When ionizing radiations interact with polymers, free radicals are generated and are known to be the initiating species for the modification in materials. Monitoring and identifying free radicals after irradiation allow assessing the impact of X‐rays and gamma rays on materials. A comparative study has been performed on materials made from polypropylene and polyethylene after irradiation by the two irradiation technologies. Electron spin resonance (ESR) signal has been monitored up to 380 days when signal was still present. ESR signals, concentration profiles, and kinetics were observed after X‐rays and gamma rays.
16 July 2019 in Industrial & Engineering Chemistry Research
The potential changes of single‐use plastic materials (EVA/EVOH/EVA multilayer film in this study) used in biopharmaceutical and food‐packaging industries are investigated after several gamma irradiation doses: 30, 50, 115, and 270 kGy, and for nonsterilized samples (0 kGy) from a point of view of mechanical properties, thermal properties and permeability properties. Tensile tests, differential scanning calorimetry (DSC), oxygen transmission rate (OTR) and water vapor transmission rate (WVTR) are performed on the multilayer film. For irradiation doses below 50 kGy, thermal and water vapor barrier properties are not altered. For higher doses (50 to 270 kGy), mechanical, thermal and water vapor barrier properties are slightly altered whereas oxygen barrier property decreases from 13 to 27 cm3.m−2.day−1. This slight change is shown not to happen due to chain entanglement or chain mobility loss in the amorphous phase of the different polymers. It rather comes from a change of the chemical environment of the EVOH layer.
12 November 2019 in Radiation Physics and Chemistry