Nanoparticle-based lubricants, or nanolubricants, can exhibit superior tribological properties compared to unmodified base oils. However, these performance gains are highly dependent on the nanoparticle surface chemistry, particularly in maintaining stable colloidal dispersions. This study explores the influence of oleic acid (OA) and oleylamine (OAm) functionalization on the tribological and colloidal properties of CuO nanoparticles dispersed in an SAE 20W50 base oil. We present a hybrid optimization framework combining Response Surface Methodology (RSM) with Bayesian Optimization (BO) to identify the optimal OA to OAm ratio (OA–OAm) for CuO nanolubricants. Unlike prior studies that employed either RSM alone or trial-and-error approaches, this integrated method enables precise tuning of ligand ratios, achieving balanced tribological performance and colloidal stability. Characterization techniques, including UV–vis spectroscopy, FTIR, Raman spectroscopy, and TGA, were employed to investigate dispersion stability. Results demonstrate that OA/OAm-functionalized CuO nanoparticles exhibit improved dispersion stability and reduced sedimentation compared to non-functionalized counterparts. Tribological evaluations using the four-ball test revealed that the ligand-tuned CuO nanolubricants maintained their tribological enhancements under a variety of additive loadings and ligand combinations, with an improvement ranging from 44.9% to 60.6% in the coefficient of friction (COF) and from 29.2% to 63.9% in the specific wear rate (SWR). For the colloidal stability, OA/OAm-functionalized CuO nanoparticles exhibited a 75% reduction in sedimentation rate (k = 0.003 day−1) compared to unfunctionalized CuO (k = 0.012 day−1). Finally, the high thermal stability of the functionalized nanoparticles ensures their suitability for high-performance applications. Overall, this work represents a crucial step towards commercial applications of CuO-enhanced lubricants.
One of the main factors affecting the reliability of computational fluid dynamics (CFD) simulations for the urban environment is the Horizontal Homogeneity of the Atmospheric Boundary Layer (HHABL) profile—meaning the vertical profiles of the mean streamwise velocity, the turbulent kinetic energy, and dissipation rate are maintained throughout the streamwise direction of the computational domain. This paper investigates the preservation of the HHABL profile using three different commercial CFD codes—the ANSYS Fluent, the ANSYS CFD, and the Siemens STAR-CCM+ software. Three different cases were considered, identified by their different inlet conditions for the inlet velocity, turbulent kinetic energy, and dissipation rate profiles. Simulations were carried out using the RANS k-ε turbulence model. Slight variations in the eddy viscosity models, as well as in the wall boundary conditions, were identified in the different software, with the standard wall function with roughness being implemented in the Fluent applications, the scalable wall function with roughness in the CFX applications, and the blended wall function option in the STAR-CCM+ simulations. There was a slight difference in the meshing approach in the three different software, with a prism-layer option in the STAR-CCM+ software, which allowed a finer mesh near the wall/ground boundary. The results show all three software are able to preserve the horizontal homogeneity of the ABL—less than 0.5% difference between the software—indicating very similar degrees of accuracy.