In recent years the use of UAVs (Unmanned aerial vehicles) have proliferated in the civil sector for purposes such as search and rescue, remote sensing or real-time monitoring of road traffic, among others. In the architecture, engineering and construction fields (AEC) UAVs have demonstrated to be an ideal technology due to their optimal performance in terms of time, precision, safety and cost. Given the rapid growth of interest in this technology, this research presents a critical review of the literature on the use of UAVs in architecture and urbanism to define the most widely used techniques and delimit the fields of application based on the experimentation published by the scientific community. A scientific mapping was carried out in two stages using the VOSviewerTM software: a scientometric and a bibliometric analysis. This technique allowed us to analyse a large body of literature and bibliographic data to obtain trends, patterns and directions of this domain of knowledge. Then, a literature review was presented, highlighting the relevant information identified in the previous analysis. The fields of application of UAVs were delimited and the most commonly used payload types and the most appropriate post-processing techniques were specified, depending on the aerial mission objective. The fields of application identified included different techniques related to the generation of 3D models, land mapping, construction site monitoring, building surveying to detect structural damage and energy losses and urban remote sensing. The literature review showed that UAVs provide a useful multi-tasking tool at any stage of an architectural project. These techniques can be applied to buildings or public spaces from the design and construction processes when the project is initiated to the later stages of maintenance and inspection of the building during its life cycle.
The growing concern about global climate change extends to different professional sectors. In the building industry, the energy consumption of buildings becomes a factor susceptible to change due to the direct relationship between the outside temperature and the energy needed to cool and heat the internal space. This document aims to estimate the energy consumption of a Minimum Energy Building (MEB) in different scenarios—past, present, and future—in the subtropical climate typical of seaside cities in Southern Spain. The building energy consumption has been predicted using dynamic building energy simulation software tools. Projected climate data were obtained in four time periods (Historical, the 2020s, 2050s, and 2080s), based on four emission scenarios defined by the Intergovernmental Panel on Climate Change (IPCC): B1, B2, A2, A1F1. This methodology has been mathematically complemented to obtain data in closer time frames (2025 and 2030). In addition, different mitigation strategies have been proposed to counteract the impact of climate change in the distant future. The different energy simulations carried on show clearly future trends of growth in total building energy consumption and how current building designers could be underestimating the problem of air conditioning needs in the subtropical zone. Electricity demand for heating is expected to decrease almost completely, while electricity demand for cooling increases considerably. The changes predicted are significant in all scenarios and periods, concluding an increase of between 28–51% in total primary energy consumption during the building life cycle. The proposed mitigation strategies show improvements in energy demands in a range of 11–14% and they could be considered in the initial stages of project design or incorporated in the future as the impact of climate change becomes more pronounced.
The construction sector is a great contributor to global warming both in new and existing buildings. Minimum energy buildings (MEBs) demand as little energy as possible, with an optimized architectural design, which includes passive solutions. In addition, these buildings consume as low energy as possible introducing efficient facilities. Finally, they produce renewable energy on-site to become zero energy buildings (ZEBs) or even plus zero energy buildings (+ZEB). In this paper, a deep analysis of the energy use and renewable energy production of a social dwelling was carried out based on data measurements. Unfortunately, in residential buildings, most renewable energy production occurs at a different time than energy demand. Furthermore, energy storage batteries for these facilities are expensive and require significant maintenance. The present research proposes a strategy, which involves rescheduling energy demand by changing the habits of the occupants in terms of domestic hot water (DHW) consumption, cooking, and washing. Rescheduling these three electric circuits increases the usability of the renewable energy produced on-site, reducing the misused energy from 52.84% to 25.14%, as well as decreasing electricity costs by 58.46%.
In order to improve urban thermal comfort in a public space located in a subtropical climate, Huelva (Spain), the thermal radiation - that is usually synthesised in terms of mean radiant temperature (Tmrt) - was evaluated.Two validated methods of measuring Tmrt as thermography and computational simulation were used. This paper presents a new method for assessing the measurement of radiant heat transfer in a pedestrian urban space using an UAV equipped with a thermal infrared device. From the surface temperatures, the Tmrt value was estimated at 20 points distributed in the pedestrian space at three times on a typical summer day. A microclimate urban simulation was carried out using ENVI-met v5. The comparative analysis of the measured and simulated dataset verified the applicability of aerial thermography for this purpose (with R2 values of 0.98 for the data set and 0.8 for the data of each time period). To conclude, based on the factors that had the greatest influence on the calculated Tmrt: material properties, vegetation and urban geometry (such as orientation or height-to-width ratio), new strategies were proposed to improve urban thermal comfort and to make cities more sustainable.