Castilla
Robert Castilla
Pedro Javier Gamez-MonteroPedro Javier Gamez-Montero
Pedro Javier Gamez-Montero
JRJ. Romeu
J. Romeu
NMN. Milan
N. Milan
The aim of this paper is to study the aerodynamics phenomena of a bass-reflex port that causes noise in the audible frequency range. After discarding structural and mechanical vibration issues, the hypothesis considered is that vortex shedding is the source of the noise. Experimental and numerical evidences of the vortex, an analysis of its noise and the similarities between real and simulated performance are presented. The numerically simulated cases with the original geometry are excited at different frequencies and with modifications of the port geometry. Likewise, the internal performance of an enclosure with a closed port was simulated. The simulations have been performed with axisymmetrical geometries using the open-source OpenFOAM® toolbox. Moreover, experimental measurements were carried out. First, acoustic signal experiments were done to analyse the response of the bass-reflex ports. Secondly, a structure vibration measurement was conducted in order to exclude the cabinet structure vibration as a source of the noise in question. A good agreement was found between numerical and experimental results, especially in the frequency band of the detected noise, i.e. the 1000–1500 Hz range. Despite no remarkable improvement being made with the geometry changes explored, the presented CFD approach has proved a useful and cost-effective tool to address this kind of phenomenon.