Ahmed A. Abdel-Rehim Abd El-Azim

Prof. Ahmed A. Abdel-Rehim Abd El-Azim


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 February 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
AEAhmed A. Abdel-Rehim Abd El-Azim
Ahmed A. Abdel-Rehim Abd El-Azim
Sayed AklSayed Akl
Sayed Akl
SEsherif elsoudy
sherif elsoudy
In this study, tribological properties of custom formulated and stabilized nano lubricant are investigated. Spherical CuO nanoparticles are suspended in 20W-50 mineral base lubricant using Oleic Acid (OA) as a surfactant. Three different nano lubricant concentrations with 0.2, 0.5, and 1 wt.% were analyzed through ASTM G-99 pin-on-disc tribometer standardized test under boundary/mixed lubrication regimes. The generated friction and wear analyses confirm a consolidation of tribological properties with a reduction in friction coefficient in the range of 14.59–42.92%, compared with the base lubricant. Analysis of worn surfaces (SEM/EDX) as well as (AFM) was conducted. Combined hypotheses were proposed from the analysis of worn surfaces; these hypotheses suggested that CuO nanoparticles exhibit an integrated effect of two phenomenal lubrication mechanisms. Additionally, dispersion stability evaluation of the suspended nanoparticles was performed through Zeta potential, (FTIR), and sedimentation analyses. Stability results showed that steric stabilization is the dominating effect of the repulsive forces between nanoparticles, surpassing the electrostatic repulsive forces.

27 August 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
Sayed AklSayed Akl
Sayed Akl
SEsherif elsoudy
sherif elsoudy
AEAhmed A. Abdel-Rehim Abd El-Azim
Ahmed A. Abdel-Rehim Abd El-Azim
SMSerageldin Mohamed
Serageldin Mohamed
MEMark Ellis
Mark Ellis
Reducing power losses in engines is considered a key parameter of their efficiency improvement. Nanotechnology, as an interface technology, is considered one of the most promising strategies for this purpose. As a consumable liquid, researchers have studied nanolubricants through the last decade as potential engine oil. Nanolubricants were shown to cause a considerable reduction in the engine frictional and thermal losses, and fuel consumption as well. Despite that, numerous drawbacks regarding the quality of the processed nanolubricants were discerned. This includes the dispersion stability of these fluids and the lack of actual engine experiments. It has been shown that the selection criteria of nanoparticles to be used as lubricant additives for internal combustion engines is considered a complex process. Many factors have to be considered to investigate and follow up with their characteristics. The selection methodology includes tribological and rheological behaviours, thermal stability, dispersion stability, as well as engine performance. Through the last decade, studies on nanolubricants related to internal combustion engines focused only on one to three of these factors, with little concern towards the other factors that would have a considerable effect on their final behaviour. In this review study, recent works concerning nanolubricants are discussed and summarized. A complete image of the designing parameters for this approach is presented, to afford an effective product as engine lubricant.

12 August 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
SEsherif elsoudy
sherif elsoudy
Sayed AklSayed Akl
Sayed Akl
AEAhmed A. Abdel-Rehim Abd El-Azim
Ahmed A. Abdel-Rehim Abd El-Azim
ELEsme Lane
Esme Lane
AHAbas Hadawey
Abas Hadawey
PHPhilip Howes
Philip Howes
Nanoparticle-based lubricants, or nanolubricants, can exhibit superior tribological properties compared to unmodified base oils. However, these performance gains are highly dependent on the nanoparticle surface chemistry, particularly in maintaining stable colloidal dispersions. This study explores the influence of oleic acid (OA) and oleylamine (OAm) functionalization on the tribological and colloidal properties of CuO nanoparticles dispersed in an SAE 20W50 base oil. We present a hybrid optimization framework combining Response Surface Methodology (RSM) with Bayesian Optimization (BO) to identify the optimal OA to OAm ratio (OA–OAm) for CuO nanolubricants. Unlike prior studies that employed either RSM alone or trial-and-error approaches, this integrated method enables precise tuning of ligand ratios, achieving balanced tribological performance and colloidal stability. Characterization techniques, including UV–vis spectroscopy, FTIR, Raman spectroscopy, and TGA, were employed to investigate dispersion stability. Results demonstrate that OA/OAm-functionalized CuO nanoparticles exhibit improved dispersion stability and reduced sedimentation compared to non-functionalized counterparts. Tribological evaluations using the four-ball test revealed that the ligand-tuned CuO nanolubricants maintained their tribological enhancements under a variety of additive loadings and ligand combinations, with an improvement ranging from 44.9% to 60.6% in the coefficient of friction (COF) and from 29.2% to 63.9% in the specific wear rate (SWR). For the colloidal stability, OA/OAm-functionalized CuO nanoparticles exhibited a 75% reduction in sedimentation rate (k = 0.003 day−1) compared to unfunctionalized CuO (k = 0.012 day−1). Finally, the high thermal stability of the functionalized nanoparticles ensures their suitability for high-performance applications. Overall, this work represents a crucial step towards commercial applications of CuO-enhanced lubricants.

