Antonio Sanchez Cordero

Mr. Antonio Sanchez Cordero

University of Huelva
+1
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2019 in Energies
Verified
Journal Article
Open access
PDF file
ACAntonio Sanchez Cordero
Antonio Sanchez Cordero
Sergio MelgarSergio Melgar
Sergio Melgar
JAJosé Manuel Andújar
José Manuel Andújar
Increasing problems regarding pollution and climate change have long been demonstrated by scientific evidence. An important portion of carbon emissions are produced by the building sector. These emissions are directly related not only to the building’s energy consumption, but also other building attributes affecting the construction and operation of existing buildings: materials selection, waste management, transportation, water consumption, and others. To help reduce these emissions, several green building rating system (GBRSs) have appeared during the last years. This has made it difficult for stakeholders to identify which GBRSs could be more suitable to a specific project. The heterogeneity of the GRBS scenario requires the creation of a transparent and robust indicator framework that can be used in any country within the European Union (EU), which is a common EU framework of core sustainability indicators for office and residential buildings Level(s) with the goal to provide a solid structure for building sustainability certification across all countries of the EU. This paper provides a comprehensive review of the most common GBRSs within the EU: Building Research Establishment Assessment Method (BREEAM), Deutsche Gesellschaft für Nachhaltiges Bauen (DGNB), Haute Qualité Environnementale (HQE), and Leadership in Energy & Environmental Design (LEED), and a bottom up comparison of the influence in the final score produced by the indicators stated by Level(s). The indicators studied show a different influence of Level(s) indicators on every GBRS, where LEED and BREEAM were most affected while HQE and DGNB were less so. This paper demonstrates the heterogeneity of current GRBSs in the EU scenario and the difference between sustainability assessments, where DGNB seems to be more aligned to the current EU framework. Finally, the paper concludes with the need to work to achieve alignment between the GBRS and Level(s).

25 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MVMarta Videras
Marta Videras
Sergio MelgarSergio Melgar
Sergio Melgar
ACAntonio Sanchez Cordero
Antonio Sanchez Cordero
JAJosé Manuel Andújar
José Manuel Andújar
In recent years the use of UAVs (Unmanned aerial vehicles) have proliferated in the civil sector for purposes such as search and rescue, remote sensing or real-time monitoring of road traffic, among others. In the architecture, engineering and construction fields (AEC) UAVs have demonstrated to be an ideal technology due to their optimal performance in terms of time, precision, safety and cost. Given the rapid growth of interest in this technology, this research presents a critical review of the literature on the use of UAVs in architecture and urbanism to define the most widely used techniques and delimit the fields of application based on the experimentation published by the scientific community. A scientific mapping was carried out in two stages using the VOSviewerTM software: a scientometric and a bibliometric analysis. This technique allowed us to analyse a large body of literature and bibliographic data to obtain trends, patterns and directions of this domain of knowledge. Then, a literature review was presented, highlighting the relevant information identified in the previous analysis. The fields of application of UAVs were delimited and the most commonly used payload types and the most appropriate post-processing techniques were specified, depending on the aerial mission objective. The fields of application identified included different techniques related to the generation of 3D models, land mapping, construction site monitoring, building surveying to detect structural damage and energy losses and urban remote sensing. The literature review showed that UAVs provide a useful multi-tasking tool at any stage of an architectural project. These techniques can be applied to buildings or public spaces from the design and construction processes when the project is initiated to the later stages of maintenance and inspection of the building during its life cycle.

25 November 2020 in Energies
Verified
Journal Article
Open access
PDF file
MVMarta Videras
Marta Videras
ACAntonio Sanchez Cordero
Antonio Sanchez Cordero
Sergio MelgarSergio Melgar
Sergio Melgar
JAJosé Manuel Andújar
José Manuel Andújar
The growing concern about global climate change extends to different professional sectors. In the building industry, the energy consumption of buildings becomes a factor susceptible to change due to the direct relationship between the outside temperature and the energy needed to cool and heat the internal space. This document aims to estimate the energy consumption of a Minimum Energy Building (MEB) in different scenarios—past, present, and future—in the subtropical climate typical of seaside cities in Southern Spain. The building energy consumption has been predicted using dynamic building energy simulation software tools. Projected climate data were obtained in four time periods (Historical, the 2020s, 2050s, and 2080s), based on four emission scenarios defined by the Intergovernmental Panel on Climate Change (IPCC): B1, B2, A2, A1F1. This methodology has been mathematically complemented to obtain data in closer time frames (2025 and 2030). In addition, different mitigation strategies have been proposed to counteract the impact of climate change in the distant future. The different energy simulations carried on show clearly future trends of growth in total building energy consumption and how current building designers could be underestimating the problem of air conditioning needs in the subtropical zone. Electricity demand for heating is expected to decrease almost completely, while electricity demand for cooling increases considerably. The changes predicted are significant in all scenarios and periods, concluding an increase of between 28–51% in total primary energy consumption during the building life cycle. The proposed mitigation strategies show improvements in energy demands in a range of 11–14% and they could be considered in the initial stages of project design or incorporated in the future as the impact of climate change becomes more pronounced.

