The aim of this study was to evaluate the production of microbial cellulose films (MCFs) in culture media based on green tea and different carbon sources, using two microbial consortia (COr and CFr). During the fermentation process, there was a reduction in the total soluble solids (TSS) content and pH, as well as an increase in the acidity in all treatments. Furthermore, fluctuations in the total sugar content and proteins during the fermentation process were associated with the consumption of carbon and nitrogen sources, as well as the production of MCFs. In the color analysis, a decrease in the L* value was observed while the rest of the parameters remained stable. Production of films was observed between days 6 and 9 of fermentation; the preferred substrate for COr was glucose (wet base yields = 603.61% and dry base yields = 22.37%), whereas for CFr was dextrose (wet base yields = 601.49% and dry base yields = 28.14%). Finally, the MCFs produced by COr and CFr showed a homogeneous, thick appearance, slight flexibility, and the characteristic brown color of the fermentation medium.

The purpose of this research is to produce and characterize bacterial cellulose (BC) films coated with chitosan (BC-CH). BC films were produced in a fermentation medium based on Camellia sinensis tea and dextrose (12 days at 25 °C) and subsequently treated with coating-forming solutions (CFSs) based on chitosan (BC-CH 0.5%, BC-CH 1.0%, and BC-CH 1.5%). As a result, the FTIR spectra of BC and BC-CH 1.5% showed the main characteristic bands of cellulose and chitosan. In the physicochemical characterization of the films, it was found that the incorporation of the chitosan coatings did not affect the thickness; however, it decreased the luminosity (L*) and increased redness (a*), yellowness (b*), and opacity (75.24%). Additionally, the light absorption properties in the UV-Vis range were improved. Furthermore, the application of the CFSs increased: the solubility (64.91%), the antimicrobial activity against S. aureus (6.55 mm) and E. coli (8.25 mm), as well as the antioxidant activity (57.71% and 24.57% free radical scavenging activity), and the content of total phenols (2.45 mg GAE/g). Finally, our results suggest that the BC-CH films developed in the present study show a potential application as active packaging material for food.

Hydroponic system requires periodic labor, a systematic approach, repetitive motion and a structured environment. Automation, robotics and IoT have allowed farmers to monitoring all the variables in plant, root zone and environment under hydroponics. This research introduces findings in design with real time operating systems based on microcontrollers; pH fuzzy logic control system for nutrient solution in embed and flow hydroponic culture; hydroponic system in combination with automated drip irrigation; expert system-based automation system; automated hydroponics nutrition plants systems; hydroponic management and monitoring system for an intelligent hydroponic system using internet of things and web technology; neural network-based fault detection in hydroponics; additional technologies implemented in hydroponic systems and robotics in hydroponic systems. The above advances will improve the efficiency of hydroponics to increase the quality and quantity of the produce and pose an opportunity for the growth of the hydroponics market in near future.

In this research, muffin-type bakery products were developed based on wheat flour (WF) and mesquite flour (MF) in the following proportions: WFMF 90:10, WFMF 75:25, and WFMF 50:50. The products were characterized based on various properties in which it was possible to observe that the water activity (aw) did not show a significant change with the increase in the concentration of MF. In addition, the increase in the concentration of MF modified the sensory properties (color, odor, flavor, texture, and acceptance), further decreasing the luminosity and increasing the values of the a* and b* coordinates. Moreover, in the texture profile analysis, it was found that the increase in the MF concentration increased hardness, fracturability, and gumminess and decreased adhesiveness and cohesiveness. All the previously mentioned changes were more evident in the WFMF50:50 and, to a lesser degree, in WFMF75:25. In general, in most evaluations realized, the WFMF90:10 treatment was the most similar to the control (without MF). However, WFMMF75:25 provided a higher protein and fiber content and a lower fat content. Finally, it is possible to use the flour obtained from the mesquite fruit to make bakery products since it is an important source of food due to the wide distribution of mesquite in the country.

La carne es un alimento de gran importancia comercial por su alto valor biológico y nutricional. Sus características fisicoquímicas tales como pH, alta actividad acuosa y contenido de nutrientes (proteínas y minerales) lo catalogan como un alimento altamente perecedero y susceptible a la proliferación de microorganismos lo que conlleva a la reducción de su vida de anaquel. Así mismo, este producto es susceptible a la oxidación de sus componentes provocando su deterioro y mermando sus propiedades sensoriales y nutricias. Ante esta problemática se han desarrollado recubrimientos comestibles (RC) a base de biopolímeros como polisacáridos, proteínas y lípidos para la conservación de los productos cárnicos. Se ha demostrado que la incorporación de compuestos activos (agentes antimicrobianos y antioxidantes naturales) en los RC puede reducir de manera significativa el desarrollo de microorganismos deteriorantes y patógenos, prevenir la oxidación lipídica y la rancidez, preservar o reducir la pérdida de atributos sensoriales como el color, olor, sabor y textura, e incrementar la vida de anaquel. Finalmente, la incorporación de la tecnología de RC en la industria cárnica puede alargar la vida útil y evitar importantes pérdidas económicas por el rechazo del consumidor. Por lo tanto, el objetivo de esta investigación fue hacer una revisión sobre estudios recientes en el desarrollo de RC en productos cárnicos con la finalidad de conocer sus efectos en la calidad y vida de anaquel.

Algal biorefineries constitute an emerging platform for the sustainable production of renewable bioproducts; however, their economic viability remains constrained by the high costs associated with microalgal cultivation and biomass harvesting. This study investigated an integrated strategy combining macronutrient optimization with electrocoagulation–flocculation (ECF) harvesting for Chlorella vulgaris. A Central Composite Design (CCD) was employed to optimize concentrations of NaNO₃, KH₂PO₄, and MgSO₄ with the dual objective of maximizing biomass yield and enhancing biocompound content. Subsequently, the ECF process parameters—current density, electrolysis duration, pH, and electrolyte concentration—were optimized to improve harvesting efficiency. Under the optimal macronutrient conditions (NaNO₃: 100.00 mg/L; KH₂PO₄: 222.12 mg/L; MgSO₄: 100.84 mg/L), the model predicted a maximum biomass concentration of 0.475 g/L, along with 32.79% w/w carbohydrates and 6.79 mg/L chlorophyll-a. Optimal ECF harvesting conditions (current: 0.57 A; pH: 4.00; electrolysis time: 12.70 min; electrolyte: 1.74 g/L) achieved a biomass recovery efficiency of 89.51% w/v. These results demonstrate that coupling nutrient optimization with ECF-based harvesting offers a synergistic, scalable, and cost-effective pathway to improve the sustainability of algal biorefineries.