Rui Han

Prof. Dr. Rui Han

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
JTJinhui Tan
Jinhui Tan
ZWZhongzui Wang
Zhongzui Wang
GLGuang-Zhao Li
Guang-Zhao Li
HHHuicong Hu
Huicong Hu
JLJie Li
Jie Li
Dongyan ZhangDongyan Zhang
Dongyan Zhang
Lithium cobalt oxide (LiCoO2), which has been successfully applied in commercial lithium-ion batteries for portable devices, possesses a theoretical specific capacity of 274 mAh g−1. However, its actual capacity is only half of the theoretical specific capacity, because the charging voltage is restricted below 4.2 V. If a higher charging voltage is applied, an irreversible phase transition of LiCoO2 during delithiation would occur, resulting in severe capacity fading. Therefore, it is essential to investigate the electrochemically driven phase transition of LiCoO2 cathode material to approach its theoretical capacity. In this work, it was observed that LiCoO2 partially degraded to Co3O4 after 150 charging-discharging cycles. From the perspective of crystallography, the conventional cell of LiCoO2 was rebuilt to an orthonormal coordinate, and the transition path from layered LiCoO2 to cubic Co3O4 proposed. The theoretical analysis indicated that the electrochemically driven phase transition from LiCoO2 to Co3O4 underwent several stages. Based on this, an experimental verification was made by doping LiCoO2 with Al, In, Mg, and Zr, respectively. The doped samples theoretically predicted behavior. The findings in this study provide insights into the electrochemically driven phase transition in LiCoO2, and the phase transition can be eliminated to improve the capacity of LiCoO2 to its theoretical value.

1 July 2025 in Polymers
Verified
Journal Article
Open access
PDF file
WWWen-yan Wang
Wen-yan Wang
GZGuanxi Zhao
Guanxi Zhao
XMXiao Ma
Xiao Ma
DRDeng-xun Ren
Deng-xun Ren
MNMin Nie
Min Nie
Rui HanRui Han
Rui Han
Type IV hydrogen storage cylinders are pivotal for high-pressure hydrogen storage and transportation, offering advantages such as lightweight design, high hydrogen storage density, and cost efficiency. Polyamide 6 (PA6) has emerged as a promising liner material due to its excellent mechanical strength, chemical resistance, and gas barrier properties. However, challenges remain, including high hydrogen permeability and insufficient mechanical performance under extreme temperature and pressure conditions. This review systematically summarizes recent advances in modification strategies to enhance PA6’s suitability for Type IV hydrogen storage cylinders. Incorporating nanofillers (e.g., graphene, montmorillonite, and carbon nanotubes) significantly reduces hydrogen permeability. In situ polymerization and polymer blending techniques improve toughness and interfacial adhesion (e.g., ternary blends achieve a special increase in impact strength). Multiscale structural design (e.g., biaxial stretching) and process optimization further enhance PA6’s overall performance. Future research should focus on interdisciplinary innovation, standardized testing protocols, and industry–academia collaboration to accelerate the commercialization of PA6-based composites for hydrogen storage applications. This review provides theoretical insights and engineering guidelines for developing high-performance liner materials.

30 January 2024 in Progress in Organic Coatings
Verified
Journal Article
Closed access
SZShuai Zhang
Shuai Zhang
AYAo Yang
Ao Yang
PHPan He
Pan He
YWYike Wang
Yike Wang
YLYu Liu
Yu Liu
Rui HanRui Han
Rui Han

11 March 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ZWZhongzui Wang
Zhongzui Wang
QYQinjie Yang
Qinjie Yang
XZXinmei Zheng
Xinmei Zheng
SZShuai Zhang
Shuai Zhang
PHPan He
Pan He
GCGang Chen
Gang Chen
High-performance thermally conductive composites are increasingly vital due to the accelerated advancements in communication and electronics, driving the demand for efficient thermal management in electronic packaging, light-emitting diodes (LEDs), and energy storage applications. Controlling the orderly arrangement of fillers within a polymer matrix is acknowledged as an essential strategy for developing thermal conductive composites. In this study, isotactic polypropylene/GNP (iPP/GNP) composite filament tailored for fused deposition modeling (FDM) was achieved by combining ball milling with melt extrusion processing. The rheological properties of the composites were thoroughly studied. The shear field and pressure field distributions during the FDM extrusion process were simulated and examined using Polyflow, focusing on the influence of the 3D printing processing flow field on the orientation of GNP within the iPP matrix. Exploiting the unique capabilities of FDM and through strategic printing path design, thermally conductive composites with GNPs oriented in the through-plane direction were 3D printed. At a GNP content of 5 wt%, the as-printed sample demonstrated a thermal conductivity of 0.64 W/m · K, which was 1.5 times the in-plane thermal conductivity for 0.42 W/m · K and triple pure iPP for 0.22 W/m · K. Effective medium theory (EMT) model fitting results indicated a significantly reduced interface thermal resistance in the through-plane direction compared to the in-plane direction. This work shed brilliant light on developing PP-based thermal conductive composites with arbitrarily-customized structures.

12 March 2024 in Polymer Composites
Verified
Journal Article
Closed access
GLGuang-Zhao Li
Guang-Zhao Li
SZShuai Zhang
Shuai Zhang
HYHao Yu
Hao Yu
GLGen Liu
Gen Liu
WWWenyan Wang
Wenyan Wang
Rui HanRui Han
Rui Han

10 September 2024 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
Verified
Journal Article
Closed access
AYAo Yang
Ao Yang
PHPan He
Pan He
GLGuang-Zhao Li
Guang-Zhao Li
JYJiajia Ye
Jiajia Ye
YHYumin Huang
Yumin Huang
SZShuai Zhang
Shuai Zhang