Diamond-like carbon (DLC) films have been extensively applied in industries owing to their excellent characteristics such as high hardness. In particular, there is a growing demand for their use as protective films for mechanical parts owing to their excellent wear resistance and low friction coefficient. DLC films have been deposited by various methods and many deviate from the DLC regions present in the ternary diagrams proposed for sp3 covalent carbon, sp2 covalent carbon, and hydrogen. Consequently, redefining the DLC region on ternary diagrams using DLC coatings for mechanical and electrical components is urgently required. Therefore, we investigate the sp3 ratio, hydrogen content, and other properties of 74 types of amorphous carbon films and present the classification of amorphous carbon films, including DLC. We measured the sp3 ratios and hydrogen content using near-edge X-ray absorption fine structure and Rutherford backscattering-elastic recoil detection analysis under unified conditions. Amorphous carbon films were widely found with nonuniform distribution. The number of carbon atoms in the sp3 covalent carbon without bonding with hydrogen and the logarithm of the hydrogen content were inversely proportional. Further, we elucidated the DLC regions on the ternary diagram, classified the amorphous carbon films, and summarized the characteristics and applications of each type of DLC.
The structural analysis of amorphous carbon films is not only the premise of their unique properties applied in the industrial fields but also the indispensable element on their classification. In this letter, we refurbished the classification of amorphous carbon films based on the optical constants in terms of the refractive index (n) and the extinction coefficient (k). In the selected photon energy range, we defined the maximum of n (En-max) and k at a value more than 10−4 (Ek) to explore the relationship between different classification schemes for amorphous carbon films deposited by different techniques. We found that Ek and En-max of the deposited amorphous carbon films have an exponential relationship with the hydrogen contents. Thus, the spectroscopic ellipsometry analysis can also be used as one of the effective methods for the structural evaluation of the amorphous carbon films.
Corrosion behavior of diamond-like carbon (DLC) films was evaluated via potentiodynamic polarization in a 3.5 wt. % NaCl solution with pH 2 at room temperature. The polarization results elucidated that the corrosion resistance of the films was enhanced with the variation of the chemical compositions and film thicknesses. The use of the spectromicroscopy method in the investigation of the pitting corrosion was a success in this study. Formation of orbital mapping, bonding state, and composition of the DLC films at non-corrosion and corrosion areas indicate the different structures between DLC and graphite oxide. Also, the π* (C=C) and π* (C=O) bonding states were found to increase in the corrosion areas. This finding not only exhibited the increase of sp2 content but also promoted the rise of oxygen atoms in corrosion zones. Consequently, the present results indicate that the synchrotron–based spectromicroscopy plays an important role in the characterization of the corrosion on DLC films.
1 November 2008 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Diamondlike carbon (DLC) deposited by focused-ion-beam chemical vapor deposition (FIB-CVD) has the interesting material characteristics because DLC deposited by FIB-CVD using the gallium (Ga) FIB contained Ga. The DLC wires were subjected to annealing, and it was found that their resistivity and the Ga content of DLC decreased. To understand the reason for the decrease in resistivity, changes in the fine structure and composition of DLC due to annealing were examined by transmission electron microscope electron energy loss spectroscopy and Rutherford backscattering spectroscopy/elastic recoil detection analysis, respectively. The results revealed that the graphite content of DLC increased due to hydrogen (H) elimination induced by annealing. Thus, it was concluded that the resistivity of the annealed DLC wires decreased due to the increase in the graphite content of DLC.
In this paper, the local structure of silicon-containing diamond-like carbon (Si-DLC) films is discussed based on the measurement of C K-edge and Si K-edge near-edge x-ray absorption fine structure (NEXAFS) spectra using the synchrotron radiation of 11 types of Si-DLC film fabricated with various synthesis methods and having different elemental compositions. In the C K-edge NEXAFS spectra of the Si-DLC films, the σ* band shrunk and shifted to the lower-energy side, and the π* peak broadened with an increase in the Si content in the Si-DLC films. However, there were no significant changes observed in the Si K-edge NEXAFS spectra with an increase in the Si content. These results indicate that Si–Si bonding is not formed with precedence in Si-DLC film.
1 June 2010 in Japanese Journal of Applied Physics
The mechanical characteristics of iron-containing nanosprings (Fe-containing nanosprings) fabricated by focused-ion-beam chemical vapor deposition (FIB-CVD) using a ferrocene (C10H10Fe) source gas were investigated. The shear and Young's moduli were 34 and 92 GPa, respectively. We also evaluated the annealing effect of Fe-containing nanosprings and observed a droplet containing Fe and Ga on the nanospring after annealing at 600 °C. The spring constant rapidly decreased after annealing at 600 °C. By scanning electron microscopy energy–dispersive X-ray spectroscopy (SEM–EDX) and transmission electron microscopy energy–dispersive X-ray spectroscopy (TEM–EDX) line analysis, it was confirmed that the decrease in the spring constant was due to Ga removal.