30 December 2014 in International Journal of Automotive Engineering and Technologies
Verified
Journal Article
Closed access
PDF file
MAMohamed Suliman Attia
Mohamed Suliman Attia
AEAhmed A. Abdel-Rehim Abd El-Azim
Ahmed A. Abdel-Rehim Abd El-Azim
OBOsama Ahmed Badr
Osama Ahmed Badr
SESalah Hassan El-Emam
Salah Hassan El-Emam
Natural gas plays an important role as an alternative fuel for gasoline and diesel engines. It has a promising future especially with the world crisis in fuel and the lower prices of natural gas compared to the prices of gasoline and diesel fuels. It can be used as a sole fuel in spark ignition engines because it has nearly similar properties as gasoline, but in diesel engines it is used as a main fuel while the diesel fuel is injected to the combustion chamber as a pilot fuel to be an ignition source. This paper investigates the performance of a small dual fuel engine where a single cylinder, four stroke water cooled diesel engine is converted to run on a dual fuel of diesel and compressed natural gas (CNG). An exhaust gas recycling system is used to introduce two ratios of EGR (Exhaust gas recirculation) to the engine. Effects of percentage of natural gas content and EGR ratio on engine performance and emissions are investigated for different engine loads. Based on the obtained experimental results, it can be concluded that the total reduction in engine thermal efficiency increases as the ratio of the used natural gas increases. A maximum reduction of about 5 % in engine efficiency is recorded when 80% of diesel fuel is replaced by natural gas to deliver the same engine power. Also, NOx emissions are decreased while CO is increased with utilization of EGR. Özet: Doğal gaz benzinli ve dizel motorlar için alternatif bir yakıt olarak önemli bir role sahiptir. Özellikle yakıtlar konusunda dünyada yaşanan krizle birlikte ve benzin ile dizel yakıtlarının fiyatlarıyla karşılaştırıldığında ucuz fiyatıyla umut vadeden bir geleceğe sahiptir. Benzinli motorlarda tek başına yakıt olarak kullanılabilir çünkü benzin ile benzer özelliklere sahiptir fakat dizel motorlarında dizel yakıt ateşleyici ön yakıt olarak kullanılırken CNG ana yakıt olarak kullanılabilir. Bu makale, tek silindirli, dört zamanlı su soğutmalı dizel motorunun dizel yakıt ve sıkıştırılmış doğal gazın (CNG) birlikte yakıt olarak kullanılabildiği bir motora dönüştürüldüğü durum için küçük bir çift yakıtlı motorun performansını incelemektedir. Motora EGR’nin (Egzoz gazı resirkülasyonu) iki oranını uygulamak için bir egzoz gazı resirkülasyon sistemi kullanılmıştır. Farklı motor yükleri için doğal gaz içeriğinin farklı yüzdelerinin ve EGR oranlarının motor performansına ve egzoz emisyonlarına etkileri incelenmiştir. Elde edilen deneysel sonuçlar temelinde kullanılan doğal gaz oranı arttıkça motor termal verimindeki azalmanın arttığı sonucuna varılabilir. Aynı motor gücünü sağlamak için dizel yakıtın %80’i doğal gaz ile yer değiştirildiğinde maksimum %5 motor verimi azalması kaydedilmiştir. Ayrıca EGR kullanıldığında NOx emisyonları azalırken CO artmaktadır.


9 November 2012
Verified
Conference Paper
Closed access
PDF file
AEAhmed A. Abdel-Rehim Abd El-Azim
Ahmed A. Abdel-Rehim Abd El-Azim
BABahy S. A. Abdel-Mesih
Bahy S. A. Abdel-Mesih
JAJamal E. Alostaz
Jamal E. Alostaz
Fuel cells and photovoltaic cells are two promising technologies for green sustainable societies. Both are technologies that are capable of producing electricity but with different techniques. A solar cell converts light directly into electricity by the photovoltaic effect. On the other hand, a fuel cell converts the chemical energy from the reaction between oxygen and a fuel into electricity and water. The fuel used is hydrogen which can be produced using solar energy. Both devices have different working principles, operation requirements, and efficiencies. However, they share the end goal of producing electricity from a non-fossil clean energy source. The main objective of this work is to investigate whether fuel cells or solar cells are more feasible for domestic use by considering the available technologies and information. The comparison is based on the electricity produced by the two technologies provided the same input of energy from the sun. The research focuses on the electrical output, their efficiencies, and the cost of purchasing, operation, and thus the cost of energy produced from the whole system. A desalination domestic scale system based on Reverse Osmosis (RO) technique was proposed as an application to consume this energy.