The effect of partial shading in photovoltaic (PV) panels is one of the biggest problems regarding power losses in PV systems. When the irradiance pattern throughout a PV panel is inequal, some cells with the possibility of higher power production will produce less and start to deteriorate. The objective of this research work is to present, test and discuss different techniques to help mitigate partial shading in PV panels, observing and commenting the advantages and disadvantages for different PV technologies under different operating conditions. The motivation is to contribute with research, simulation, and experimental work. Several state-of-the-artsolutions to the problem will be presented: different topologies in the interconnection of the panels; different PV system architectures, and also introducing new solution hypotheses, such as different cell interconnections topologies. Alongside, benefits and limitations will be discussed. To obtain actual results, the simulation work was conducted by creating MATLAB/Simulink models for each different technique tested, all centered around the 1M5P PV cell model. The several techniques tested will also take into account different patterns and sizes of partial shading, different PV panel technologies, different values of source irradiation, and different PV array sizes. The results will be discussed and validated by experimental tests.
The world is witnessing a tide of change in the photovoltaic industry like never before; we are far from the solar cells of ten years ago that only had 15–18% efficiency. More and more, multi-junction technologies seem to be the future for photovoltaics, with these technologies already hitting the mark of 30% under 1-sun. This work focuses especially on a state-of-the-art triple-junction solar cell, the GaInP/GaInAs/Ge lattice-matched, that is currently being used in most satellites and concentrator photovoltaic systems. The three subcells are first analyzed individually and then the whole cell is put together and simulated. The typical figures-of-merit are extracted; all the curves obtained are presented, along with the external quantum efficiencies. A study on how temperature affects the cell was done, given its relevance when talking about space applications. An overall optimization of the cell is also elaborated; the cell’s thickness and doping are changed so that maximum efficiency can be reached. For a better understanding of how varying both these properties affect efficiency, graphic 3D plots were computed based on the obtained results. Considering this optimization, an improvement of 0.2343% on the cell’s efficiency is obtained.
In this work, the study of different remuneration schemes for the implementation of a solar energy system on a building was performed. The photovoltaic system was implemented on a public educational building, and four different schemes are compared to understand the economic feasibility of self-consuming solar energy with and without a battery system, versus selling to the electricity grid. The system performance is compared to the building’s needs, and the different consumption and grid-injection shares are analyzed. Three of the schemes are applied according to the conditions and requirements of the Portuguese Law, while the remaining one is not yet allowed, and so the legislation from another chosen country is considered. Lastly, a financial analysis was performed to evaluate and compare the feasibility of each project implementation. The results of this analysis show that both the non-legislated and legislated self-consumption schemes make for an attractive investment, and that savings resulting from the consumption of solar energy are much higher than the revenues from selling to the grid, which presents as the least attractive scheme. Finally, the battery implementation also does not show feasibility because the cost of technology is still too high, despite the reduction witnessed in recent years.
In this paper, an autonomous photovoltaic system is going to be designed for the North Tower of Instituto Superior Técnico through the application of solar panels on its windows, using them as producers of electricity based on solar energy. The main objectives of this paper are: (1) to make the building energetically autonomous, using an integrated system of solar photovoltaic technology; (2) check the system behaviour and comment on possible system impacts on the user’s lifestyle. Two solutions are going to be proposed to cover/substitute the windows of the Tower, one using amorphous silicon panels and the other using crystalline silicon panels. Taking into account this type of solution, it is possible to recognize that there are positive impacts, such as the reduction of transmission lines/grids or the decentralisation of energy supplies. However, there are also disadvantages such as the need to have an energy storage system to guarantee the continuous supply. This study, for this building in particular, shows that organic photovoltaic cells have enormous advantages in the future in terms of our environment and social needs, but they do not yet produce the energy needed to meet today’s needs. Both solutions present a return estimative time of seven years, with an initial investment of approximately two million euros, but the produced energy will not be enough to create an off-grid system.
Solar concentrator photovoltaic collectors are able to deliver energy at higher temperatures for the same irradiances, since they are related to smaller areas for which heat losses occur. However, to ensure the system reliability, adequate collector geometry and appropriate choice of the materials used in these systems will be crucial. The present work focuses on the re-design of the Concentrating Photovoltaic system (C-PV) collector reflector presently manufactured by the company Solarus, together with an analysis based on the annual assessment of the solar irradiance in the collector. An open-source ray tracing code (Soltrace) is used to accomplish the modelling of optical systems in concentrating solar power applications. Symmetric parabolic reflector configurations are seen to improve the PV system performance when compared to the conventional structures currently used by Solarus. The parabolic geometries, using either symmetrically or asymmetrically placed receivers inside the collector, accomplished both the performance and cost-effectiveness goals: for almost the same area or costs, the new proposals for the PV system may be in some cases 70% more effective as far as energy output is concerned.