Photovoltaic technology has become a huge industry, based on the enormous applications for solar cells. In the 19th century, when photoelectric experiences started to be conducted, it would be unexpected that these optoelectronic devices would act as an essential energy source, fighting the ecological footprint brought by non-renewable sources, since the industrial revolution. Renewable energy, where photovoltaic technology has an important role, is present in 3 out of 17 United Nations 2030 goals. However, this path cannot be taken without industry and research innovation. This article aims to review and summarise all the meaningful milestones from photovoltaics history. Additionally, an extended review of the advantages and disadvantages among different technologies is done. Photovoltaics fundamentals are also presented from the photoelectric effect on a p-n junction to the electrical performance characterisation and modelling. Cells’ performance under unusual conditions are summarised, such as due to temperature variation or shading. Finally, some applications are presented and some project feasibility indicators are analysed. Thus, the review presented in this article aims to clarify to readers noteworthy milestones in photovoltaics history, summarise its fundamentals and remarkable applications to catch the attention of new researchers for this interesting field.
30 January 2024 in Energy for Sustainable Development
Thin-film modules are emerging in the photovoltaic market, due to their competitive cost compared to the traditional crystalline silicon modules. The thin-film cells CuIn(1−x)GaxSe2 (Copper Indium Gallium Selenide – CIGS) are predominating the expansion in the photovoltaic market, due to the low temperature coefficient and the ability to absorb ultraviolet (UV) and infrared (IR) radiation. A comparative study between photovoltaic technologies is conducted. Initially, comparisons are made among different photovoltaic modules based on theoretical data. To corroborate it, simulations are performed, using PSpice, based on the model 1M5P. To study light propagation through solar cells, 2D simulations are conducted in a Finite Element Tool, leading to an analysis of absorption and power flow. Experimental tests are carried out to analyze cell performance in a real environment. Optical filters are used to validate simulations. Although the knowledge of technologies is different, the results show the CIGS performance is increasingly closer to that of silicon cells.
The effect of partial shading in photovoltaic (PV) panels is one of the biggest problems regarding power losses in PV systems. When the irradiance pattern throughout a PV panel is inequal, some cells with the possibility of higher power production will produce less and start to deteriorate. The objective of this research work is to present, test and discuss different techniques to help mitigate partial shading in PV panels, observing and commenting the advantages and disadvantages for different PV technologies under different operating conditions. The motivation is to contribute with research, simulation, and experimental work. Several state-of-the-artsolutions to the problem will be presented: different topologies in the interconnection of the panels; different PV system architectures, and also introducing new solution hypotheses, such as different cell interconnections topologies. Alongside, benefits and limitations will be discussed. To obtain actual results, the simulation work was conducted by creating MATLAB/Simulink models for each different technique tested, all centered around the 1M5P PV cell model. The several techniques tested will also take into account different patterns and sizes of partial shading, different PV panel technologies, different values of source irradiation, and different PV array sizes. The results will be discussed and validated by experimental tests.
At nano-scale new phenomena have been discovered, allowing devices’ miniaturisation, energy harvesting, and power reduction. The Extraordinary Optical Transmission (EOT) phenomenon was reported in 1998 by Ebessen, who stated that the resonant peaks in the response of metallic nano antennas were more intense than predicted by classical diffraction theories. Years later, the main reason for this behaviour was attributed to the Surface Plasmon Polaritons (SPP), at least in ultraviolet and visible regions. In this article, a new method to model the radiation-matter interaction on a dielectric-metal interface is proposed, based on Maxwell’s equations and Fresnel Coefficients in absorbing media. Transmission percentage, angle and propagation length are obtained for a rigorous sweep on incident angle and wavelength. The results taken using some noble metals allow us to observe the presence of surface phenomena at expected SPP resonances. First, it is noticeable huge values of transmission in ultraviolet and visible regions, meaning that the metal does not reflect all the radiation. Also, the transmission angle tends to be higher, meaning huge surface components. Furthermore, the transmission length is on orders of 50-100 nm, meaning that phenomena as EOT only occurs at the nano-scale, since waves should arrive at another interface before being absorbed.
The world is witnessing a tide of change in the photovoltaic industry like never before; we are far from the solar cells of ten years ago that only had 15–18% efficiency. More and more, multi-junction technologies seem to be the future for photovoltaics, with these technologies already hitting the mark of 30% under 1-sun. This work focuses especially on a state-of-the-art triple-junction solar cell, the GaInP/GaInAs/Ge lattice-matched, that is currently being used in most satellites and concentrator photovoltaic systems. The three subcells are first analyzed individually and then the whole cell is put together and simulated. The typical figures-of-merit are extracted; all the curves obtained are presented, along with the external quantum efficiencies. A study on how temperature affects the cell was done, given its relevance when talking about space applications. An overall optimization of the cell is also elaborated; the cell’s thickness and doping are changed so that maximum efficiency can be reached. For a better understanding of how varying both these properties affect efficiency, graphic 3D plots were computed based on the obtained results. Considering this optimization, an improvement of 0.2343% on the cell’s efficiency is obtained.