18 November 2020 in Energies
Verified
Journal Article
Open access
PDF file
Sergio MelgarSergio Melgar
Sergio Melgar
ACAntonio Sanchez Cordero
Antonio Sanchez Cordero
MVMarta Videras
Marta Videras
JAJosé Manuel Andújar
José Manuel Andújar
The construction sector is a great contributor to global warming both in new and existing buildings. Minimum energy buildings (MEBs) demand as little energy as possible, with an optimized architectural design, which includes passive solutions. In addition, these buildings consume as low energy as possible introducing efficient facilities. Finally, they produce renewable energy on-site to become zero energy buildings (ZEBs) or even plus zero energy buildings (+ZEB). In this paper, a deep analysis of the energy use and renewable energy production of a social dwelling was carried out based on data measurements. Unfortunately, in residential buildings, most renewable energy production occurs at a different time than energy demand. Furthermore, energy storage batteries for these facilities are expensive and require significant maintenance. The present research proposes a strategy, which involves rescheduling energy demand by changing the habits of the occupants in terms of domestic hot water (DHW) consumption, cooking, and washing. Rescheduling these three electric circuits increases the usability of the renewable energy produced on-site, reducing the misused energy from 52.84% to 25.14%, as well as decreasing electricity costs by 58.46%.

28 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ACAntonio Sanchez Cordero
Antonio Sanchez Cordero
Sergio MelgarSergio Melgar
Sergio Melgar
JAJosé Manuel Andújar
José Manuel Andújar
The need for energy-efficient buildings must be based on strong effective passive-design techniques, which coordinate indoor air quality and thermal comfort. This research describes the principles, simulation, implementation, and monitoring of two different natural cross-ventilation algorithm scenarios applied to a school-building case study affected by a subtropical climate during the winter season. These ventilation protocols, the steady and dynamic versions, can control the carbon dioxide concentration and actuate the window openings according to pre-defined window-to-wall ratios. The implementation of the monitoring process during three non-consecutive days in the winter of 2021 validates the opening strategy to maintain carbon dioxide below 800 ppm, described by the protocol Hygiene Measures Against COVID-19, and the temperature within the comfort ranges suggested by the adaptive UNE-EN 16798. The study shows that a steady opening of 2.16% window-to-wall equivalent ratio can be enough to maintain the requested comfort and carbon dioxide conditions. The use of the dynamic window ratios, from 0.23% to 2.16%, modified according to the measured carbon dioxide concentration, can partially maintain the carbon dioxide below the required limits for ASHRAE 62.1, Hygiene Measures Against COVID-19 and UNE-EN 16798 between 48.28% to 74.14% of the time. However, the carbon dioxide limit proposed by RITE, 500 ppm, is only achieved for 15.52% of the time, which demonstrates the inadequacy of the natural ventilation to fulfil the standard. Further improvements in the dynamic control of the openings in these buildings could lead to lower carbon dioxide concentrations while maintaining the thermal comfort in mild winter climates.

9 February 2021
Verified
Conference Paper
Open access
PDF file
ACAntonio Sanchez Cordero
Antonio Sanchez Cordero
MRMarta Videras Rodríguez
Marta Videras Rodríguez
SMSergio Gómez Melgar
Sergio Gómez Melgar
JAJosé Manuel Andújar
José Manuel Andújar
Recently, several urban sustainability assessment tools (USAT) have appeared to reduce the human impact provided by the built environment. Few of them focus on the assessment of urban spaces like squares, streets, and parks, etc., but they don’t operation and maintenance (OM) phase is not considered. It would be necessary to develop an in use holistic urban sustainable assessment tool (UHU2SAT) to specifically assess urban spaces under OM phase. This paper provides a qualitative research among 188 studies, with the aim to classify them according to the impacts they pursue: environmental (ENV), social (SOC) economic (ECO) and Others. Finally, the SOC criteria are reduced up to 21 and arranged into 4 different groups: Human comfort, Urban mobility, SOC Cohesion, and Health & safety. These SOC criteria have been discussed and revised according to the literature review to identify the most suitable indicators for the UHU2SAT. Finally, it can be concluded that this methodology could also be useful to obtain ENV and ECO criteria to provide a holistic assessment of the sustainability.